OK
The Universal Selection Source:
Adhesives Ingredients
Product News

Aremco Unveils Aremco-Bond™ 820 Epoxy System for General Purpose Bonding

Published on 2012-08-16. Author : SpecialChem

Aremco-Bond™ 820, a high temperature, flexible epoxy system developed by Aremco Products, Inc., is now used for general purpose bonding of ceramics, glass, plastics, metals and other substrates for applications to 400 °F (204 °C).

Aremco-Bond™ 820 High Temp Flexible Adhesive Now Available
Aremco-Bond™ 820 High Temp Flexible Adhesive Now Available

Aremco-Bond™820 is a clear, unfilled, 100% solids, 1-to-1 mix ratio, flexible epoxy system which can be used in applications to 400 °F (204 °C). Flexural and tensile shear strengths are 8,000 and 1,200 psi, respectively. The volume resistivity is 2.0 x 1014 ohm-cm; dielectric strength is 860 volts per mil; and the dielectric constant is 6.0 at 1.0 kHz.

Aremco-Bond™ 820 exhibits exceptional adhesion to ceramics, glass, metals and plastics substrates, and demonstrates outstanding chemical resistance to acids, alkalis, organic fluids and salts. Aremco-Bond™ 820 mixes easily in a 1-to-1 ratio, providing a mixed viscosity of 12,000 cps and cure time of 45 minutes at room temperature. The Shore-D hardness is 70 and shrinkage is less than .008 in/in upon curing.

Aremco-Bondt™ 820 is supplied in pre-filled 50ml dispense cartridges, as well as pint, quart, and gallon kits. Cartridges can be loaded to mechanical or pneumatic guns for automatic mixing and dispensing.

About Aremco

Formed in 1965, Aremco's advanced materials division has been a leader in the development and production of technical ceramics, adhesives, coatings, sealants and potting compounds for applications to 3200°F. These materials are used throughout industry in the design of sensors, electrical components and analytical instruments, as well as the maintenance and repair of high temperature process equipment.

Source: Aremco


Improve your performance with water soluble epoxy compounds
Back to Top