The Universal Selection Source: Adhesives Ingredients

Esstech

90
Product Name
Supplier
Description
Blend of bisphenol A glycidyl methacrylate and triethylene glycol dimethacrylate (70:30). Complies with TSCA (Toxic Substance Control Act List)... view more
Urethane dimethacrylate extended with PEG (polyethylene glycol) 400 (60-100 wt./wt. %). It is a clear pale yellow liquid. Exhibits low viscosity and low color. Cures to form a flexible polymer. Its... view more
Urethane dimethacrylate (> 90 wt./ wt.%). It is a clear pale yellow liquid having low viscosity. Slightly soluble in water. Cures to form a light-colored, bisphenol A-free, hard, glassy surface... view more
Urethane dimethacrylate (70-100 wt./wt. %). It is a viscous liquid at room temperature. Forms a soft, yet tough polymer. Complies with TSCA (Toxic Substance Control Act List), 21 CFR of FDA (Food... view more
Urethane dimethacrylate (70-100 wt./wt. %). It is a viscous liquid. Exhibits high flexibility on curing. Forms homopolymer which exhibits unique ability to re-adhere to itself at lower tensile... view more
Urethane tetramethacrylate (70-100 wt./wt. %). It is a viscous liquid. Exhibits low color and low viscosity. Possesses increased cross-linking capacity. Forms polymers with high Shore D hardness... view more
Urethane dimethacrylate (70-100 wt./wt. %). It is a viscous liquid. Exhibits low color and low viscosity. Possesses the ability to re-adhere to itself after breaking. Provides improved flexibility... view more
Urethane dimethacrylate (80-100 wt./wt. %). It is a clear pale yellow liquid. Provides very low shrinkage values upon cure as well as good conversion and enhanced toughness. Exhibits high viscosity... view more
Urethane acrylate (70-100 wt. /wt. %). It is a clear viscous liquid. Possesses high rate of conversion with low average shrinkage stress. Forms a tough polymer. Complies with TSCA (Toxic Substance... view more
Urethane acrylate (70-100 wt. /wt. %). It is a very soft, rubber-like, clear viscous liquid. Possesses very high conversion and very low shrinkage. Complies with TSCA (Toxic Substance Control Act... view more
Esstech
70:30 Blend of oligo [2-hydroxy-2-methyl-1-[4-(1-methylvinyl) phenyl] propanone] and 2-hydroxy-2-methyl-1-phenyl-1-propanone. Acts as a fast curing type-I photo initiator. It is soluble in most... view more
Applications
  • Adhesives
Esstech
Oligo [2-hydroxy-2-methyl-1-[4-(1-methylvinyl) phenyl] propanone] and 2-hydroxy-2-methyl-1-phenyl-1-propanone. Acts as a very fast curing type-I photo initiator. It is soluble in most monomers... view more
Applications
  • Adhesives
Esstech
Hydrophilic fumed silica. Acts as a photoinitiators as well as rheology modifier. Provides excellent gloss and very good anti-settling properties in pigmented systems. Offers better anti caking... view more
Applications
  • Adhesives>Water-based
  • Adhesives>Solvent based
  • Adhesives>Radiation Curing (UV/EB)
Esstech
2-benzyl-2-dimethylamino-1-(4-morpholinphenyl) butanone. Acts as a type-I photo initiator. It is soluble in most monomers, oligomers and pre-polymers but insoluble in water. Exhibits excellent... view more
Applications
  • Adhesives
Esstech
50:50 Liquid blend of 2-hydroxy-2-methyl-1-phenyl-1-propanone and diphenyl (2,4,6-trimethylbenzoyl) phosphine oxide. Acts as a photo initiator. It is soluble in most monomers, oligomers and... view more
Applications
  • Adhesives
Suppliers, do you want more information displayed on your page?

Contact us for our different advertising offers


Contact us

Back to Top