OK
The Universal Selection Source:
Adhesives Ingredients
Industry News

Techsil's RTV3080 Thixo Gel Able to Re-seal After Cure

Published on 2011-03-24. Author : SpecialChem

Warwickshire, UK -- With five times the thermal conductivity of normal RTV's, its non greasy consistency and its ability to 're-seal' itself after cure, Techsil's RTV3080 thixo gel offers many benefits for electronic applications such as Lighting, ECU's, Sensors, Avionics, Power Steering Modules and Power Semiconductors.

Its main features include: 1:1 mix ratio and easier to pump than similar existing materials; 1.0w/m/k thermal conductivity; non-greasy consistency means there are no leakages at high or low temperatures; gel is 'self-sealing' allowing probe testing, adjustment to components or disassembly and re-use of parts at end-of-life.

The RTV3080 is flowable but thixotropic meaning that the spread can be controlled, and it is soft enough not to stress components. The thixo gel has the advantage of curing at room temperature with a four-hour gel time, but can be heat-accelerated if needed.

About Techsil

Techsil are industrial suppliers of RTV silicones, adhesives, sealants, encapsulants, conformal coatings, casting and mould making materials to a wide range of manufacturing industries across Europe including Aerospace, Automotive, Medical, Electronics, Railway, Marine, Foundry and Rapid Prototyping. Based in the UK and Germany, Techsilï£İs success has led it to become the largest RTV silicone distribution partner in Europe for Momentive Performance Materials (formerly GE Bayer Silicone), Techsil are also suppliers of: BJB polyurethane casting resins; ITW Devcon structural adhesives; ThreeBond industrial adhesives/sealants; Permatex industrial bonding materials; Power Adhesives Hot Melt adhesives and Glue Guns; and Chemtrend mould release agents.

Source: Techsil


Improve your performance with water soluble epoxy compounds
Back to Top