Typical Formulation Ingredients
Phase
Ingredient
Parts by weight
A
Polybutadiene resin (R45HT, Cray Valley)
A
Magnesium oxide (Maglite D, Hallstar)
A
Antioxidant (Resin D, Emerald Performance Materials)
A
Crosslinking coagent (Sartomer 633, Sartomer)
Typical Properties
Initial Lap shear strength CRS to CRS, psi
5% caustic soak, 70 hr, 70°CLap shear strength CRS to CRS, psi
Lap shear strength CRS to CRS, psi (Heat aging, 130°C two weeks)
Resulting Properties
The formulation 1K, Heat Cured Polybutadiene Sealant is for a general purpose heat cured sealant based on polybutadiene resin. Using polybutadiene will provide better hydrolytic stability than other conventional elastomers. Sartomer 633, is a metallic diacrylate coagent, which when added to peroxide-containing sealant formulations co-cures to provide the necessary properties for good sealant performance, especially adhesion. Heat age values (130°C/two weeks) increases over the RT tests. The source of this formulation is Cray Valley.