The Universal Selection Source:
Adhesives Ingredients
Epoxies are created by polymerizing a mixture of two starting compounds, the resin and the hardener. Epoxy adhesives are thermosetting resins which solidify by polymerization and, once set, will soften but not melt on heating. Two-part resin/hardener epoxy systems will solidify on mixing (sometimes accelerated by heat), while one-part epoxy adhesives require heat to initiate the reaction of a latent catalyst. The properties of epoxy adhesives are also varied through the use of fillers. Thanks to their versatility and relatively low cost, they find application in wide range of formulations.

5765 subscribers 845 documents
Subscribe to this channel

Mar 2, 2017 | Industry News

Bodo Möller Chemie Establishes Subsidiary in Casablanca, Morocco

Bodo Möller Chemie Group is opening its subsidiary in Casablanca, Morocco. From this location high-quality additives and epoxy resin systems are marketed. It is increasing focus on products for...

Read more

Feb 22, 2017 | Product News

Gelest Unveils SIVATE™, an Activated Amine Functional Silane for Epoxy Adhesives

Gelest has unveiled SIVATE™ A610 activated amine functional silane for use as or a primer for high-speed UV-acrylated urethane cure systems, a coupling agent for high speed epoxy adhesive bonding...

Read more

Feb 14, 2017 | Product News

Graphene 3D Unveils Range of Electrically Conductive Carbon Epoxies

Graphene 3D has unveiled line of highly electrically conductive carbon epoxies. This line of products will be distributed under the G6-EPOXY trade name. G6-Epoxy resin works in different temperature...

Read more

Feb 10, 2017 | Product News

Low-temperature Curing Structural Adhesive by Panacol

Panacol has introduced newly developed structural adhesive Structalit® 8801 T, which cures rapidly at low temperatures. The epoxy adhesive was specially formulated for temperature-sensitive...

Read more

Jan 31, 2017 | Product News

Master Bond Unveils EP30TC, a 2C Epoxy for Potting & Sealing Applications in Aerospace

Formulated for use in demanding thermal management applications, Master Bond EP30TC is a two component epoxy that contains robust thermally conductive filler with very fine particle sizes. This NASA...

Read more

Feb 27, 2017 | Article

Bonding Solutions for Low Surface Energy Substrates

By Edward M. Petrie

Certain polymeric substrates, such as polyolefins, fluoropolymers, and silicone rubber are difficult to bond and present challenges to both the formulator and the end-user. The main reason that...

Read more

Feb 21, 2017 | Product News

Master Bond Develops Low Viscosity Epoxy for Potting and Encapsulation

Master Bond has developed EP30LP-2, a two component epoxy with a low viscosity and a volume resistivity of over 1014 ohm-cm, making it well suited for potting and encapsulation applications. This...

Read more

Feb 13, 2017 | Industry News

New Adhesive Solution for Glass-metal Compounds for Automotive: Lohmann

Lohmann has presented DuploTEC® 10630 SBF, an adhesive solution for glass-metal compounds in the automotive industry. It is based on an epoxy adhesive and is particularly suitable for the permanent...

Read more

Feb 8, 2017 | Industry News

BASF & Grolman Collaborate for Amine-based Curing Agents

BASF and Gustav Grolman strengthen their exclusive collaboration in Europe in the marketing of amine-based curing agents for the professional processing of epoxy resins. Grolman expands the...

Read more

Jan 18, 2017 | Industry News

RPM Acquires Prime Resins, a Producer of Specialty Chemicals for Construction

RPM International has acquired Prime Resins to be part of its USL Group. Prime Resins' product line includes a broad range of polyurethane and epoxy grouts, foams, adhesives and coatings. The USL...

Read more

Showing 41 - 50 of 845 documents matching your search
Back to Top