Typical Formulation Ingredients
Ingredient
Parts by weight
Urethane acrylate oligomer (CN973H85 from Sartomer)
Ethoxylated nonyl phenol acrylate (CD504 from Sartomer)
Tackifier - C9 hydrocarbon resin (Norsolene S115 C9 from Cray Valley)
Inhibitor - MEHQ (Aldrich Chemical Co.)
Antioxidtant - Irganox 1010 (Ciba-Geigy Co.)
Photo-initiator - Esacure KIP100F (Lamberti, USA, Inc.)
2(2-ethoxy ethoxy) ethyl acrylate (SR 256 from Sartomer)
(Source: Sartomer Company)
Resulting Properties
The above table shows a starting formulation for a general purpose UV cured pressure sensitive adhesive having a low Tg. Upon curing, these adhesives offer a non-tacky film that provides excellent adhesive strength to a number of different substrates. However, when a specific application requires laminating opaque substrates, EB-curing adhesives may be necessary, since EB cure is not negatively affected by an opaque substrate.