OK
The Universal Selection Source:
Adhesives Ingredients
37 products match your search
Product Name
Supplier
Description
Aeroxide® TiO2 P 25 is a hydrophilic fumed titanium dioxide. Acts as a catalyst. Offers benefits such as process related high purity, heat stabilizing, improvement of ageing properties at high... view more
Applications
  • Sealants
  • Polymers>Synthetic Rubbers
  • Polymers>Silicones (Si)
33% triethylenediamine and 67% dipropylene glycol catalyst . Has low-viscosity. Used in adhesives and sealants applications... view more
Applications
  • Adhesives>Water-based
Tertiary amine salt. Used in adhesives. Acts as a cure accelerator. Offers advantages such as long room temperature pot life, fast cures at 146 °F, high glass transition temperatures and improved... view more
Applications
  • Adhesives
  • Polymers>Epoxies (EP)
High-purity catalyst for polyurethane applications. It consists of 99.95 wt% (minimum) triethylenediamine on a water-free, amines base... view more
Applications
  • Adhesives>Water-based
  • Polymers>Polyurethanes>PU-Prepolymers
It acts as an accelerator for dicyandiamide cured epoxy resins. Provides longer pot life than standard substituted urea accelerators without increasing activation temperature. It cures rapidly above... view more
Applications
  • Adhesives>Film/ Web
  • Polymers>Epoxies (EP)
Substituted urea-based cure accelerator. Used in one-component paste and film adhesives. Offers advantages such as rapid cure and property development, high glass transition temperature and good... view more
Applications
  • Adhesives>Film/ Web
  • Polymers>Epoxies (EP)
Substituted urea-based cure accelerator. Used in one-pack paste and film adhesives. Possesses good flow properties. Offers benefits such as rapid cure and property development, high glass transition... view more
Applications
  • Adhesives>Film/ Web
  • Polymers>Epoxies (EP)
1-Phenyl-3, 3-dimethylurea. Acts as a substituted urea-based accelerator for dicyandiamide cured epoxy resins. It is a finely grounded version of Amicure® UR accelerator. Amicure® UR7/10 is supplied... view more
Applications
  • Adhesives>Film/ Web
  • Polymers>Epoxies (EP)
Dimethylaminomethylphenol. Acts as a curing agent, catalyst for epoxy/polysulfide cures and an accelerator for polyamide or amidoamine curing agents. The blends of Ancamide® 1110 and Ancamide® K54... view more
Applications
  • Adhesives
  • Polymers>Epoxies (EP)
  • Buildings & constructions>Concrete
Modified polyamine. Used in one-component adhesives. Acts as a latent curing agent. Offers benefits such as long pot life, rapid cure above their temperature of activation and good adhesion... view more
Applications
  • Adhesives
Accelerated modified aliphatic amine. Used in adhesives. Acts as a curing agent. Offers benefits such as very rapid cure and property development, fast low-temperature cure and phenol-free... view more
Applications
  • Adhesives
  • Polymers>Epoxies (EP)
Modified aliphatic amine. Used in one-component conduction or induction heat-cure adhesives. Acts as a curing agent. Possesses very rapid reactivity above 158 °F, rapid green strength development... view more
Applications
  • Adhesives
  • Polymers>Epoxies (EP)
Modified polyamine. Used in one-component convection or induction heat-cured adhesives. Acts as a latent curing agent. Possesses very good reactivity and very good green strength development... view more
Applications
  • Adhesives
  • Polymers>Epoxies (EP)
It acts as a tertiary amine based cure accelerator for dicyandiamide and anhydride cured epoxy resin systems. Offers rapid cure at elevated temperatures, low viscosity and excellent adhesion... view more
Applications
  • Adhesives
  • Polymers>Epoxies (EP)
  • Electrical & Electronic Bonding>Poting & Encapsulating
Tertiary amine. Used in sealant and concrete adhesives applications. Acts as a curing agent as an activator... view more
Applications
  • Adhesives
  • Sealants
  • Polymers>Polyamides (PA)
  • Polymers>Amines
  • ...
Metal catalysts based on platinum. Used to cure vinylfunctional silicone polymers with SiH-functional silicone crosslinkers. Added only in very small quantities. Use level: 10-50 ppm in a... view more
Applications
  • Adhesives
  • Sealants
  • Polymers>Silicones (Si)
Metal catalysts based on platinum. Used to cure vinylfunctional silicone polymers with SiH-functional silicone crosslinkers. Added only in very small quantities. Use level: 10-50 ppm in a... view more
Applications
  • Adhesives
  • Sealants
  • Polymers>Silicones (Si)
Metal catalysts based on platinum. Used to cure vinylfunctional silicone polymers with SiH-functional silicone crosslinkers. Added only in very small quantities. Use level: 10-50 ppm in a... view more
Applications
  • Adhesives
  • Sealants
  • Polymers>Silicones (Si)
Metal catalysts based on platinum. Used to cure vinylfunctional silicone polymers with SiH-functional silicone crosslinkers. Added only in very small quantities. Use level: 10-50 ppm in a... view more
Applications
  • Adhesives
  • Sealants
  • Polymers>Silicones (Si)
Catalyst for acetate sealants. Used for crosslinking hydroxyfunctional silicone polymers with hydrolizable silanes. Use level: from 0.3 to 0.13 percent by weight of total ingredients for silicone... view more
Applications
  • Sealants
  • Polymers>Silicones (Si)
Catalyst for oxime sealants. Used for crosslinking hydroxyfunctional silicone polymers with hydrolizable silanes. Assures moderate skin formation times and curing rates. Use level: from 0.3 to... view more
Applications
  • Sealants
  • Polymers>Silicones (Si)
Dabco® 1029 by Evonik acts as a catalyst. Offers good flow, fast demold times and longer cream time. Used in adhesives and sealants... view more
Applications
  • Adhesives
  • Sealants
  • Polymers>Polyesters
  • Footwear & leather>Shoe soles
Catalyst that exhibits stronger catalytic activity versus Dabco DC1 catalyst. Enhances the cure of the system without significantly changing the front end of the reaction. Possesses delayed action... view more
Applications
  • Adhesives
  • Polymers>Polyurethanes>Polyols
Is a low emission delayed action co-catalyst that strongly promotes the urethane (polyol-isocyanate) reaction while maintaining cream time and maintaining pot life. It does not contribute to amine... view more
Applications
  • Adhesives
  • Polymers>Polyurethanes>Polyols
Dabco® NE1070 by Evonik is a non-emissive amine that promotes the urethane (polyol-isocyanate) reaction. It is used in flexible foam applications to meet automotive OEM emission specifications such... view more
Applications
  • Adhesives
  • Polymers>Polyurethanes>Polyols
Dibutyltin dilaurate, DBTDL. Acts as a catalyst. It can provide an enhanced reactivity when used in combination with amine catalysts. Dabco® T-12 improves mechanical properties in slabstock foams... view more
Applications
  • Adhesives
  • Sealants
  • Polymers>Polyurethanes>Isocyanates
  • Polymers>Polyurethanes>Polyols
Elevated-temperature curing agent. Used in adhesives. Possesses accelerator properties. Offers compatibility with liquid resin... view more
Applications
  • Adhesives
  • Polymers>Epoxies (EP)
Elevated-temperature curing agent. Used in adhesives. Possesses very good accelerator properties... view more
Applications
  • Adhesives
  • Polymers>Epoxies (EP)
2-ethyl-4-methyl Imidazole. Used in adhesives for wood, metal and glass. Acts as a curing agent and a cure accelerator... view more
Applications
  • Adhesives
  • Polymers>Epoxies (EP)
  • Wood & Related Industries
Imidazole curing agent. Used in adhesives. Possesses accelerator properties. Offers very rapid development of properties... view more
Applications
  • Adhesives
  • Polymers>Epoxies (EP)
This DBU (Diazobicycloundecene) catalyst is a tertiary amine that strongly promotes the urethane (polyol-isocyanate) reaction. Has very strong gelation capability and low odor. It is used mainly for... view more
Applications
  • Adhesives
  • Sealants>Foam
  • Polymers>Polyurethanes>Isocyanates
  • Polymers>Polyurethanes>Polyols
  • ...
Delayed action tertiary amine based on DBU. Acts as a catalyst. Promotes the urethane (polyol-isocyanate) reaction in microcellular, rigid, integral skin and elastomer applications. Is... view more
Applications
  • Adhesives
  • Polymers>Polyurethanes>Polyols
Low emissive, delayed action tertiary amine based on DBU. Acts as a catalyst. Is particularly recommended for use with low activity aliphatic isocyanates. Possesses long pot life and fast back-end... view more
Applications
  • Adhesives
  • Polymers>Polyurethanes>Polyols
Blocked diamine. Used as an accelerator for moisture curing in 1 pack polyurethane systems... view more
Applications
  • Adhesives
  • Polymers>Polyurethanes>PU-Prepolymers
Hydrophilic fumed titanium dioxide. Used in sealants. Acts as catalyst, catalyst support and photocatalyst. Possesses heat stabilizing properties. Offers benefits such as increased specific surface... view more
Applications
  • Sealants
  • Polymers>Synthetic Rubbers
  • Polymers>Silicones (Si)
Hydrophilic fumed titanium dioxide. Used in sealants. Acts as both catalyst and catalyst carrier. Offers benefits such as high (photo-)catalytic activity upon UV-irradiation, good transparency in... view more
Applications
  • Sealants
Hydrophilic fumed titanium dioxide. Used in sealants. Acts as both catalyst and catalyst carrier. Offers benefits such as high (photo-)catalytic activity upon UV-irradiation, good transparency in... view more
Applications
  • Sealants
Back to Top