ALBERDINGK® Refined LO Winterized by Alberdingk Boley is linseed oil. It stays clear at lower temperatures. ALBERDINGK® Refined LO Winterized is used to make synthetic resins, especially linseed... view more

ALBERDINGK® Refined LO Winterized HQ by Alberdingk Boley is linseed oil. It is used to make synthetic resins, especially linseed alkyds... view more

ALBODRY Castor Oil Low Moisture 1500 by Alberdingk Boley is a polyol component. It is based on a partially demoistured, water-reduced, non-drying, refined oil. Suitable for use as pure or as mixture... view more

ALBODRY Castor Oil Low Moisture 1500 by Alberdingk Boley is a polyol component. It is based on a partially demoistured, water-reduced, non-drying, refined oil. Suitable for use as pure or as mixture... view more

ALBODUR® 102 VP by Alberdingk Boley is a hydrophobic polyol for PU systems including adhesives and sealants. Compatible with most polyether and/ or polyester polyols. It can be blended with other... view more

CASTOR OIL USP by Alnor Oil Company is bio-based, triglyceride oil derived from the seed of the castor plant, genus Ricinus communis. It is recommended for adhesive application... view more

Castor Oil (Alnor) by Alnor Oil Company is bio-based, natural oil obtained from the seed of the Ricinus Communis or castor plant. It is unique among naturally occurring oils in that in that it is the only... view more

Low Moisture Castor Oil by Alnor Oil Company is bio-based, triglyceride oil obtained from the seed of the Ricinus Communis or castor plant. It has a slight characteristic odor. It is produced by removing the moisture... view more

Neutralized Castor Oil by Alnor Oil Company is bio-based, triglyceride oil obtained from the seed of the Ricinus Communis or castor plant. It has faint odor and has been bleached to reduce the acid value. Neutralized Castor Oil is... view more

Pale Pressed Castor Oil by Alnor Oil Company is bio-based, natural oil obtained from the seed of the Ricinus Communis or castor plant. It has a very slight characteristic odor. It is obtained from the first pressing of... view more

Wood Flour by American Wood Fibers is a natural filler and extender in various glue formulations. From the most sophisticated epoxy resins to good old fashion wood glue, wood flour can improve their... view more

Biofene® by Amyris is a tackifier based on renewable, long-chain, branched hydrocarbon molecule called farnesene (trans-ß-farnesene). It replaces compounds made from petrochemicals, with renewable... view more

803L by Arakawa Chemical is terpene phenolic resin derived from rosin, resin from pine trees. Used as a tackifier in chloroprene and hot melt adhesives. 803L offers high softening point and heat... view more

Ester Gum 105 by Arakawa Chemical is rosin ester. It is used as a tackifier in hot melt adhesives. It offers good weather resistance... view more

Rosin ester. Used as a tackifier in hot melt adhesives. Offers good compatibility with EVA... view more

Rosin ester. Used as a tackifier in hot melt adhesives. Offers good compatibility with EVA and natural and synthetic rubber... view more

Rosin ester. Used as a tackifier in hot melt adhesives. Offers good compatibility with EVA and natural and synthetic rubber... view more

Oleris® Dibutyl Sebacate by Arkema is a non-toxic dibutyl sebacate. It is a colorless, odorless, transparent oily liquid. Acts as a cold resistant plasticizer for synthetic resins and rubbers... view more

Oleris® Dimethyl Sebacate by Arkema is a non-toxic dibutyl sebacate. It is a colorless, odorless, transparent oily liquid. Acts as a cold resistant plasticizer for synthetic resins and rubbers. It... view more

SARBIO® 5100 by Arkema is monofunctional acrylate. Offers high solvency and good adhesion characteristics. It is used for UV/EB curing compositions. SARBIO® 5100 contains a minimum BRC (biorenewable... view more

SARBIO® 5101 by Arkema is acrylate monomer. It contains a minimum BRC (biorenewable carbon content) of 80%. Offers low surface tension, high flexibility and good water resistance. SARBIO® 5101... view more

SARBIO® 5102 by Arkema is acrylate monomer. It contains 75% biorenewable carbon content. It offers high glass transition temperature and excellent adhesion. SARBIO® 5102 maintains the flexibility of... view more

Aqualon™ EC (K100) by Ashland is cellulose ether. It is characterized by low flammability and resistance to discoloration in the sunlight. It offers toughness, hardness and reduces or even eliminates the... view more

Drewplus® T-1201 by Ashland is a defoamer or foam control agent. It is formulated without the use of alkylphenolethoxylates (APEO) and are available in a variety of cost-effective chemistries based on... view more

Drewplus® T-2200 by Ashland Specialty Chemical is used as a defoamer. It is formulated without the use of alkylphenolethoxylates (APEO), and are available in a variety of cost-effective chemistries... view more

Drewplus® T-3200 by Ashland Specialty Chemical is a defoamer or foam control agent. It is formulated without the use of alkylphenolethoxylates (APEO), and are available in a variety of... view more