OK
The Universal Selection Source:
Adhesives Ingredients
Industry News

Aremco Introduces Water-based, Environmentally Safe Ceramabond™ 552 Adhesive

Published on 2012-05-21. Author : SpecialChem

Ceramabond™ 552, a new high temperature ceramic adhesive developed by Aremco Products, Inc., is now used to encapsulate and seal high temperature thermocouples used in applications to 3000 °F (1650 °C).

Ceramabond™ 552
Ceramabond™ 552

Ceramabond™ 552 is an advanced, single part, alumina-filled ceramic adhesive that provides exceptional adhesion to ceramics and metals used in applications to 3000 °F (1650 °C). This easy-to-use, dispensable adhesive is also a water-based, environmentally safe material that contains no volatile organic compounds. After setting at room temperature and curing at 200 °F and 500 °F each for 2 hours, respectively, it is resistant to most acids, solvents, fuels and molten metals. Additional properties include a coefficient of thermal expansion of 4.3 ppm/°F, volume resistivity of 108 ohm-cm, dielectric strength of 250 volts/mil, and tensile shear strength of 450 psi.

Ceramabond™ 552 has many other high temperature uses from bonding ceramic gaskets in wood stoves, to electrically insulating sensors, high power resistors, gas igniters, and impellors and degassers used in molten metal processing. This product is available from stock in pint, quart, gallon and five-gallon pails.

About Aremco

Formed in 1965, Aremco's advanced materials division has been a leader in the development and production of technical ceramics, adhesives, coatings, sealants and potting compounds for applications to 3200°F. These materials are used throughout industry in the design of sensors, electrical components and analytical instruments, as well as the maintenance and repair of high temperature process equipment.

Source: Aremco


FEICA 2018 European Adhesive and Sealant Conference and EXPO
Back to Top