Vercet™ A1000

Vercet™ A1000 by NatureWorks is a thermoplastic adhesive-grade resin derived from renewable resources. It is designed for use as an adhesive component in formulated products where an amorphous/low melting, high-flow resin is desired. It is effectively used in solvent-borne, hot-melt adhesives, carton-case and packaging adhesive, heat seal applications. The recommended moisture content to prevent viscosity degradation and potential loss of properties is less than 0.005% (50 ppm). Typical drying conditions for Vercet™ A1000 are 8-12 hours at 40°C [104°F] with a dew point of -35°C [-30°F], with an airflow rate of greater than 0.5 cfm/lbs per hour of resin throughput.