Typical Formulation Ingredients
Phase
Ingredient
Parts by weight
A
Diluent (Epodil® 740, Evonik)
A
Flexibilizer (Ancarez® 2364, Evonik)
B
Curing agent (Ancamine® 2384, Evonik)
Typical Properties
Gel time, min, 150 gm mass
Strength, psi, at cure temperature of 22°C
Strength, psi, at cure temperature of 4°C
Failure mode, at cure temperature of 22°C
Failure mode, at cure temperature of 4°C
Resulting Properties
Ancarez 2364 flexibilizer formulations exhibit good adhesion to concrete under ambient
and low temperature cure conditions. Unfilled flexibilized formulations were tested at room temperature for adhesion to damp concrete after curing for seven days at both 72°F and 40°F. Results of the dolly pull-off test (ASTM 4541), including adhesive strength and mode of failure, are shown above.