Typical Formulation Ingredients
Ingredient
Parts by weight
SPUR 1015LM prepolymer (Momentive)
Moisture scavenger (Silquest A-171 silane)
Filler – calcium carbonate
Adhesion promoter (Silquest A-1110 silane)
(Source: Momentive Specialty Polymers)
Typical Properties
Tensile strength at break, N/mm2
Modulus at 100% extension, N/mm2
Cured 2 weeks at 23°C, 60% RH
Resulting Properties
SPUR + 1015LM prepolymer is a silylated polyurethane resin for manufacturing one-part, moisture-curing sealants and adhesives. Plasticizer-free and of relatively low viscosity, it is an excellent base resin for low modulus sealants in building and construction applications where good elastic recovery is required. The table above provides two generic formulations and the resulting physical properties of SPUR based sealants. The properties are measured after curing for two weeks at 23°C and 60% RH.