TAGS: Natural-based Adhesives Sealants
New research conducted by Aquapak Polymers highlights that ‘recycle ready’ adhesives and fully soluble barriers can replace plastics in fiber-based packaging, making it fully recyclable in high volume recycling mills.
The new technology is non-toxic, marine safe, dissolve and subsequently biodegrades, but still provides the much-needed functionality required for food, drink and household product packaging.
Replacing Single-use Plastics
The study was commissioned as the move to replace conventional, hard to recycle and single use plastics has resulted in a wide va¬riety of fiber-based packaging formats combined with alternative functional barriers being introduced into the recovered paper recycling streams.
However, the materials currently being used to give paper the packaging functionality required for products such as food, drink and household goods, are not easily recyclable and mean that the paperboard is rejected because paper mills cannot process the paper and plastic combinations. Instead, they are incinerated or go to landfill.
The research focused on Hydropol™, a com¬mercially available fully soluble, biodigestible barrier polymer, which can be adhesive, or extrusion coated onto paper and brings several benefits to fiber-based packaging, including oil and grease resistance together with a high gas barrier. Hydropol™ has also been shown to increase some paper strength properties (tear, burst, puncture and tensile strength), allowing coated or laminated papers to be heat-sealed for ‘form, fill and seal’ fiber packaging applications.
Hydropol™ is designed to solubilize at the typical re¬pulping temperatures and durations used by high volume recy¬cling mills allowing fiber to be dispersed to make new paper. Independent tests reveal that once solubilized, even when Hydropol™ coated paper forms 20% of the fiber furnish, it is biodegraded in the mills’ anaer¬obic digestion and aerobic activated sludge treatments as part of its intended use. Hydropol™ is non-toxic and biodegradable in the marine environment should it be littered, forming no micro-plastics in the environment.
Maximizing Fiber Recovery Rate to Reach Circular Economy
The results of the study confirm that most laminating adhesives can disrupt the recycling loop; they can ‘lock-in’ valuable fiber and, in some cases, result in more than a quarter of fiber associ¬ated with some adhesive laminated packs being lost from the paper recycling process. Using non-repulpable laminating adhe¬sives could consign paper and board packaging to the ’Don’t Re¬cycle’ category – an undesirable outcome for producers, brands and retailers who are turning to paper fiber-based packaging as the ‘green’ alternative to plastic.
“
Maximizing fiber recovery rates is the goal of a circular economy approach and the design¬ing of recyclability in packaging should focus on the practicali¬ties of fiber recovery in the mill and at eliminating all elements contained in packaging such as adhesives and conven¬tional plastics, which impact on negatively on this process,” said John Williams, chief technical officer at Aquapak and co-author of study whitepaper.
“
The study illustrates the importance of designing-in and test¬ing fiber-based packaging to confirm recyclability under the re¬pulping conditions used by high volume recycling mills. In addition, the work demonstrates that ‘recycle-ready’ packaging adhesives and fully soluble, bio-digestible barrier systems are available to designers to manufacture recyclable fiber-based packaging,” added Williams.
Source: Aquapak Polymers