OK
The Universal Selection Source:
Adhesives Ingredients
Product News

Zymet Introduces CN-1751-4, a Reworkable Underfill Encapsulant for Flexible Assemblies

Published on 2013-02-13. Author : SpecialChem

EAST HANOVER, NJ -- Zymet has introduced a new reworkable underfill encapsulant, CN-1751-4, that is extraordinarily crack resistant, to withstand flexing experienced by flexible printed circuitry or drops and shocks of very thin printed circuit assemblies.

With ever thinner and lighter products being designed, such as smartphones and tablets, the assembly of advanced packages, such as WL-CSP's and CSP's, on flexible circuitry or on very thin rigid boards has rapidly expanded. This has created a need for an underfill that can withstand more flexing or bending, to prevent underfill fillet cracks and pre-mature device failure. CN-1751-4 is a reworkable underfill that can withstand extraordinary deformation without cracking, yet has a modulus that is higher than that of traditional reworkable underfills.

CN-1751-4 has a low CTE, 48 ppm/°C for superior thermal cycle performance. Its viscosity is only 900 cps, so it can flow quickly across large BGA's and POP's. And, it is very easily reworked.

Rework is accomplished by use of elevated temperature, 170°C to 180°C, to remove the underfill fillet. Then, the BGA is lifted from the board after heating it to reflow temperature. Underfill residue is easily scraped off, again at 170°C to 180°C.

About Zymet

Zymet is a manufacturer of microelectronic and electronic adhesives and encapsulants. Its products include die attach adhesives, substrate adhesives, UV curable glob top and cavity-fill encapsulants, and underfill encapsulants.

Source: Zymet


Improve your performance with water soluble epoxy compounds
Back to Top