Lupranol® 1000 is polypropylene glycol by BASF. Lupranol® 1000 is used in adhesives and for the production of polyurethane foams and elastomers... view more

Lupranol® 1000/1 is a polypropylene glycol polyol monomer. It is a colorless liquid of low viscosity. It has molecular weight of 2000. Used for the production of polyurethane foams... view more

Lupranol® 1000/2 is a polypropylene glycol polyol monomer. It is a colorless liquid of low viscosity. It has molecular weight of 2000. It differs from conventional polyether polyols in a clearly... view more

Lupranol® 1002/1 is an alkoxylate on the basis of an aliphatic amine monomer. It contains primary hydroxyl end groups. It is a colorless to pale yellow viscous liquid. It has molecular weight of... view more

Lupranol® 1005/1 is a polypropylene glycol polyol monomer. It is a colorless liquid of low viscosity. It has molecular weight of 4000. It differs from conventional polyether polyols in a clearly... view more

Lupranol® 1100 by BASF is a polypropyleneglycol polyol. Used for the production of rigid polyurethane elastomers... view more

Lupranol® 1100/1 is a polypropylene glycol polyol monomer. It is a colorless liquid of low viscosity. It has molecular weight of 1100. Used for the production of polyurethane foams... view more

Lupranol® 1200 is a polypropylene glycol polyol monomer. It is a colorless liquid of low viscosity. It has molecular weight of 450. Used for the production of polyurethane foams... view more

Lupranol® 1301 by BASF is a trifunctional polyether polyol monomer. It is a colorless viscous liquid. It contains only secondary hydroxyl groups. Lupranol® 1301 is used for the production of... view more

Lupranol® 2001 by BASF is a tetrafunctional, highly reactive polyether polyol containing primary hydroxyl groups... view more

Lupranol® 1301 is a trifunctional polyether polyol monomer. It is a colorless viscous liquid. It contains mainly secondary hydroxyl end groups. Used for the production of MDI block foams... view more

Lupranol® 2005/1/BALANCE by BASF is a trifunctional polyether polyol monomer. It is a slightly yellow viscous liquid. It contains mainly secondary hydroxyl end groups. It contains a combination of... view more

Lupranol® 2007/1 by BASF is a trifunctional highly reactive polyether polyol monomer. It is a colorless viscous liquid. It contains primary hydroxyl groups. It contains an antioxidant which is free... view more

Lupranol® 2011/1/PX by BASF is a special mixture of polyols. It is an opaque viscous liquid. It contains an antioxidant combination which is free of BHT (di-t-butyl-hydroxy-toluene). Lupranol®... view more

Lupranol® 2012/1/PX by BASF is a mixture of polyols, additives and P-MDI. Used for the production of viscoelastic slabstock foams... view more

Lupranol® 2012/1/PX by BASF is a mixture of polyols, additives and P-MDI. Used for the production of viscoelastic slabstock foams... view more

Lupranol® 2031 by BASF is a trifunctional polyether polyol containing a certain content of primary hydroxyl groups. Possesses a high reactivity. Lupranol® 2031 also contains an anti-oxidant... view more

Lupranol® 2032 by BASF is a trifunctional polyether polyol monomer. It is a colorless viscous liquid. It has higher reactivity due to presence of primary hydroxyl groups. Lupranol® 2032 is used for... view more

Lupranol® 2043 by BASF is a difunctional highly reactive polyether polyol, which contains primary hydroxyl groups. It contains an antioxidant combination which is free from BHT... view more

Lupranol® 2046 is a trifunctional highly reactive polyether polyol by BASF. It contains primary hydroxyl end groups. Lupranol® 2046 is used for the production of highly elastic flexible... view more

Lupranol® 2048 by BASF is a trifunctional reactive polyether polyol. It contains primary hydroxyl groups. Used in molded applications like flexible foams. Lupranol® 2048 is suitable for adhesive... view more

Lupranol® 2070 is non-reactive, trifunctional polyether polyol with secondary hydroxyl end groups. It contains a combination of stabilizer which is free from 2,6-di-tert.butyl-p-kresol (BHT)... view more

Lupranol® 2072 by BASF is trifunctional polyether polyol and contains predominantly secondary hydroxyl groups. It contains a low-emission and low discoloring antioxidant combination (without BHT)... view more

Lupranol® 2074 by BASF is a trifunctional polyether polyol and contains predominantly secondary hydroxyl groups. It contains an anti-oxidant combination to prevent discoloration of the foam core. It... view more

Lupranol® 2090 by BASF is a trifunctional high reactive polyether polyol which contains primary hydroxyl groups. Used in the production of flexible molded polyurethane foam parts in the cold cure... view more

Lupranol® 2092 by BASF is a trifunctional polyether polyol which contains primary hydroxyl groups. It contains a combination of stabilizer which is free from 2,6-Di-tert.butyl-p-kresol (BHT)... view more

Lupranol® 2095 by BASF is a trifunctional high reactive polyether polyol which contains primary hydroxyl groups. It is free from BHT (2,6-di-t-butyl-hydroxy-toluene). Lupranol® 2095 is used in the... view more

Lupranol® 2100 by BASF is a difunctional polyether polyol based on polyethylene oxide. Used with others polyols for the production of prepolymers... view more

Lupranol® 3300 by BASF is a trifunctional polyether polyol based on glycerine. It contains only secondary hydroxyl groups. Lupranol® 3300 is used for the production of rigid foams out of... view more

Lupranol® 3402 by BASF is a tetra-functional polyether polyol containing ethylenediamine and propylene oxide. Used for the production of flexible and rigid polyurethane foams as well as adhesive... view more

Lupranol® 3424 by BASF is a higher functional polyether polyol based on sorbitol. It contains only secondary hydroxyl groups... view more

Lupranol® 3424 by BASF is a higher functional polyether polyol based on sucrose. It contains only secondary hydroxyl groups. Used in rigid foams... view more

Lupranol® 3424 by BASF is a polyether polyol. It has high functionality and low viscosity. Lupranol® 3424 is used for the production of CFC free rigid foam systems... view more

Lupranol® 3530 by BASF is trifunctional polyether polyol. It has higher reactivity due to its higher content of primary hydroxyl groups... view more

Lupranol® 4002/1 by BASF is a non-reactive polyether polyol monomer. It is an opaque viscous liquid. It has been grafted with styrene-acrylonitrile (SAN) and contains approximately 45 % solids. It... view more

Lupranol® 4003/1 by BASF is a polyether polyol monomer. It is an opaque viscous liquid which has been grafted with styrene-acrylonitrile (SAN) and contains mainly primary hydroxyl end groups. It... view more

Lupranol® 4005/1/SC10 by BASF is a non-reactive polyether polyol monomer. It is an opaque viscous liquid. It has been grafted with styrene-acrylonitrile (SAN) and contains approximately 10% solids... view more

Lupranol® 4005/1/SC15 is a non-reactive polyether polyol monomer. It has been grafted with styrene-acrylonitrile (SAN) and contains approximately 15% solids. It is an opaque viscous liquid. It... view more

Lupranol® 4005/1/SC25 by BASF is a non-reactive polyether polyol grafted with styrene-acrylonitrile (SAN) and contains approximately 25% solids. It forms a stable dispersion which does not separate... view more

Lupranol® 4006/1/SC10 by BASF is a non-reactive polyether polyol grafted with styrene-acrylonitrile (SAN) and contains approximately 10% solids. It forms a stable dispersion which does not separate... view more

Lupranol® 4006/1/SC15 by BASF is a non-reactive polyether polyol. It is an opaque viscous liquid. It has been grafted with styrene-acrylonitrile (SAN) and contains approximately 15% solids. It... view more

Lupranol® 4006/1/SC25 by BASF is polyether polyol monomer. It is a non-reactive opaque viscous liquid. It has been grafted with styrene-acrylonitrile (SAN) and contains approximately 25% solids. It... view more

Lupranol®4010/1/SC15 by BASF is polyether polyol which has been grafted with styrene-acrylonitrile (SAN) and contains mainly primary hydroxyl end groups. It contains about 15% solids. It contains a... view more

Lupranol® 4010/1/SC25 by BASF is polyether polyol monomer. It has been grafted with styrene-acrylonitrile (SAN) and contains mainly primary hydroxyl end groups. It contains about 25% solids. It... view more

Lupranol® 4010/1/SC40 by BASF is polyether polyol. It has been grafted with styrene-acrylonitrile (SAN) and contains mainly primary hydroxyl end groups. It contains about 40% solids. It contains a... view more

Lupranol® VP 9272 by BASF is a trifunctional polyether polyol containing a high proportion of secondary hydroxyl groups. Used for the manufacture of adhesives and sealants... view more

Lupranol® VP 9289 by BASF is a trifunctional polyether polyol mainly secondary hydroxyl end groups. It contains antioxidant which is free from BHT (di-t-butyl-hydroxy-toluene). Lupranol® VP 9289 is... view more

Lupraphen® 1608/4 by BASF is a difunctional, aliphatic polyester polyol. It is a colorless to slightly yellow solid. Provides excellent mechanical properties. Lupraphen® 1608/4 is used in adhesive... view more

Lupraphen® 1619/1 by BASF is a slightly branched, aliphatic, polyester polyol. It is slightly yellow, waxlike. Used for the production of polyurethanes... view more

Lupraphen® 1622/1 by BASF is a difunctional, aliphatic polyester polyol. It improves resistance against hydrolysis and is liquid at room temperature. Lupraphen® 1622/1 is used for the production of... view more

Lupraphen® 1901/1 by BASF is a difunctional polyester polyol. It is based on aromatic dicarboxylic acids. Used to improve high temperature performance and fire resistance. It has been developed for... view more

Lupraphen® 2600/1 by BASF is a partially-branched, aliphatic, polyester polyol. It is a colorless to pale yellow, viscous liquid. Used for the production of polyurethanes... view more

Lupraphen® 2600/2 by BASF is a slightly branched, aliphatic, polyester polyol. It is a colorless to slightly yellow viscous liquid. It has a lower reactivity than Lupraphen® 2600/1. Lupraphen®... view more

Lupraphen® 2601/1 by BASF is a partially-branched, aliphatic, polyester polyol. It contains antioxidants to prevent discoloration of the foam core. Lupraphen® 2601/1 is used for the production of... view more

Lupraphen® 2602/1 by BASF is a slightly branched, aliphatic polyester polyol. It is a colorless to slightly yellow viscous liquid. Lupraphen® 2602/1 is used for production of flexible polyurethane... view more

Lupraphen® 2901/1 by BASF is a partially-branched polyester polyol which is stabilized against oxidation. The stabilizer is free from phosphite and BHT (2,6-di-t-butyl-4-methylphenol). It is a... view more

Lupraphen® 5608/1 by BASF is a difunctional, aliphatic, polyester polyol. It is a colorless to slightly yellow viscous liquid. Provides balanced mechanical and flexural properties. Lupraphen® 5608/1... view more

Lupraphen® 5609/1 by BASF is a difunctional, aliphatic, polyester polyol. It is a colorless to slightly yellow viscous liquid. Used for the production of polyurethanes... view more

Lupraphen® 5619/1 by BASF is a saturated aliphatic polyester based on adipic acid. Used for the production of polyurethane systems. Lupraphen® 5619/1 is recommended for adhesive and footwear... view more

Lupraphen® 6601/3 by BASF is a slightly branched, aliphatic, polyester polyol. It is a colorless to slightly yellow viscous liquid. It has a lower reactivity than Lupraphen® 2600/1. Provides... view more

Lupraphen® 8002 by BASF is a solvent free, branched condensation resin based on polyol. Can be combined with isocyanates. Used in solvent free two component systems for adhesives. Reduces the... view more

Lupraphen® 8004 by BASF is a branched, aromatic-aliphatic polyester polyol... view more

Lupraphen® 8100 by BASF is difunctional, aliphatic, polyester polyol. Used for the production of polyurethane elastomers... view more

Lupraphen® 8101 by BASF is difunctional, aliphatic, polyester polyol... view more

Lupraphen® 8103 by BASF is difunctional, aliphatic, polyester polyol. Used for the production of compact and cellular polyurethane elastomers... view more

Lupraphen® 8104 by BASF is aliphatic, difunctional polyester polyol. Used for the production of compact and cellular polyurethane elastomers... view more

Lupraphen® 8105 is a difunctional, aliphatic, polyester polyol by BASF. Used for the production of polyurethane elastomers... view more

Lupraphen® 8106 by BASF is a difunctional, aliphatic, polyester polyol. Possesses low reactivity. Used for the production of polyurethane elastomers... view more

Lupraphen® 8108 by BASF is a difunctional, aliphatic polyester polyol. Used for the production of polyurethane flexible elastomers... view more

Lupraphen® 8109 by BASF is partially-branched, aliphatic polyester polyol. Used for the production of polyurethane flexible elastomers... view more

N,N-Dimethylaminoethyl Methacrylate (DMAEMA) by BASF is a monofunctional acrylate monomer with both methacrylic and amine functional groups. It imparts adhesion, demulsifying effect and water... view more

N-Vinyl-N-Methylacetamide (VIMA) by BASF is the best choice for a wide range of syntheses including polymerization, addition and electro cyclic reactions. Shows high reactivity, exceptional quality... view more

N-Vinyl caprolactam. With high reactivity, exceptional quality and good consistency, it is the best choice for a wide range of syntheses including polymerization, addition and electro cyclic... view more

N-Vinyl-imidazole (VIM) by BASF is a monomer designed for UV curing adhesives. Exhibits high reactivity, exceptional quality and good consistency. It is the best choice for a wide range of synthesis... view more

N-Vinyl-pyrrolidone by BASF is the best choice for a wide range of syntheses including polymerization, addition and electro-cyclic reactions. Shows high reactivity for radical polymerization... view more

Octadecyl vinyl ether (ODVE) by BASF has high reactivity, exceptional quality and good consistency. It is the best choice for a wide range of syntheses including polymerization, addition and electro... view more

Pluracol® 1016 by BASF is a modifying polyol. It is a highly reactive, amine initiated, triol of low equivalent weight with built-in catalytic activity. Pluracol® 1016 is compatible with crude MDI... view more

Pluracol® 1026 by BASF is a high molecular weight triol. It is used to produce high resiliency molded foams which in combination with graft polyols such as Pluracol® 973, process well and are... view more

Pluracol® 1062 by BASF is primary hydroxyl terminated diol. It is a high molecular weight specialty polyol. Pluracol® 1062 is used in manufacturing sealants... view more

Pluracol® 1123 by BASF is primary terminated polyether triol. It has high molecular weight. The high levels of primary hydroxyl capping makes Pluracol® 1123 useful for hydrophilic polyurethane... view more

Pluracol® 1151 by BASF is a high molecular weight triol. It is used to produce high resiliency molded foams which in combination with graft polyols such as Pluracol® 973, process well and are... view more

Pluracol® 1198 by BASF is a primary hydroxyl-terminated graft polyether triol containing approximately 30% solids of copolymerized styrene and acrylonitrile. Used in combination with conventional... view more

Pluracol® 1365 by BASF is grafted polyether polyol containing copolymerized styrene and acrylonitrile. This low functionality polyol is designed to produce flexible slabstock foams with high load... view more

Pluracol® 1385 by BASF is polyether triol. Tt has been formulated with a low volatile inhibitor package designed for either conventional curing or mechanical forced air curing. It provides a... view more

Pluracol® 1388 by BASF is a polyether triol formulated with a low volatile inhibitor package designed for either conventional curing or mechanical forced air curing. It provides a consistent... view more

Pluracol® 1441 by BASF is secondary hydroxyl-terminated graft polyether triol containing approximately 43% solids of copolymerized styrene and acrylonitrile. It has been formulated with a low... view more

Pluracol® 1442 by BASF is secondary hydroxyl-terminated graft polyether triol containing approximately 43% solids of copolymerized styrene and acrylonitrile. This polyol has been formulated with a... view more

Pluracol® 1443 by BASF is secondary hydroxyl-terminated graft polyether triol containing approximately 40% solids of copolymerized styrene and acrylonitrile. It can be used alone for maximum effect... view more

Pluracol® 1477 by BASF is polyol (diol). It is terminated with ethylene oxide which imparts a primary hydroxyl cap to polyol. Used for specialty polyether applications... view more

Pluracol® 1543 by BASF is secondary hydroxyl-terminated graft polyether triol. It contains approximately 44% solids of copolymerized styrene and acrylonitrile. It has been formulated with a low... view more

Pluracol® 1718 by BASF is polyether triol. Used for the production of polyurethane slabstock foam. Pluracol® 1718 can also be used to produce flexible foams with a wide range of properties suitable... view more

Pluracol® 2100 by BASF is a primary terminated conventional triol. It contains a LVI inhibitor package. Pluracol® 2100 is used in combination with Pluracol® 2130 for the production of a broad range... view more

Pluracol® 2115 by BASF is primary hydroxyl-terminated graft polyether triol containing approximately 13.5% solids of copolymerized styrene and acrylonitrile. It contains a LVI inhibitor package. It... view more

Pluracol® 2120 by BASF is primary hydroxyl-terminated graft polyether triol. It contains a LVI inhibitor package. It has approximately 20% solids of copolymerized styrene and acrylonitrile... view more

Pluracol® 2130 by BASF is primary hydroxyl-terminated graft polyether triol. It can be used to produce HR slabstock foams having a narrow spread in cross-sectional density and IFD properties. It... view more

Pluracol® 220 by BASF is a high molecular weight primary hydroxyl terminated polyol. This grade is used in polyurethane sealant formulations... view more

Pluracol® 355 by BASF is amine-based tetrol. It has low equivalent weight and built-in catalytic activity. Pluracol® 355 is used in flexible foams, semi-flexible foams and rigid foams... view more

Pluracol® 381 by BASF is polyether triol. Foams made of this polyol have high tensile, tear and elongation properties in concert with low IFD values. Used in all types of filled foam applications... view more

Pluracol® 538 by BASF is a clear liquid polyol. Exhibits less reactivity. Pluracol® 538 is used in manufacture of high resiliency molded foams, one-shot semi-flexible and microcellular foams which... view more

Pluracol® 637 by BASF is grafted polyether triol containing copolymerized styrene and acrylonitrile. It has low viscosity. This secondary hydroxyl-terminated polyol contains approximately 20%... view more