Industry News

ATOM Lab Uses Digital Printing of Adhesives for Shoe Manufacturing

Published on 2018-02-20. Author : SpecialChem

TAGS:  Polyurethane Adhesives    

ATOM Lab, the research and innovation business unit of shoe machinery manufacturer ATOM, is presenting a fully-automated process for shoe production for the first time at the Simac Tanning Tech trade fair in Milan from February 20–22, 2018. At its booth in Hall 14, visitors can select 3D-printed soles and uppers, and have customized shoes made for them.

Covestro's Digital Print Experts
Covestro's digital print experts Dr. Jörg Tillack (right)
and Lukas Breuers examine a shoe sole
with an adhesive printed on it.
The most technically challenging step in this process is bonding the outsole to the shoe upper. Covestro developed an efficient solution for this within a very short time. It is based on polyurethane raw materials for adhesives, which are applied to the outsole or upper by means of digital printing.

Digital Printing of Adhesives

  • For the application, ATOM Lab used a variation of the melt layer method (Fused Filament Fabrication, FFF, or Fused Deposition Modeling, FDM).
  • This method uses strands of melt-processable adhesives – so-called filaments – which are melted.
  • The molten adhesive is applied according to a digital print layout.
  • The sole and upper are then joined under pressure. This creates a solid, permanent adhesive bond. 

This application using adhesive filaments is quick and efficient. Furthermore, it is very precise and reproducible, and it is also well suited for absorbent substrates. Due to the use of solid filaments, for example, the subsequent drying process may be dispensed. The adhesive features a high initial strength. Since application takes place from the melt, the adhesive is already activated. If the open time is sufficiently long, the fabricator can dispense with prior heat activation. Thus, two process steps can be saved in total.

Broad Experience in Additive Manufacturing

Covestro benefited from its experience in additive manufacturing with the technology and material solution developed on short notice. The company is involved in conventional printing methods and is currently developing a wide range of materials. Among these are filaments and raw materials for the FFF method, which so far has been used primarily in rapid prototyping.

Polyurethane adhesives have proven to be successful in shoe manufacturing. They are easy to process and result in flexible yet strong and durable adhesive joints with high impact resistance. Covestro offers a comprehensive range of raw materials for one- and two-component adhesives that are often developed in close collaboration with formulators.

Source: Covestro
Nynas Naphthenic Process Oils
Back to Top