The Universal Selection Source: Adhesives Ingredients

by SpecialChem
532 products match your search
Product Name
Supplier
Description
Pinova
Vinsol® by Pinova is a high melting, thermoplastic natural resin extracted from pinewood stumpa. It is available in pulverized or flaked forms. Vinsol® by Pinova is essentially insoluble in... view more
Applications
  • Adhesives
  • Sealants
High molecular weight peroxide cured dipolymer of tetrafluoroethylene and propylene. Used for compression molding of O-rings and shaft seals. Offers good compression set resistance and physical... view more
Applications
  • Sealants
Terpolymer of tetrafluoroethylene, propylene and vinylidene fluoride. Used in automotive powertrain seals such as radial shaft seals and head gaskets. Offers improved resistance to new types of... view more
Applications
  • Sealants>Pre-formed tape / Gasket
Terpolymer of tetrafluoroethylene, propylene and vinylidene fluoride. Used in automotive powertrain seals such as radial shaft seals and head gaskets. Offers improved resistance to new types of... view more
Applications
  • Sealants>Pre-formed tape / Gasket
Terpolymer of tetrafluoroethylene, propylene and vinylidene fluoride. Used in automotive powertrain seals such as radial shaft seals and head gaskets. Offers improved resistance to new types of... view more
Applications
  • Sealants>Pre-formed tape / Gasket
Medium viscosity, incorporated cure dipolymer of vinylidene fluoride and hexafluoropropylene. Used for bonded seal applications. Offers slow cure and very good hot tear strength... view more
Applications
  • Sealants
ACC Silicone
Low viscosity, non-corrosive, 2-component, addition cure, high performance silicone rubber system. Offers very good temperature resistance, fast degassing, room temperature cure or heat-accelerated... view more
Applications
  • Sealants
ACC Silicone
Two component silicone elastomer which cures to form a predominantly closed cell foam. Used in fire resistant seals and joints. Offers outstanding flame retardant characteristics... view more
Applications
  • Sealants>Foam
Modified, high performance, specialty naturel rubber prepared by graft polymerization of poly methyl methacrylate (PMMA) into a natural rubber latex. Used in solution adhesives especially... view more
Applications
  • Adhesives>Hot-melts>Pressure sensitive (HMPSA)
Modified, high performance, specialty naturel rubber prepared by graft polymerization of poly methyl methacrylate (PMMA) into a natural rubber latex. Used in solution adhesives especially... view more
Applications
  • Adhesives>Hot-melts>Pressure sensitive (HMPSA)
Akrochem
Modified, high performance, white natural rubber latex prepared by graft polymerization of poly methyl methacrylate (PMMA) onto natural rubber. Can be used as an adhesive promoter in combination... view more
Applications
  • Adhesives
Akrochem
Modified, high performance, white natural rubber latex prepared by graft polymerization of poly methyl methacrylate (PMMA) onto natural rubber. Can be used as an adhesive promoter in combination... view more
Applications
  • Adhesives
Akrochem
Modified, high performance, white natural rubber latex prepared by graft polymerization of poly methyl methacrylate (PMMA) onto natural rubber. Can be used as an adhesive promoter in combination... view more
Applications
  • Adhesives
Evatane® 1010 VN 3 by Arkema is a ethylene vinyl acetate copolymer. Used in stretch film, vacuum cleaner pipe cast and tubular film applications... view more
Applications
  • Adhesives>Hot-melts
  • Papers & Packagings>Flexible packaging: films / films & film / foil laminates
  • Industrial Assembly>Household appliance assembly
Evatane® 18-150 by Arkema is a copolymer of ethylene and vinyl acetate made by high-pressure radicular polymerization process. It is compatible with most tackifying resins and waxes. Provides... view more
Applications
  • Adhesives>Hot-melts
EVATANE® 18-500 by Arkema is a random copolymer of ethylene and vinyl acetate. It is made by high-pressure radicular polymerization process. EVATANE® 18-500 is compatible with most tackifying resins... view more
Applications
  • Adhesives>Hot-melts
Evatane® 20-20 by Arkema is a high quality ethylene vinyl acetate copolymer. Used in the manufacture of hot melt adhesives. Provides softness, flexibility and polarity. It is made by... view more
Applications
  • Adhesives>Hot-melts
EVATANE® 24-03 is a random copolymer of Ethylene and Vinyl Acetate made by high-pressure radicular polymerization process. Provides softness, flexibility and polarity. It can be used as an additive... view more
Applications
  • Adhesives
Styrenic thermoplastic elastomer. Used as adhesives and sealants component and as asphalt modifier. Provides high adhesive and cohesion strength. Offers heightened softening point, increased... view more
Applications
  • Adhesives>Hot-melts>Pressure sensitive (HMPSA)
  • Sealants
Bandar Imam Petrochemical Company(PGPICC)
Styrene butadiene rubber. Used in adhesives, sealants and gaskets... view more
Applications
  • Adhesives
  • Sealants>Pre-formed tape / Gasket
Bandar Imam Petrochemical Company(PGPICC)
Styrene butadiene rubber. Used in adhesives, sealants and gaskets... view more
Applications
  • Adhesives
  • Sealants>Pre-formed tape / Gasket
Solvent-free, modified, medium-viscous, branched ether-urethane-polymer with blocked, amine curable isocyanate groups. Used for elastifying of amine-curing epoxy systems, such as highly elastic... view more
Applications
  • Sealants
  • Adhesives
Solvent-free, medium-viscous, branched ether-urethane-polymer with blocked, amine curable isocyanate groups and modified with dioctyl adipate. Used for elastifying of amine-curing epoxy systems... view more
Applications
  • Adhesives
Ateva® 2604A by Celanese is a water-insoluble, antioxidant containing ethylene vinyl acetate (EVA) copolymer. Suitable for use in hot melt adhesives for packaging, labeling, case & carton closing... view more
Applications
  • Adhesives>Hot-melts
  • Bookbinding / graphic art
  • Labels / Signs / Decals
  • Papers & Packagings>Carton closure (packaging user)
Ateva® 2810A by Celanese is an antioxidant containing, water-insoluble, ethylene vinyl acetate (EVA) copolymer. Suitable for use in hot melt adhesives for packaging, labeling, case & carton closing... view more
Applications
  • Adhesives>Hot-melts
  • Papers & Packagings>Carton closure (packaging user)
  • Labels / Signs / Decals
  • Bookbinding / graphic art
Ateva® 2820A by Celanese is an antioxidant containing ethylene vinyl acetate (EVA) copolymer used for hot melt adhesive applications. It is insoluble in water and incompatible with strong oxidizing... view more
Applications
  • Adhesives>Hot-melts
  • Bookbinding / graphic art
  • Labels / Signs / Decals
  • Papers & Packagings>Carton closure (packaging user)
Ateva® 2825A by Celanese is an EVA (ethylene vinyl acetate) copolymer used for hot melt adhesive applications. It is water-insoluble and contains antioxidant. Applications include packaging... view more
Applications
  • Adhesives>Hot-melts
  • Bookbinding / graphic art
  • Labels / Signs / Decals
  • Papers & Packagings>Carton closure (packaging user)
Ateva® 2830A by Celanese is an ethylene vinyl acetate (EVA) copolymer. Contains an antioxidant to minimize viscosity changes of the blends during processing. It is insoluble in water and... view more
Applications
  • Adhesives>Hot-melts
  • Bookbinding / graphic art
  • Labels / Signs / Decals
  • Papers & Packagings>Carton closure (packaging user)
Isocyanate-terminated polyester prepolymer. Used in seals. Offers dynamic performance, low compression set and oil/solvent resistance... view more
Applications
  • Sealants
Crowley Chemical
Amorphous polypropylene. Possesses no reactivity, low odor, low molecular weight and high acceptance levels of inorganic fillers. Provides low cost, high softening point and very good insulation and... view more
Applications
  • Sealants
  • Adhesives>Hot-melts
Cytec (Solvay Group)
Water-soluble thermosetting melamine formaldehyde resin. Used for binder applications. Modifies other water-soluble or dispersible resins. Promotes water-resistance, hardness and punkproof... view more
Applications
  • Adhesives>Water-based
Cytec (Solvay Group)
Modified cycloaliphatic epoxide. Used in cationic curing formulations such as laminating adhesives. Provides enhanced flexibility, improved toughness, better chemical resistance, low color, higher... view more
Applications
  • Adhesives>Radiation Curing (UV/EB)
Cytec (Solvay Group)
Modified cycloaliphatic epoxide. Used in cationic curing formulations such as laminating adhesives. Provides enhanced flexibility, improved toughness, better chemical resistance, low color, higher... view more
Applications
  • Adhesives>Radiation Curing (UV/EB)
DENKI KAGAKU KOGYO KABUSHIKI KAISHA
Denka Poval B-05 is a polyvinyl alcohol (PVOH) grade. It is a water-soluble, partially hydrolysed product. It is made from vinyl acetate monomer through polymerization and saponification process... view more
Applications
  • Adhesives
DENKI KAGAKU KOGYO KABUSHIKI KAISHA
Denka Poval B-17 is a polyvinyl alcohol (PVOH) grade. It is a water-soluble, partially hydrolysed product. It is made from vinyl acetate monomer through polymerization and saponification process... view more
Applications
  • Adhesives
  • Papers & Packagings
DENKI KAGAKU KOGYO KABUSHIKI KAISHA
Denka Poval B-20 is a polyvinyl alcohol (PVOH) grade. It is a water-soluble, partially hydrolysed product. It is made from vinyl acetate monomer through polymerization and saponification process... view more
Applications
  • Adhesives
  • Papers & Packagings
DENKI KAGAKU KOGYO KABUSHIKI KAISHA
Denka Poval D-100 is a polyvinyl alcohol (PVOH) grade. It can provide superior control in viscosity and bond strength. It is a hydrophobically modified water-soluble polymer made from vinyl acetate... view more
Applications
  • Adhesives
DENKI KAGAKU KOGYO KABUSHIKI KAISHA
Denka Poval H-17 is a polyvinyl alcohol (PVOH) grade. It is a water-soluble, medium hydrolysed product made from vinyl acetate monomer through polymerization and saponification process. Used in a... view more
Applications
  • Adhesives
  • Papers & Packagings
DIC Corporation
EPICLON® 850-CRP by DIC Corporation is a distilled bisphenol A type (BPA) epoxy resin of high purity. Available in Asian countries. Applications of EPICLON® 850-CRP by DIC Corporation include... view more
Applications
  • Adhesives
  • Buildings & constructions>Concrete
DIC Corporation
Bisphenol F type epoxy resin. It is a resin of high purity. Exhibits excellent workability and moldability due to low viscosity. Applications include concrete adhesives... view more
Applications
  • Adhesives
  • Buildings & constructions>Concrete
DIC Corporation
Bisphenol F type epoxy resin. It is a resin of high purity. Exhibits excellent workability and moldability due to low viscosity. Applications include concrete adhesives... view more
Applications
  • Adhesives
  • Buildings & constructions>Concrete
DowDuPont (Dupont)
Hydro/biodegradable, highly versatile polyethylene terephthalate (PET)polyester. Used in hot-melt adhesives. Can be degradated through hydrolysis. Possesses softness, pliability, low noise, a good... view more
Applications
  • Adhesives>Hot-melts
DowDuPont (Dupont)
Ethylene-vinyl acetate copolymer resin. Contains butylated hydroxytoluene and an anti-blocking additive. Used as a resin base for hot melt, pressure sensitive, and solvent-applied adhesives and for... view more
Applications
  • Adhesives>Solvent based
  • Adhesives>Hot-melts>Pressure sensitive (HMPSA)
  • Sealants
DowDuPont (Dupont)
Ethylene-vinyl acetate copolymer resin. Contains butylated hydroxytoluene. Used as a resin base for hot melt, pressure sensitive, and solvent-applied adhesives and for sealants. Offers very good... view more
Applications
  • Adhesives>Solvent based
  • Adhesives>Hot-melts>Pressure sensitive (HMPSA)
  • Sealants
DowDuPont (Dupont)
Ethylene-vinyl acetate copolymer resin. Contains butylated hydroxytoluene. Used as a resin base for hot melt, pressure sensitive, and solvent-applied adhesives and for sealants. Offers very good... view more
Applications
  • Adhesives>Solvent based
  • Adhesives>Hot-melts>Pressure sensitive (HMPSA)
  • Sealants
DowDuPont (Dupont)
High vinyl acetate, low melt index, relatively polar, ethylene-vinyl acetate copolymer resin. Used as a resin base for hot melt, pressure sensitive, and solvent-applied adhesives and for sealants... view more
Applications
  • Adhesives>Solvent based
  • Adhesives>Hot-melts>Pressure sensitive (HMPSA)
  • Sealants
Calprene® H6110 by Dynasol is a 70/30 ethylene-butylene/styrene thermoplastic triblock copolymer, polymerized in solution. Suitable for PSA adhesive sealant formulations, oil gels, plastic- and... view more
Applications
  • Adhesives
  • Sealants
  • Tapes
  • Labels / Signs / Decals
Low molecular weight, triblock, linear ethylene-butylene-styrene thermoplastic copolymer, polymerized in solution. Has very good thermal as well as environmental stability, UV, ozone and temperature... view more
Applications
  • Adhesives
  • Sealants
  • Labels / Signs / Decals
  • Tapes
Solprene® 303 by Dynasol is a linear random-block styrene-butadiene copolymer with 46% styrene content, 11% present as a polystyrene block. Used in pressure-sensitive adhesives. Provides hardness... view more
Applications
  • Adhesives>Hot-melts>Pressure sensitive (HMPSA)
Linear thermoplastic multiblock copolymer of styrene and butadiene with high vinyl content. Used in adhesives. Offers adhesion to cloth, paper, films and sheet metal for PSA. Applications: pressure... view more
Applications
  • Adhesives>Hot-melts>Pressure sensitive (HMPSA)
Eastman Chemical Company
Aerafin™ is a polyolefinic polymer. Exhibits excellent thermal stability, low odor, minimal changes in color, stable rheological changes and less charring/plugging. Provides good adhesion with... view more
Applications
  • Adhesives>Hot-melts
  • Buildings & constructions
Cellulose acetate. It is supplied in the form of fine, dry, free-flowing powder which is free from coarse particles and excessive fines. Has higher viscosity and molecular weight. Its relatively... view more
Applications
  • Adhesives
  • Sealants
  • Tapes
Cellulose acetate. This low viscosity solution grade has no odor and supplied in the form of fine, dry, free-flowing powder. It is prior sanctioned for use in film in food-contact applications and... view more
Applications
  • Adhesives
  • Sealants
  • Tapes
  • Papers & Packagings>Flexible packaging: films / films & film / foil laminates
Cellulose acetate butyrate. It is one of the most abundant natural renewable resources. Has medium butyryl content and low viscosity. It is soluble in a wide range of solvents and compatible with... view more
Applications
  • Adhesives
  • Transportation (excl. Automotive)>Truck
  • Automotive>Exterior vehicle (OEM)
It is a cellulose acetate butyrate. Has lower viscosity and slight, characteristic odor. It is a slight modification of the standard CAB-381-2 cellulose acetate butyrate and was designed primarily... view more
Applications
  • Adhesives
  • Automotive>Exterior vehicle (OEM)
  • Papers & Packagings>Heat seals
  • Transportation (excl. Automotive)>Truck
Report Missing Product/Supplier Report Error in Datasheet Suggest Improvement
Back to Top