Ageflex™ FM4 by BASF is tert-Butylaminoethyl Methacrylate. Used in water-based adhesives as a crosslinking agent and surface active demulsifier. Ageflex™ FM4 offers good adhesion, water solubility... view more

Ageflex™ PEG200DMA by BASF is polyethylene glycol 200 dimethacrylate. Used in water based adhesives and sealants. Acts as a crosslinking agent and a low viscosity hydrophilic reactive diluent... view more

Ageflex™ T3EGDMA by BASF is triethylene glycol dimethacrylate. Acts as a crosslinking agent and a low viscosity hydrophilic reactive diluent. Used in water based adhesives and sealants. Possessses... view more

Allyl methacrylate (AMA) by BASF is a low viscosity monomer with dual allylic and methacrylic functionalities. Offers excellent second stage crosslinking, heat resistance, hardness, and low... view more

Attagel® 17 by BASF is coarser-particle-sized, specialty attapulgite. Used as a very good thixotropic thickening agent for water-borne and solvent systems in adhesives, sealants and caulks. Provides... view more

Attagel® 19 by BASF is a specialty attapulgite. Provides sag resistance, viscosity control, spreadability and very good feathering at low cost. Offers syneresis (liquid separation) control, pigment... view more

Attagel® 20 by BASF is an intermediate, specialty attapulgite. Used as a very good thixotropic thickening agent for water-borne and solvent systems in adhesives, sealants and caulks. Provides sag... view more

Attagel® 30 is an intermediate, specialty attapulgite by BASF. Used as a very good thixotropic thickening agent for water-borne and solvent systems in adhesives, sealants and caulks. Provides sag... view more

Attagel® 350 by BASF is powdered suspension, specialty attapulgite. Provides sag resistance, viscosity control, spreadability and very good feathering at low cost. Used as a very good thixotropic... view more

Attagel® 36 by BASF is specialty attapulgite. Used as a very good thixotropic thickening agent for water-borne and solvent systems in adhesives, sealants and caulks. Offers syneresis (liquid... view more

Attagel® 370 by BASF is powdered suspension, specialty attapulgite. Exhibits reduced water sensitivity, bacteria-, chemical and spatter resistance, very good binding and tabletting features and... view more

Attagel® 390 by BASF is granular suspension, specialty attapulgite. Used as a very good thixotropic thickening agent for water-borne and solvent systems in adhesives, sealants and caulks. Provides... view more

Attagel® 40 by BASF is a fine-milled, specialty attapulgite. Used as a very good thixotropic thickening agent for water-borne and solvent systems in adhesives, sealants and caulks. Provides sag... view more

Attagel® 50 by BASF is an ultrafine, premium, specialty attapulgite. It is used as a very good thixotropic thickening agent for water-borne and solvent systems in adhesives, sealants and caulks... view more

4-Hydroxybutyl Acrylate (4-HBA) by BASF is an acrylate monomer. Exhibits scratch resistance, weatherability and has low VOC. Copolymers of 4-Hydroxybutyl acrylate can be prepared with acrylic acid... view more

BUCA® is a hydrous pulverized kaolin. Acts as an excellent extender for a wide variety of polymeric systems... view more

Basonat® F 200 WD by BASF is a solvent-free polyisocyanate. Designed for adhesive applications. It is an easily dispersable, low viscous cross-linking component for acrylic and PUR dispersions. 2–5... view more

Basonat® LR 9056 by BASF is emulsifier-modified polyisocyanate based on isocyanurated hexamethylene diisocyanate. Used as a hardener in adhesive applications and polymer dispersions containing... view more

Behenyl Acrylate 1822 (BEA 1822) by BASF is a mixture of C18, C20 and C22 acrylates. It is a monofunctional monomer with a long hydrophobic side chain pendant group. It imparts flexibility, impact... view more

Behenyl Acrylate 1822 F (BEA 1822 F) by BASF is behenyl acrylate (acrylic acid ester). It provides low shrinkage, hydrophobicity and weatherability to polymers. Forms homopolymers and copolymers... view more

Behenyl Methacrylate 1822 F (BEMA 1822 F) by BASF is a mixture of C18, C20 and C22 methacrylates. It is a low volatility, monofunctional monomer with a long, hydrophobic side chain. Forms... view more

Butanediol monoacrylate (BDMA or 4-HBA) by BASF is 4-hydroxybutyl acrylate (4-HBA) which forms homopolymers and copolymers. Copolymers of 4-Hydroxybutyl Acrylate (4-HBA) can be prepared with acrylic... view more

Butofan® 2469 by BASF is cold polymerized styrene-butadiene dispersion. Used in some general purpose adhesive applications... view more

Butofan® LS 103 by BASF is styrene/butadiene copolymer dispersion. It offers good tack & peal, high cohesion, excellent sheer, excellent heat resistance and low water take-up. It provides water... view more

Butofan® NS 144 by BASF is an aqueous dispersion of a styrene/butadiene copolymer containing carboxyl groups. Exhibits low temperature performance, high tack and sound damping properties. Butofan®... view more

Butofan® NS 166 by BASF is an aqueous dispersion of a styrene/butadiene copolymer containing carboxyl groups. Used in pressure-sensitive adhesives for self-adhesive products and paper labels... view more

Butofan® NS 222 by BASF is an APEO-free aqueous dispersion of a styrene/butadiene copolymer containing carboxyl groups. Provides a balance of cohesion, tack and superior water resistance. Exhibits... view more

Butofan® NS 278 by BASF is carboxylated styrene-butadiene dispersion. It forms a soft tacky film with good water resistance and good heat ageing characteristics. Butofan® NS 278 is used in general... view more

Butofan® NS 299 by BASF is non-carboxylated aqueous dispersion of a rosin acid stabilized butadiene/styrene copolymer. Used in construction and laminating adhesives. Butofan® NS 299 offers benefits... view more

Butonal® NS 104 by BASF is a cold polymerized, non-carboxylated fatty acid stabilized butadiene/ styrene copolymer. It is APEO- free, extensible, high molecular weight grade. Used in flooring... view more

Butonal® NS 125 by BASF is APEO & ammonia free, cold polymerized, non-carboxylated fatty acid stabilized styrene/butadiene copolymer. Exhibits high modulus and high molecular weight. Offers good... view more

Butonal® NS 131 by BASF is cold polymerized, non-carboxylated fatty acid stabilized butadiene/styrene copolymer. Used in flooring adhesives. Offers improved cohesive strength... view more

Cold polymerized styrene-butadiene dispersion. Used in packaging adhesives... view more

CATALPO® by BASF is hydrous aluminosilicate. Possesses fine particle size, standard brightness, low residue and neutral pH. Used as an extender and an additive in adhesives. Offers very good... view more

Chimassorb® 81 by BASF is a 2-hydroxy-benzophenone which acts as a light stabilizer. Chimassorb® 81 provides good absorption in the UVB regions. Used in adhesives... view more

Chimassorb® 944 FDL by BASF is a high molecular weight hindered amine HALS functions as light stabilizer. It has low volatility and offers excellent compatibility & good resistance to extraction... view more

Collacral® C by BASF is a thickener for polymer dispersions and other aqueous systems. Used in sealants... view more

Collacral® HP by BASF is an excellent low-shear thickener. Offers high efficiency, reduced sagging and prolonges open time. Collacral® HP is used in tile adhesives, construction adhesives and... view more

Collacral® VA 64 by BASF is a thickener used in industrial adhesives... view more

Cyclohexyl Methacrylate (CHMA) by BASF is an acrylate monomer. It is a methacrylic acid ester. It imparts chemical resistance, hydrolytic stability, hydrophobicity, scratch resistance... view more

Cyclohexyl vinyl ether (CHVE) by BASF is a high reactive monomer for polymerization, cross-linking and reactive diluents for UV curing. Shows exceptional quality and good consistency. It is the best... view more

DSX 1514 by BASF is a non-ionic polyurethane-based associative thickener. Designed to improve the application and hiding properties of latex systems including aqueous adhesives. DSX 1514 provides... view more

DSX 1550 by BASF is a non-ionic polyurethane polymer. Used as a rheology modifier for waterborne systems and putties. Provides thickening and modification of flow properties of waterborne polymers... view more

Non-ionic polyurethane. Used as rheology modifier. Offers very good film forming properties. Provides good pigment wetting and high UV stability... view more

Polyurethane. Acts as a rheology modifier. Provides very good pigment binding properties and UV-resistance. Used in aqueous adhesives... view more

Darocur® TPO by BASF is 2,4,6-Trimethylbenzoyl-diphenyl-phosphineoxide functions as a photoinitiator. Used in reactive and radiation curing adhesives for wood, metal, plastic, paper and optical... view more

Dazomet Technical by BASF is a biocide, 3,5-dimethyl-2H-1,3,5-thiadiazinane-2-thione. Dazomet Technical is used in adhesives... view more

Dehydran® 1620 by BASF is a non-ionic mixture of specially modified alcohols and a polysiloxane adduct. Used as a defoamer in contact adhesives and UV-curing systems. It does not separate and offers... view more

Dehydran® 520 V by BASF is an antifoaming agent. It is a solvent-free, 100% effective defoamer based on vegetable raw materials. It is readily biodegradable. It is free of silicone, siloxane and... view more

Diethyleneglycol divinyl ether (DVE-2) by BASF is a divinyl compound with high reactivity, exceptional quality and good consistency. It is the best choice for a wide range of syntheses including... view more

Dihydrodicyclopentadienyl acrylate (DCPA) by BASF is an acrylate monomer. It readily undergoes addition reactions with a wide variety of organic and inorganic compounds and forms homopolymers and... view more

Dispex™ A40 by BASF is a solution of ammonium salt of acrylic polymer in water. Dispex™ A40 is used as a highly effective, low viscosity dispersing agent for water-borne adhesive systems... view more

Dispex® CX 4320 (Old name: Pigment Disperser® MD 20) is a particularly effective dispersing agent for dispersing inorganic fillers and pigments. It improves wet scrub and blocking resistance... view more

Dispex® G40 by BASF is a solution of a sodium salt of an acrylic copolymer in water. Used as a highly effective, low viscosity dispersing agent for water-borne adhesive systems. Dispex® G40 shows... view more

Dispex™ GA40 by BASF is a solution of an ammonium salt of an acrylic copolymer in water. Dispex™ GA40 is used as an effective, low viscosity dispersing agent for water-borne adhesive systems... view more

Dispex® N100 by BASF is a solution of a sodium salt of an acrylic polymer in water. Used as a highly effective dispersing agent for water-borne systems like plasters, wall finishes, cement and tile... view more

Dispex® N40 by BASF is a solution of a sodium salt of an acrylic polymer in water. It is used as a highly effective, low viscosity dispersing agents for water-borne systems... view more

Dispex® Ultra FA 4420 (Old name: Efka® 6220) by BASF is fatty acid modified polyester based dispersing agent. Designed for water-based, hot-melt, solvent-based, reactive and radiation curing... view more

Dispex® Ultra FA 4425 (Old name: Efka® 6225) by BASF is fatty acid modified polyester. Acts as a dispersing agent. Dispex® Ultra FA 4425 is used in water-based, hotmelt, solvent-based, reactive and... view more

Dispex® Ultra FA 4431 (Old name: Efka® 6230) by BASF is aliphatic polyether with acidic groups. Acts as a dispersing agent. Offers benefits such as reduced grinding and dispersion time, increased... view more

Dispex® Ultra PA 4560 (Old name: Efka® 4560) by BASF is high molecular weight modified polyacrylate. Acts as a dispersing agent. Offers benefits such as improved gloss, color strength, flocculation... view more

Dispex® Ultra PX 4290 supplied by BASF is a broad spectrum, high molecular weight, solvent- & APEO-free dispersing agent for organic and inorganic pigments. It provides excellent pigment... view more

Disponil® ALS 33 by BASF is anionic ammonium lauryl sulfate. Used as emulsifier in adhesives. It stabilizes the polymer dispersion during polymerisation and beyond - throughout the packaging... view more

Disponil® FES 61 by BASF is fatty alcohol polyglycol ether sulfate, sodium salt. Used as emulsifier for the manufacture of emulsion polymers for adhesives. Stabilizes the polymer dispersion during... view more

Disponil® OP 3070 by BASF is alkylaryl polyglycol ether. Used as co-emulsifier for the manufacture of emulsion polymers used in adhesives. Disponil® OP 3070 provides good mechanical stability and... view more

Disponil® SUS IC 680 by BASF is an anionic dihexyl sulphosuccinate, sodium salt. Provides stabilizing properties. Used as emulsifier in polymer emulsions for adhesives. Disponil® SUS IC 680 is also... view more

Disponil® SUS IC 875 by BASF is an anionic di-2-ethylhexyl sulphosuccinate, sodium salt. Used as emulsifier for the emulsion polymerization of practically all types of monomers used in adhesives... view more

Dodecyl vinyl ether (DDVE) by BASF is a monomer for polymerization, cross-linking and reactive diluents for UV curing. With high reactivity, exceptional quality and good consistency, it is the best... view more

Efka® 3570 by BASF is neutralized fluorocarbon modified polyacrylate. Acts as a wetting agent. Used in water based adhesives. Offers benefits such as very good anti-cratering behavior, improved... view more

Efka® 3580 by BASF is a solvent-free modified polysiloxane. Used in water-based adhesives. Acts as a wetting agent. Efka® 3580 offers very good anti-cratering behaviour and levelling, better... view more

Efka® 5207 by BASF is a hydroxy functional unsaturated modified carboxylic acid with pigment affinic groups. Used in hot melt, solvent based, reactive, water based & radiation curing adhesives... view more

Efka® FA 4644 by BASF is an unsaturated polyamide and acid ester salts. It acts as a low molecular weight dispersing agent. Offers reduced dispersion time, improved stabilization of the pigment... view more

Efka® FA 4665 by BASF is a low-molecular weight dispersing agent. It is unsaturated carboxylic acid, combined with a very compatible organically modified polysiloxane. It offers reduced dispersion... view more

Efka® PB 2720 (Old name: Efka® 2720) by BASF is a silicone-free solution of defoaming substances. Used in hot-melt, solvent-based, reactive and radiation curing adhesives and in sealants. Efka® PB... view more

Efka® SL 3236 by BASF is solvent-free modified polysiloxane. Used in hotmelt, solvent based, reactive and radiation curing adhesives and in sealants. Acts as a wetting agent. Offers benefits such as... view more

Empol® 1003 by BASF is a tall oil fatty acid, TOFA. It is a undistilled dimer acid. Empol® 1003 imparts the highly desirable properties of flexibility, elasticity and high impact strength... view more

Empol® 1008 by BASF is a distilled/ fully hydrogenated dimer, oleic acid. Designed for adhesive applications. Empol® 1008 imparts the highly desirable properties of flexibility, elasticity and high... view more

Empol® 1012 by BASF is a tall oil fatty acid, TOFA. It is a distilled /fully hydrogenated dimer acid. Empol® 1012 imparts the highly desirable properties of flexibility, elasticity and high impact... view more

Empol® 1016 by BASF is a light color oleic acid. Contains 80% dibasic acid, 16% polybasic acid and 4% monobasic acid. It is an undistilled dimer acid for adhesive applications. Empol® 1016 imparts... view more

Empol® 1026 by BASF is a tall oil fatty acid, TOFA. It is a undistilled dimer acid. Empol® 1026 imparts the highly desirable properties of flexibility, elasticity and high impact strength... view more

Empol® 1028 by BASF is a tall oil fatty acid, TOFA. It is a undistilled dimer acid. Empol® 1028 by BASF imparts the highly desirable properties of flexibility, elasticity and high impact strength... view more

Empol® 1043 by BASF is a tall oil fatty acid, TOFA. It is a trimer acid. Empol® 1043 by BASF imparts the highly desirable properties of flexibility, elasticity and high impact strength... view more

Empol® 1045 by BASF is trimer acid. Used in sealants. Offers crosslinking, high functionality, flexibilizing effect and lower viscosity... view more

Empol® 1061 by BASF is a tall oil fatty acid, TOFA. It is a distilled dimer acid. Empol® 1061 by BASF imparts the highly desirable properties of flexibility, elasticity and high impact strength... view more

Empol® 1062 by BASF is a tall oil fatty acid, TOFA. It is a distilled /partially hydrogenated dimer acid. Empol® 1062 by BASF imparts the highly desirable properties of flexibility, elasticity and... view more

Ethyl vinyl ether by BASF has high reactivity, exceptional quality and good consistency. It is the best choice for a wide range of syntheses including polymerization, addition and electro cyclic... view more

Ethyldiglycol acrylate (EDGA) by BASF is an acrylate monomer which readily undergoes addition reactions with a wide variety of organic and inorganic compounds and forms homopolymers and copolymers... view more

FoamStar® A 10 by BASF is a defoaming molecule compounded in an enhanced mineral-oil system. Used in acrylic and vinyl acrylic adhesives. Provides non-separating and non settling, very fast... view more

FoamStar® A 12 by BASF is a defoaming agent. It is a defoaming molecule compounded in an enhanced mineral-oil system. It is effective with acrylic and vinyl acrylic adhesives. FoamStar® A 12... view more

FoamStar® ED 2526 by BASF is a defoaming agent. It is based on oil/polymer defoamer. It is suitable with acrylics and acrylic copolymers, NR, PVP, SBR, PVOH, PVAC, EVA and PUD. FoamStar® ED 2526 is... view more

FoamStar® SI 2210 by BASF provides a strong spontaneous defoaming effect and outstanding long-term defoaming persistency. It is a blend of specially modified alcohols and polysiloxane adduct. Offers... view more

FoamStar® SI 2250 (Old name: Efka® 2550) by BASF is a silicon-based defoamer. FoamStar® SI 2250 is used in water-based adhesives... view more

Foamaster® 8034 FA by BASF is a blend of hydrocarbons and non-ionic surfactants. Used as defoamer for emulsion adhesives. It can be added at any stage in the manufacture and is especially effective in... view more

Foamaster® A-7 by BASF is 100% active defoamer that contains no silicone or mineral oil. Recommended for adhesives where sensitivity to silicone or mineral oil is of prime importance. Recommended... view more

Foamaster® MO 2110 NC by BASF is a silicone-free, 100% active defoamer, originally compounded especially for polyvinyl acetate emulsions. It is chemically compatible with the other ingredients used... view more

Foamaster® MO 2111 NC by BASF is a non-ionic broad spectrum liquid defoamer. Used in latex adhesive systems. It can be stored under the usual storage and temperature conditions for at least a year... view more

Foamaster® MO 2134 (Old name: Foamaster® 8034) by BASF is a blend of hydrocarbons and non-ionic surfactants. Acts as a defoamer based on mineral oil. Used for emulsion adhesives. It can be added at... view more

Foamaster® MO 2150 (Old name: Foamaster® 50) by BASF is a silicone-free blend of hydrophobic components and paraffinic hydrocarbons. Used as a defoamer in aqueous adhesives. Provides good product... view more

Foamaster® MO 2170 by BASF is a 100% active defoamer used for application of adhesives from synthetic latex. In adhesives applications, 1-2 % of Foamaster® MO 2170 based on the weight of the latex... view more

Foamaster® MO 2172 (Old name: Foamaster® AP) by BASF is 100% active, water-free defoamer. Used in waterborne adhesive. It is proprietary blend of oils and silica derivatives. Provides high defoaming... view more