Typical Formulation Ingredients
Phase
Ingredient
Parts by weight
A
Polyurethane prepolymer (SPUR+, Momentive)
A
Moisture scavenger (Silquest A-171 silane)
A
Filler – calcium carbonate fine
A
Filler – calcium carbonate coarse
A
Thixotropic agent (SiO2)
A
Adhesion promoter (Silquest A-Link 15 silane, Momentive)
A
Catalyst (Formez SUL-11A, Momentive)
Typical Properties
Tensile strength at break, MPa
Modulus at 100% extension, MPa
Cured 2 weeks at 23°C, 60% RH
Resulting Properties
SPUR+ prepolymer is a silylated polyurethane resin for manufacturing one-part, moisture-curing sealants and adhesives. Plasticizer-free and of relatively low viscosity, SPUR+ is an excellent base resin for low modulus sealants in building and construction applications where good elastic recovery is required. The table above provides the resulting physical properties of a SPUR based sealant. The properties are measured after curing for two weeks at 23°C and 60% RH.
The source of 1K Moisture Curing Silane Modified Polyurethane Sealant is Momentive Specialty Polymers.