OK
The Universal Selection Source:
Adhesives Ingredients
264 products match your search
Product Name
Supplier
Description
Sasolwax® H1 by Sasol is a Fischer-Tropsch standard fully hydrogenated wax. It is available as white flakes or pastilles. It is composed of hydrocarbon chains that are predominantly linear. It has... view more
Applications
  • Adhesives>Hot-melts
Nondiscoloring and nonstaining tris(mono-nonylphenyl) phosphite. Acts as an antioxidant. Prevents resinification of the polymer during manufacturing and storage. Offers protection against heat and... view more
Applications
  • Adhesives>Hot-melts>Pressure sensitive (HMPSA)
  • Sealants>Pre-formed tape / Gasket
  • Polymers>Synthetic Rubbers
Antioxidant 12 by Akrochem is a sterically hindered polymeric phenol-type non-staining, non-discoloring antioxidant. Used as a stabilizer and antioxidant in a variety of polymers, including natural... view more
Applications
  • Adhesives>Water-based
  • Adhesives>Hot-melts
  • Polymers>Synthetic Rubbers>Chlorinated Rubbers / Chloroprenes (CR)
Modified, high performance, specialty naturel rubber prepared by graft polymerization of poly methyl methacrylate (PMMA) into a natural rubber latex. Used in solution adhesives especially... view more
Applications
  • Adhesives>Solvent based
  • Adhesives>Hot-melts>Pressure sensitive (HMPSA)
Modified, high performance, specialty naturel rubber prepared by graft polymerization of poly methyl methacrylate (PMMA) into a natural rubber latex. Used in solution adhesives especially... view more
Applications
  • Adhesives>Solvent based
  • Adhesives>Hot-melts>Pressure sensitive (HMPSA)
Arakawa Chemical
Rosin ester. Used as a tackifier in hot melt and pressure sensitive adhesives. Offers good compatibility with natural and synthetic elastomers... view more
Applications
  • Adhesives>Hot-melts>Pressure sensitive (HMPSA)
Arakawa Chemical
Hydrogenated rosin ester. Used as a tackifier in hot melt and pressure sensitive adhesives. Offers good compatibility with natural and synthetic elastomers... view more
Applications
  • Adhesives>Hot-melts>Pressure sensitive (HMPSA)
Arakawa Chemical
Colorless rosin . Used as a tackifier in high grade hot-melt adhesives. Offers compatibility with many kinds of polymers, superior thermal stability and weatherability. Possesses low metal... view more
Applications
  • Adhesives>Hot-melts
Arakawa Chemical
Highly stabilized rosin ester. Used as a tackifier in pressure sensitive and hot melt adhesives. Offers very good heat resistance and low temperature properties... view more
Applications
  • Adhesives>Hot-melts>Pressure sensitive (HMPSA)
Arakawa Chemical
Highly stabilized rosin ester. Used as a tackifier in pressure sensitive and hot melt adhesives. Offers good oxidation and weather resistance and low temperature properties... view more
Applications
  • Adhesives>Hot-melts>Pressure sensitive (HMPSA)
Evatane® 1010 VN 3 by Arkema is a ethylene vinyl acetate copolymer. Used in stretch film, vacuum cleaner pipe cast and tubular film applications... view more
Applications
  • Adhesives>Hot-melts
  • Papers & Packagings>Flexible packaging: films / films & film / foil laminates
  • Industrial Assembly>Household appliance assembly
Evatane® 18-150 by Arkema is a copolymer of ethylene and vinyl acetate made by high-pressure radicular polymerization process. It is compatible with most tackifying resins and waxes. Provides... view more
Applications
  • Adhesives>Hot-melts
EVATANE® 18-500 by Arkema is a random copolymer of ethylene and vinyl acetate. It is made by high-pressure radicular polymerization process. EVATANE® 18-500 is compatible with most tackifying resins... view more
Applications
  • Adhesives>Hot-melts
Evatane® 20-20 by Arkema is a high quality ethylene vinyl acetate copolymer. Used in the manufacture of hot melt adhesives. Provides softness, flexibility and polarity. It is made by... view more
Applications
  • Adhesives>Hot-melts
EVATANE® 28-03 by Arkema is ethylene vinyl acetate copolymer. Used in the manufacture of hot melt adhesives. Provides softness, flexibility and polarity. It is made by high-pressure radicular... view more
Applications
  • Adhesives>Hot-melts
Styrenic thermoplastic elastomer. Used as adhesives and sealants component and as asphalt modifier. Provides high adhesive and cohesion strength. Offers heightened softening point, increased... view more
Applications
  • Adhesives>Hot-melts>Pressure sensitive (HMPSA)
  • Sealants
Trisarylphosphite processing stabiliser. Used in hotmelt and solvent based adhesives and in sealants. Possesses very effective, low-volatile and hydrolysis resistant antioxidant properties. Offers... view more
Applications
  • Adhesives>Hot-melts
  • Adhesives>Solvent based
  • Sealants
  • Polymers>Styrene Copolymers (SBR …)
  • ...
High molecular weight oligomeric hindered amine. Used in hotmelt, reactive, solvent based and radiation curing adhesives and sealants. Acts as light stabilizer and antioxidant. Offers long- term... view more
Applications
  • Adhesives>Solvent based
  • Adhesives>Radiation Curing (UV/EB)
  • Adhesives>Hot-melts
  • Sealants
  • ...
Hard synthetic wax comprised of linear, fully saturated ethylene homopolymers. Exhibits low melt viscosity, excellent heat stability and resistance to chemical attack. Offers viscosity modification... view more
Applications
  • Adhesives>Hot-melts
  • Polymers>Ethylene Co-terpolymers - Solids (EVA, EMA)
Polywax™ 1000 polyethylene by Baker Hughes is a fully saturated homopolymer of ethylene that exhibits a high degree of linearity and crystallinity. Acts as a rheology modifier for hot melt... view more
Applications
  • Adhesives>Hot-melts
  • Polymers>Ethylene Co-terpolymers - Solids (EVA, EMA)
Fully saturated homopolymer of ethylene that exhibits a high degree of linearity and crystallinity. Acts as a rheology modifier for hot melt adhesives. Exhibits sharp melt point, fast... view more
Applications
  • Adhesives>Hot-melts
  • Polymers>Ethylene Co-terpolymers - Solids (EVA, EMA)
Polywax™ 3000 polyethylene by Baker Hughes is a fully saturated homopolymer of ethylene that exhibits a high degree of linearity and crystallinity. Acts as a rheology modifier for hot melt... view more
Applications
  • Adhesives>Hot-melts
  • Polymers>Ethylene Co-terpolymers - Solids (EVA, EMA)
Bioray Chem
2,6-di-tert-butyl-4-(4,6-bis(octylthio)-1,3,5-triazin-2-ylamino)phenol. Acts as a high molecular weight, non-staining, multifunctional phenolic antioxidant. Used in hot melt and solven-based... view more
Applications
  • Adhesives>Hot-melts
  • Adhesives>Solvent based
  • Polymers>Synthetic Rubbers
  • Polymers>Polyolefins
  • ...
Ateva® 2604A by Celanese is a water-insoluble, antioxidant containing ethylene vinyl acetate (EVA) copolymer. Suitable for use in hot melt adhesives for packaging, labeling, case & carton closing... view more
Applications
  • Adhesives>Hot-melts
  • Bookbinding / graphic art
  • Labels / Signs / Decals
  • Papers & Packagings>Carton closure (packaging user)
Ateva® 2810A by Celanese is an antioxidant containing, water-insoluble, ethylene vinyl acetate (EVA) copolymer. Suitable for use in hot melt adhesives for packaging, labeling, case & carton closing... view more
Applications
  • Adhesives>Hot-melts
  • Papers & Packagings>Carton closure (packaging user)
  • Labels / Signs / Decals
  • Bookbinding / graphic art
Ateva® 2820A by Celanese is an antioxidant containing ethylene vinyl acetate (EVA) copolymer used for hot melt adhesive applications. It is insoluble in water and incompatible with strong oxidizing... view more
Applications
  • Adhesives>Hot-melts
  • Bookbinding / graphic art
  • Labels / Signs / Decals
  • Papers & Packagings>Carton closure (packaging user)
Ateva® 2825A by Celanese is an EVA (ethylene vinyl acetate) copolymer used for hot melt adhesive applications. It is water-insoluble and contains antioxidant. Applications include packaging... view more
Applications
  • Adhesives>Hot-melts
  • Bookbinding / graphic art
  • Labels / Signs / Decals
  • Papers & Packagings>Carton closure (packaging user)
Ateva® 2830A by Celanese is an ethylene vinyl acetate (EVA) copolymer. Contains an antioxidant to minimize viscosity changes of the blends during processing. It is insoluble in water and... view more
Applications
  • Adhesives>Hot-melts
  • Bookbinding / graphic art
  • Labels / Signs / Decals
  • Papers & Packagings>Carton closure (packaging user)
Crodamide™ ER by Croda is a refined erucamide. Acts as a process aid. It is available in powder, microbeads, beads or pastilles form. Available in North America and Europe. Avoids sticking during... view more
Applications
  • Adhesives>Hot-melts
  • Sealants
Crowley Chemical
Amorphous polypropylene. Possesses no reactivity, low odor, low molecular weight and high acceptance levels of inorganic fillers. Provides low cost, high softening point and very good insulation and... view more
Applications
  • Sealants
  • Adhesives>Hot-melts
Cytec (Solvay Group)
Hardener for irregular wood substrates... view more
Applications
  • Adhesives>Hot-melts
Cytec (Solvay Group)
Dry catalyst. Designed for use with melamine-urea formaldehyde resin in fast cycle, high frequency applications. Used as hardener in heat-cured adhesives. Applications : gluing of truck and... view more
Applications
  • Adhesives>Hot-melts
Cytec (Solvay Group)
Dry catalyst. Designed for use with melamine-urea formaldehyde resin in fast cycle, high frequency and hot press bonding applications. Used as hardener in heat-cured adhesives. Applications :... view more
Applications
  • Adhesives>Hot-melts
Daelim Industrial
Colorless, hydrophobic, non-toxic, chemically stable and high purity polybutene. Used in adhesives, sealants and caulks. Possesses no additive, very low chlorine/sulfur content, very low acid value... view more
Applications
  • Sealants
  • Adhesives>Hot-melts>Pressure sensitive (HMPSA)
Daelim Industrial
Colorless, hydrophobic, non-toxic, chemically stable and high purity polybutene. Used in adhesives, sealants and caulks. Possesses no additive, very low chlorine/sulfur content, very low acid value... view more
Applications
  • Sealants
  • Adhesives>Hot-melts>Pressure sensitive (HMPSA)
Daelim Industrial
Colorless, hydrophobic, non-toxic, chemically stable and high purity polybutene. Used in adhesives, sealants and caulks. Possesses no additive, very low chlorine/sulfur content, very low acid value... view more
Applications
  • Sealants
  • Adhesives>Hot-melts>Pressure sensitive (HMPSA)
Daelim Industrial
Colorless, hydrophobic, non-toxic, chemically stable and high purity polybutene. Used in adhesives, sealants and caulks. Possesses no additive, very low chlorine/sulfur content, very low acid value... view more
Applications
  • Sealants
  • Adhesives>Hot-melts>Pressure sensitive (HMPSA)
Daelim Industrial
Colorless, hydrophobic, non-toxic, chemically stable and high purity polybutene. Used in adhesives, sealants and caulks. Possesses no additive, very low chlorine/sulfur content, very low acid value... view more
Applications
  • Sealants
  • Adhesives>Hot-melts>Pressure sensitive (HMPSA)
DowDuPont (Dupont)
Hydro/biodegradable, highly versatile polyethylene terephthalate (PET)polyester. Used in hot-melt adhesives. Can be degradated through hydrolysis. Possesses softness, pliability, low noise, a good... view more
Applications
  • Adhesives>Hot-melts
DowDuPont (Dupont)
Ethylene-vinyl acetate copolymer resin. Contains butylated hydroxytoluene and an anti-blocking additive. Used as a resin base for hot melt, pressure sensitive, and solvent-applied adhesives and for... view more
Applications
  • Adhesives>Solvent based
  • Adhesives>Hot-melts>Pressure sensitive (HMPSA)
  • Sealants
DowDuPont (Dupont)
Ethylene-vinyl acetate copolymer resin. Contains butylated hydroxytoluene. Used as a resin base for hot melt, pressure sensitive, and solvent-applied adhesives and for sealants. Offers very good... view more
Applications
  • Adhesives>Hot-melts>Pressure sensitive (HMPSA)
  • Adhesives>Solvent based
  • Sealants
DowDuPont (Dupont)
Ethylene-vinyl acetate copolymer resin. Contains butylated hydroxytoluene. Used as a resin base for hot melt, pressure sensitive, and solvent-applied adhesives and for sealants. Offers very good... view more
Applications
  • Adhesives>Hot-melts>Pressure sensitive (HMPSA)
  • Adhesives>Solvent based
  • Sealants
DowDuPont (Dupont)
High vinyl acetate, low melt index, relatively polar, ethylene-vinyl acetate copolymer resin. Used as a resin base for hot melt, pressure sensitive, and solvent-applied adhesives and for sealants... view more
Applications
  • Adhesives>Hot-melts>Pressure sensitive (HMPSA)
  • Adhesives>Solvent based
  • Sealants
Solprene® 303 by Dynasol is a linear random-block styrene-butadiene copolymer with 46% styrene content, 11% present as a polystyrene block. Used in pressure-sensitive adhesives. Provides hardness... view more
Applications
  • Adhesives>Hot-melts>Pressure sensitive (HMPSA)
Linear thermoplastic multiblock copolymer of styrene and butadiene with high vinyl content. Used in adhesives. Offers adhesion to cloth, paper, films and sheet metal for PSA. Applications: pressure... view more
Applications
  • Adhesives>Hot-melts>Pressure sensitive (HMPSA)
Eastman Chemical Company
Aerafin™ is a polyolefinic polymer. Exhibits excellent thermal stability, low odor, minimal changes in color, stable rheological changes and less charring/plugging. Provides good adhesion with... view more
Applications
  • Adhesives>Hot-melts
  • Buildings & constructions
Eastman Chemical Company
Eastoflex™ E1003 by Eastman Chemical Company is a saturated, low molecular weight, propylene-based olefin. Acts as a tackifier. Is inherently soft, tacky and flexible. Used in hot melt adhesives... view more
Applications
  • Adhesives>Solvent based>Pressure sensitive (PSA)
  • Adhesives>Hot-melts>Pressure sensitive (HMPSA)
Eastman Chemical Company
Eastoflex™ E1060 by Eastman Chemical Company is an amorphous polyolefin (copolymer of propylene and ethylene) grade. Is inherently soft, tacky and flexible. Used in automotive, building and... view more
Applications
  • Adhesives>Hot-melts>Pressure sensitive (HMPSA)
  • Adhesives>Solvent based>Pressure sensitive (PSA)
  • Buildings & constructions
  • Footwear & leather
  • ...
Eastman Chemical Company
Eastoflex™ E1200 by Eastman Chemical Company is an amorphous polyolefin (copolymer of propylene and ethylene) grade. Possesses inherent softness, tackiness and flexibility. Exhibits good water and... view more
Applications
  • Adhesives>Solvent based>Pressure sensitive (PSA)
  • Adhesives>Hot-melts>Pressure sensitive (HMPSA)
  • Buildings & constructions
  • Footwear & leather
  • ...
Eastman Chemical Company
Eastoflex™ P1010 by Eastman Chemical Company is an amorphous polyolefin (APO). Acts as a tackifier. Provides softness, low color, odor, excellent thermal and UV stability. Exhibits flexibility... view more
Applications
  • Adhesives>Solvent based>Pressure sensitive (PSA)
  • Adhesives>Hot-melts>Pressure sensitive (HMPSA)
  • Sealants
  • Buildings & constructions>General caulking & sealing
Finjetchemical Industries
Pentaerythritol ester of rosin. Possesses stability, low volatility, good polymer compatibility (EVA, EEA, SIS, SBS, SBR, rubber, neoprene, acrylic, LMW polyethylene, amorphous polypropylene) and... view more
Applications
  • Adhesives>Hot-melts>Pressure sensitive (HMPSA)
  • Sealants
  • Polymers>Synthetic Rubbers
  • Polymers>Ethylene Co-terpolymers - Solids (EVA, EMA)
Finjetchemical Industries
High softening point, pentaerythritol ester of rosin. Possesses good polymer compatibility (EVA, EEA, SIS, SBS, SBR, rubber, neoprene, acrylic, LMW polyethylene, amorphous polypropylene) and... view more
Applications
  • Adhesives>Hot-melts>Pressure sensitive (HMPSA)
  • Sealants
  • Polymers>Synthetic Rubbers
  • Polymers>Acrylics & Acrylic Copolymers
  • ...
Finjetchemical Industries
Light-colored glycerol ester of rosin. Possesses low odor and good polymer compatibility (EVA, EEA, SIS, SBS, SBR, rubber, neoprene, acrylic, LMW polyethylene, amorphous polypropylene) and... view more
Applications
  • Adhesives>Hot-melts>Pressure sensitive (HMPSA)
  • Sealants
  • Polymers>Synthetic Rubbers
  • Polymers>Acrylics & Acrylic Copolymers
  • ...
Finjetchemical Industries
Light-colored glycerin ester of rosin. Possesses low odor and good polymer compatibility (EVA, EEA, SIS, SBS, SBR, rubber, neoprene, acrylic, LMW polyethylene, amorphous polypropylene) and... view more
Applications
  • Adhesives>Hot-melts>Pressure sensitive (HMPSA)
  • Sealants
  • Polymers>Synthetic Rubbers
  • Polymers>Acrylics & Acrylic Copolymers
  • ...
Finjetchemical Industries
Glycerol ester of rosin. Possesses very good polymer compatibility (EVA, EEA, SIS, SBS, SBR, rubber, neoprene, acrylic, LMW polyethylene, amorphous polypropylene) and compatibility with phthalate... view more
Applications
  • Adhesives>Hot-melts
  • Sealants
  • Polymers>Acrylics & Acrylic Copolymers
  • Polymers>Synthetic Rubbers
  • ...
Rosin modified phenolic resin. Acts as a tackifier. Used as the low cost enhancer in bonding capability for pressure-sensitive adhesive, hot-melt adhesive, and other bonding agents... view more
Applications
  • Adhesives>Hot-melts>Pressure sensitive (HMPSA)
Styrenic thermoplastic elastomer that resulted from both synthetic rubber and synthetic resin technologies. Used as a base polymer for hot melt and solvent-based adhesives. Offers very good... view more
Applications
  • Adhesives>Hot-melts
  • Adhesives>Solvent based
Styrenic thermoplastic elastomer that resulted from both synthetic rubber and synthetic resin technologies. Used as a base polymer for hot melt and solvent-based adhesives. Offers very good... view more
Applications
  • Adhesives>Hot-melts
  • Adhesives>Solvent based
Styrenic thermoplastic elastomer that resulted from both synthetic rubber and synthetic resin technologies. Used as a base polymer for hot melt and solvent-based adhesives. Offers very good... view more
Applications
  • Adhesives>Hot-melts
  • Adhesives>Solvent based
Styrenic thermoplastic elastomer that resulted from both synthetic rubber and synthetic resin technologies. Used as a base polymer for hot melt and solvent-based adhesives. Offers very good... view more
Applications
  • Adhesives>Hot-melts
  • Adhesives>Solvent based
Clear linear SIS copolymer. Can be used in formulating adhesives and sealants. Preferred for use in pressure sensitive adhesives. Permits to modify a wide range of adhesive performance properties... view more
Applications
  • Adhesives>Solvent based>Contact adhesives
  • Adhesives>Hot-melts>Pressure sensitive (HMPSA)
  • Sealants
Oil-extended linear SBS copolymer. Contains a non-staining naphthenic oil. Can be used in formulating adhesives and sealants. Preferred for use in contact adhesives. Permits to modify a wide range... view more
Applications
  • Adhesives>Solvent based>Contact adhesives
  • Adhesives>Hot-melts>Pressure sensitive (HMPSA)
  • Sealants
Oil-extended linear SBS copolymer. Contains a non-staining paraffinic oil. Can be used in formulating adhesives and sealants. Preferred for use in contact adhesives. Permits to modify a wide range... view more
Applications
  • Adhesives>Solvent based>Contact adhesives
  • Adhesives>Hot-melts>Pressure sensitive (HMPSA)
  • Sealants
Linear SBS copolymer. Can be used in formulating adhesives and sealants. Preferred for use in contact adhesives. Permits to modify a wide range of adhesive performance properties such as tack... view more
Applications
  • Adhesives>Solvent based>Contact adhesives
  • Adhesives>Hot-melts>Pressure sensitive (HMPSA)
  • Sealants
Kraton™ G1650 by KRATON is a styrene-ethylene-butylene-styrene (SEBS) linear polymer with a tri-block structure. Acts as a thickening agent. It solidifies mineral oils to provide strength, enhanced... view more
Applications
  • Adhesives>Solvent based
  • Adhesives>Hot-melts
  • Sealants
Atomized N,N' ethylene bis-stearamide wax. Used in hot melt adhesives. Can be used as a lubricant and binder for cold compaction of powdered metal parts... view more
Applications
  • Adhesives>Hot-melts
Neville Chemical
Aliphatic hydrocarbon resin used in hot-melt adhesives, solvent-based, pressure sensitive adhesives, and as tackifying resins with exceptional heat stability. Offers good heat and color stability... view more
Applications
  • Adhesives>Hot-melts>Pressure sensitive (HMPSA)
  • Adhesives>Solvent based
  • Sealants
  • Polymers>Synthetic Rubbers
  • ...
Neville Chemical
High molecular weight aliphatic hydrocarbon resin used in hot-melt and pressure sensitive applications where higher viscosity and increased adhesive strength are important. Offers good heat and... view more
Applications
  • Adhesives>Hot-melts>Pressure sensitive (HMPSA)
  • Sealants
Neville Chemical
Resin used in formulating hot-melt pressure-sensitive adhesives based on styrene isoprene block copolymers and in hot-melt systems based on high vinyl acetate content EVA resins... view more
Applications
  • Adhesives>Hot-melts>Pressure sensitive (HMPSA)
  • Sealants
  • Polymers>Ethylene Co-terpolymers - Solids (EVA, EMA)
  • Polymers>Styrene Block Copolymers, SBC (SBS, SEBS, SEPS, SIS)
  • ...
Neville Chemical
Low molecular weight hydrocarbon resin. Gives high tack, low solution viscosities and low molten viscosities. Used in hot-melt adhesives... view more
Applications
  • Adhesives>Hot-melts>Pressure sensitive (HMPSA)
  • Sealants
  • Polymers>Synthetic Rubbers
  • Polymers>Polyolefins
Polyterpene resin. Acts as a tackifier. It is a pale, neutral, low molecular weight, thermoplastic and highly stable. It enables light color, resistance to aging, high thermal stability and... view more
Applications
  • Adhesives>Hot-melts>Pressure sensitive (HMPSA)
  • Polymers>Synthetic Rubbers
  • Polymers>Natural rubbers (NR)
Potter Industries (PQ Corporation)
Silver coated conductive glass fiber. Available in 1/32" screen size. Application: conductive adhesives, caulks, sealants, putties and gasketing materials, electronic packaging applications... view more
Applications
  • Adhesives>Hot-melts
  • Sealants>Pre-formed tape / Gasket
Potter Industries (PQ Corporation)
Silver-coated glass fiber. Possesses high conductivity and shielding effectiveness of silver with the lightweight properties of glass. Provides good conductivity at relatively low loading... view more
Applications
  • Adhesives>Hot-melts
  • Sealants>Pre-formed tape / Gasket
Potter Industries (PQ Corporation)
Silver-coated glass fiber. Possesses high conductivity and shielding effectiveness of silver with the lightweight properties of glass. Provides good conductivity at relatively low loading... view more
Applications
  • Adhesives>Hot-melts
  • Sealants>Pre-formed tape / Gasket
Rosin ester resin sterified with pentaerytritol. Used as tackifier in hot melt adhesives. Provides good color and stability, stability in emulsions and tack... view more
Applications
  • Adhesives>Hot-melts
RESAFEN 14-013 (old name SUPER RESANITE 14-013) by Reichhold is a non-reactive, terpene phenolic resin. Acts as a tackifier in hot melt adhesives. Provides bodying and drying with soft oils, package... view more
Applications
  • Adhesives>Hot-melts>Non pressure sensitive (HMA)
Pentaerythritol ester of gum rosin. Acts as a tackifier. Is esterified by gum rosin and glycerol or pertaerythrite. Used in hot melt and pressure sensitive adhesives... view more
Applications
  • Adhesives>Hot-melts>Pressure sensitive (HMPSA)
Pentaerythritol ester of gum rosin. Acts as a tackifier. Is esterified by gum rosin and glycerol or pertaerythrite. Used in hot melt and pressure sensitive adhesives... view more
Applications
  • Adhesives>Hot-melts>Pressure sensitive (HMPSA)
Pentaerythritol ester of gum rosin. Acts as a tackifier. Is esterified by gum rosin and glycerol or pertaerythrite. Used in hot melt and pressure sensitive adhesives... view more
Applications
  • Adhesives>Hot-melts>Pressure sensitive (HMPSA)
Glycerol ester of gum rosin. Acts as a tackifier. Is made from refined gum rosin through esterification with glycerol or pentaerythritol. Used in hot melt and pressure sensitive adhesives... view more
Applications
  • Adhesives>Hot-melts>Pressure sensitive (HMPSA)
Glycerol ester of gum rosin. Acts as a tackifier. Is made from refined gum rosin through esterification with glycerol or pentaerythritol. Used in hot melt and pressure sensitive adhesives... view more
Applications
  • Adhesives>Hot-melts>Pressure sensitive (HMPSA)
Rit-Chem
Alpha pinene polyterpene resin. Possesses high viscosity. Used as a tackifier in hot melt and solvent-based pressure sensitive adhesive applications... view more
Applications
  • Adhesives>Hot-melts>Pressure sensitive (HMPSA)
  • Adhesives>Solvent based>Pressure sensitive (PSA)
Rit-Chem
Alpha and beta pinene polyterpene resin. Used in hot melt and solvent-based pressure sensitive adhesive applications... view more
Applications
  • Adhesives>Hot-melts>Pressure sensitive (HMPSA)
  • Adhesives>Solvent based>Pressure sensitive (PSA)
Rit-Chem
Alpha and beta pinene polyterpene resin. Used in hot melt and solvent-based pressure sensitive adhesive applications... view more
Applications
  • Adhesives>Solvent based>Pressure sensitive (PSA)
  • Adhesives>Hot-melts>Pressure sensitive (HMPSA)
Rit-Chem
Alpha and beta pinene polyterpene resin. Used in hot melt and solvent-based pressure sensitive adhesive applications... view more
Applications
  • Adhesives>Solvent based>Pressure sensitive (PSA)
  • Adhesives>Hot-melts>Pressure sensitive (HMPSA)
Rit-Chem
Alpha and beta pinene polyterpene resin. Used in hot melt and solvent-based pressure sensitive adhesive applications... view more
Applications
  • Adhesives>Solvent based>Pressure sensitive (PSA)
  • Adhesives>Hot-melts>Pressure sensitive (HMPSA)
Shell Chemicals
High quality naphthenic process oil. Used in hot-melt adhesives for packaging and construction, and in adhesives for shoe and textile manufacturing. Offers high stability... view more
Applications
  • Adhesives>Hot-melts
  • Polymers>Styrene Block Copolymers, SBC (SBS, SEBS, SEPS, SIS)
Shell Chemicals
High quality naphthenic process oil. Used in hot-melt adhesives for packaging and construction, and in adhesives for shoe and textile manufacturing. Offers high stability... view more
Applications
  • Adhesives>Hot-melts
  • Polymers>Styrene Block Copolymers, SBC (SBS, SEBS, SEPS, SIS)
Shell Chemicals
High quality naphthenic process oil. Used in hot-melt adhesives for packaging and construction, and in adhesives for shoe and textile manufacturing. Offers high stability... view more
Applications
  • Adhesives>Hot-melts
  • Polymers>Styrene Block Copolymers, SBC (SBS, SEBS, SEPS, SIS)
Shell Chemicals
High quality naphthenic process oil. Used in hot-melt adhesives for packaging and construction, and in adhesives for shoe and textile manufacturing. Offers high stability... view more
Applications
  • Adhesives>Hot-melts
  • Polymers>Styrene Block Copolymers, SBC (SBS, SEBS, SEPS, SIS)
Shell Chemicals
High quality naphthenic process oil. Used in hot-melt adhesives for packaging and construction, and in adhesives for shoe and textile manufacturing. Offers high stability... view more
Applications
  • Adhesives>Hot-melts
  • Polymers>Styrene Block Copolymers, SBC (SBS, SEBS, SEPS, SIS)
1,2-Bis(3,5-di-tert-butyl-4-hydroxyhydrocinnamoly) hydrazine. Acts as a phenolic antioxidant. It is extraction resistant and is compatible with PE, PP, cross linked PE, EPDM, elastomers, nylon, PU... view more
Applications
  • Adhesives>Hot-melts
  • Polymers>Polyolefins>Polyethylene & Derivatives
  • Polymers>Polyurethanes>Thermoplastics (TPUs)
  • Polymers>Styrene Copolymers (SBR …)
  • ...
Diethylene glycol-phthalic anhydride-based polyester polyol. Used in formulating urethane adhesives and sealants. Possesses low Tg, amorphous (or non crystalline) morphology and good wetting... view more
Applications
  • Sealants>Foam
  • Adhesives>Hot-melts
  • Adhesives>Solvent based
  • Adhesives>Radiation Curing (UV/EB)
  • ...
Diethylene glycol-phthalic anhydride-based polyester polyol. Used in formulating urethane adhesives and sealants. Possesses low Tg, amorphous (or non crystalline) morphology and good wetting... view more
Applications
  • Sealants>Foam
  • Adhesives>Hot-melts
  • Adhesives>Solvent based
  • Adhesives>Radiation Curing (UV/EB)
  • ...
Diethylene glycol-phthalic anhydride-based polyester polyol. Used in formulating urethane adhesives and sealants. Possesses low Tg, amorphous (or non crystalline) morphology and good wetting... view more
Applications
  • Sealants>Foam
  • Adhesives>Hot-melts
  • Adhesives>Solvent based
  • Adhesives>Radiation Curing (UV/EB)
  • ...
Neopentyl glycol-phthalate anhydride-based polyester polyol. Used in formulating urethane adhesives. Possesses low Tg, amorphous (or non crystalline) morphology and good wetting capacities. Lowers... view more
Applications
  • Sealants>Foam
  • Adhesives>Hot-melts
  • Adhesives>Solvent based
  • Adhesives>Radiation Curing (UV/EB)
  • ...
Summit Trade
Terpene resin. Used as tackifier in hot melt adhesives... view more
Applications
  • Adhesives>Hot-melts
  • Polymers>Synthetic Rubbers
Tosoh
N-aminoethylpiperazine. Designed to manufacture thermoplastic polyamide resin used for hot-melt adhesives... view more
Applications
  • Adhesives>Hot-melts
  • Polymers>Polyamides (PA)
Tosoh
Diethylenetriamine. Designed to manufacture thermoplastic polyamide resin used for hot-melt adhesives... view more
Applications
  • Adhesives>Hot-melts
  • Polymers>Polyamides (PA)
Tosoh
Ethylenediamine. Designed to manufacture thermoplastic polyamide resin used for hot-melt adhesives... view more
Applications
  • Adhesives>Hot-melts
  • Polymers>Polyamides (PA)
Ethylene vinyl acetate copolymer resin. Used in hot melt adhesives. Possesses clarity, gloss and weather resistance. Offers flexibility over wide temperature ranges, as well as high impact strength... view more
Applications
  • Adhesives>Hot-melts
  • Papers & Packagings>Carton side seam (case & carton sealing)
  • Labels / Signs / Decals
Ethylene vinyl acetate copolymer resin. Used in hot melt adhesives. Possesses clarity, gloss and weather resistance. Offers flexibility over wide temperature ranges, as well as high impact strength... view more
Applications
  • Adhesives>Hot-melts
  • Papers & Packagings>Carton side seam (case & carton sealing)
  • Labels / Signs / Decals
Troy Corporation
Flow control and wetting additive. Used for tapes and pressure sensitive adhesives, and sealants. Enhances ability of waterborne systems to coat hydrophobic substrates such as polypropylene, wax... view more
Applications
  • Sealants
  • Adhesives>Hot-melts>Pressure sensitive (HMPSA)
  • Polymers>Polyolefins
United Chemical Technologies
Silanol terminated polydimethyl siloxane. Possesses high viscosity. Forms the matrix component in tackifiers and pressure sensitive adhesives... view more
Applications
  • Adhesives>Hot-melts>Pressure sensitive (HMPSA)
Versalis (Eni Group)
Linear low-, very-low- and ultra-low-density polyethylene. High performance butene, hexene and octene copolymers. Used as a base component for the production of thermo-fusible adhesives in the... view more
Applications
  • Adhesives>Hot-melts
Versalis (Eni Group)
High-density polyethylene. Used as a base component for the production of thermo-fusible adhesives in the packaging, binding, assembly and wood sectors, in gaskets, seals for stoppers, and seals for... view more
Applications
  • Sealants>Pre-formed tape / Gasket
  • Adhesives>Hot-melts
Versalis (Eni Group)
High-density polyethylene. Used as a base component for the production of thermo-fusible adhesives in the packaging, binding, assembly and wood sectors. Offers perfect balance of processability... view more
Applications
  • Adhesives>Hot-melts
Versalis (Eni Group)
Linear low-density polyethylene. Used in extendible, adhesive layer for stretch film, stretch, stretch bubble wrap, stretch with high optical properties, as a base component for the production of... view more
Applications
  • Sealants>Pre-formed tape / Gasket
  • Adhesives>Hot-melts
Versalis (Eni Group)
Linear low-density polyethylene. Used in extendible, adhesive layer for stretch film, stretch, stretch bubble wrap, stretch with high optical properties, as a base component for the production of... view more
Applications
  • Sealants>Pre-formed tape / Gasket
  • Adhesives>Hot-melts
Wuzhou Sun Shine
Glycerin ester of hydrogenated rosin. Used as a tackifier in hot melt and pressure sensitive adhesives... view more
Applications
  • Adhesives>Hot-melts>Pressure sensitive (HMPSA)
Wuzhou Sun Shine
Glycerin ester of hydrogenated rosin. Used as a tackifier in hot melt and pressure sensitive adhesives... view more
Applications
  • Adhesives>Hot-melts>Pressure sensitive (HMPSA)
Wuzhou Sun Shine
Glycerin ester of gum rosin. Used as a tackifier in hot melt and pressure sensitive adhesives... view more
Applications
  • Adhesives>Hot-melts>Pressure sensitive (HMPSA)
Wuzhou Sun Shine
Glycerin ester of gum rosin. Used as a tackifier in hot melt and pressure sensitive adhesives... view more
Applications
  • Adhesives>Hot-melts>Pressure sensitive (HMPSA)
Wuzhou Sun Shine
Pentaerythrite ester of hydrogenated rosin. Used as a tackifier in hot melt and pressure sensitive adhesives... view more
Applications
  • Adhesives>Hot-melts>Pressure sensitive (HMPSA)
Sasol
Channel Alerts

Receive weekly digests on hot topics

Back to Top