Adiprene® LFP 850A by Lanxess is PPDI-terminated polyether prepolymer. It possesses very low free PPDI content. This product provides very good dynamics, good tensile/tear strength, very good... view more

Adiprene® LFP 950A by Lanxess is PPDI-terminated polyether prepolymer. It possesses very low free PPDI content, low viscosity and longer pour life. Adiprene® LFP 950A provides very good dynamics... view more

Quasilan® CT 23 by Lanxess is a moisture-curing product based on TDI prepolymer. It can be applied by brush, roller or spray equipment. When fully cured, it forms continuous, flexible films that... view more

Quasilan® CT 29 by Lanxess is TDI based urethane prepolymer, moisture-curing product. When fully cured, it forms continuous, flexible films that help protect against chemicals, abrasion damage as... view more

Trixene® SC 7702 by Lanxess is isocyanate-terminated urethane prepolymer. It is based on aromatic toluene diisocyanate (TDI). Its chemical structure offers a range of flexibility, functionality and... view more

Polymeg 1000 Polyol by LyondellBasell is polytetramethylene ether glycol. It is linear in structure with a backbone of repeating tetramethylene units connected by ether linkages. The chain is capped... view more

Polymeg 2000 Polyol by LyondellBasell is polytetramethylene ether glycols (PTMEG) produced by polymerizing tetrahydrofuran. The chain is capped with primary hydroxyl units. At slightly elevated... view more

SPUR+* 1012 Prepolymer by Momentive Performance Materials is silylated prepolymer that does not rely on an isocyanate curing reactions. It is formulated without the use of phthalate-based... view more

SPUR+* 1015 Prepolymer by Momentive Performance Materials is a plasticizer-free, low viscosity, silylated polyurethane resin for manufacturing one-part, moisture-curing sealants and adhesives. It... view more

SPUR+* 1050 Prepolymer by Momentive Performance Materials is a plasticizer-free, low viscosity silylated prepolymer. It is designed for use in the manufacturing of one-part, moisture-curing... view more

SPUR+* 1060 Prepolymer by Momentive Performance Materials is a low viscosity, plasticizer-free, ethoxysilane-modified resin used in the manufacture of one-part moisture-curing adhesives and... view more

SPUR+* 3030 Prepolymer by Momentive Performance Materials is a low viscsoity, high hydrophobicity, silane-terminated polyurethane. It offers improved heat resistance and can enable broad formulation... view more

Hydrogenated polybutadiene. It is derived by polymerizing butadiene using a living anionic polymerization technique. In addition to its chemical stability, it has hydroxyl groups on both ends as the... view more

Hydrogenated polybutadiene. It is derived by polymerizing butadiene using a living anionic polymerization technique. In addition to its chemical stability, it has hydroxyl groups on both ends as the... view more

Hydrogenated polybutadiene. It is derived by polymerizing butadiene using a living anionic polymerization technique. In addition to its chemical stability, it has hydroxyl groups on both ends as the... view more

Hylene® 9300C by Parker Hannifin is a thermoplastic elastomer based on p-phenylene diisocyanate with a polycaprolactone backbone. Provides very good flex fatigue resistance, superior dynamic... view more

Hylene® PPDI by Parker Hannifin is para-phenylene diisocyanate (PPDI). Used in seals and gaskets for power tools, mining, automotive, sporting goods and office equipment. Hylene® PPDI offers good... view more

2-functional aliphatic urethane acrylate... view more

GENOMER 4188/EHA by Rahn is aliphatic urethane acrylate. It has high tack, high elongation and excellent adhesion. GENOMER 4188/EHA complies with following regulations: REACH, TSCA, CEPA, IECSC... view more

GENOMER 4215 by Rahn is an aliphatic urethane acrylate. It has good flexibility, reactivity, pigment wetting and good chemical- and solvent-resistance. GENOMER 4215 complies with following... view more

GENOMER 4217 by Rahn is an aliphatic urethane acrylate. It has good flexibility, reactivity, pigment wetting and good chemical- and solvent-resistance. GENOMER 4217 complies with following... view more

GENOMER 4230 by Rahn is an aliphatic urethane acrylate. It has good flexibility, good adhesion, reactivity, pigment wetting and good chemical- and solvent-resistance. GENOMER 4230 complies with... view more

GENOMER 4267 by Rahn is an aliphatic urethane acrylate. It has good flexibility, reactivity, pigment wetting and good chemical- and solvent-resistance. GENOMER 4267 complies with following... view more

POLURENE LP 100 NPF by Sapici is toluene diisocyanate (TDI)-based polyurethane prepolymer containing blocked isocyanic groups with excellent rheology. It shows excellent improved flexibility for... view more

POLURENE LP 80 NPF is toluene diisocyanate (TDI)-based polyurethane prepolymer in DOA containing blocked and curable isocyanic groups by Sapici. It has very low viscosity and excellent rheology... view more

POLURENE LP 90 NPF by Sapici is toluene diisocyanate (TDI)-based polyurethane prepolymer in DOA containing blocked isocyanic groups. It shows improved flexibility for epoxy systems. It exhibits... view more

POLURENE LPI 604 by Sapici is solvent-free, MDI-based 1K PU binder. It shows good mechanical- & chemical resistance and fast curing. POLURENE LPI 604 is designed for use in industrial adhesives. It... view more

POLURENE MD 50 EA by Sapici is an aromatic polyisocyanate prepolymer. It is based on diphenylmethane diisocyanate (MDI). Applicable for adhesives and sealants. POLURENE MD 50 EA offers high... view more

SFA-335 by Shin-A T&C is a fluoro urethane acrylate. SFA-335 exhibits low refractive index... view more

SFA-347 by Shin-A T&C is an aliphatic urethane acrylate. It is used in low refractive index- and optical adhesives applications... view more

SFA-380 by SHIN-A T&C is a fluoro urethane acrylate. It exhibits low refractive index... view more

SFA-387 by Shin-A T&C is an aliphatic urethane acrylate. It is designed for low refractive index- and optical adhesives applications... view more

SFA-420 by Shin-A T&C is an aliphatic urethane acrylate with low refractive index. It is used in optical adhesives applications... view more

Aliphatic polyester polyol. It is a crystalline, primary hydroxyl, prepolymer grade which is designed to impart an excellent bonding profile. Stepanpol® PC-020-01 is of a great choice to the one... view more

Aliphatic polyester polyol. It is a crystalline, primary hydroxyl, prepolymer grade with good bonding profile. Stepanpol® PC-030-01 is of a great choice to the one component foam (OCF) insulating... view more

Aliphatic polyester polyol. It is an amorphous, primary hydroxyl, prepolymer grade with excellent bonding profile. Stepanpol® PC-030-02 is of a great choice to the one component foam (OCF)... view more

Aliphatic polyester polyol. It is a crystalline, primary hydroxyl, prepolymer grade with good bonding profile. Stepanpol® PC-030-03 is of a great choice to the one component foam (OCF) insulating... view more