OK
The Universal Selection Source:
Adhesives Ingredients
59 products match your search
Product Name
Supplier
Description
Solvent-free, modified special curing agent. The short pot life only allows production of small resin / hardener mixtures. Offers fast curing even at low temperatures. Used in fast curing adhesive... view more
Applications
  • Adhesives
Low viscosity, Mannich based special curing agent. Imparts very good water resistance and adhesion under wet conditions. Provides good mechanical performance, superior surface appearance and blush... view more
Applications
  • Adhesives
  • Polymers>Epoxies (EP)
Mannich base type curing agent with a high reactivity. Possesses good mechanical properties and good resistance against mineral acids. Offers high gloss and water resistant. Exhibits fast curing... view more
Applications
  • Adhesives
  • Buildings & constructions>Floorcovering
  • Buildings & constructions>Joint cement / Grouting
Solvent and phenol-free mannich base type curing agent with a high reactivity. Possesses good mechanical properties, good resistance against solvents and mineral acids. Offers fast curing even at... view more
Applications
  • Adhesives
  • Buildings & constructions>Floorcovering
  • Buildings & constructions>Joint cement / Grouting
High viscosity, modified mannich base hardener with a favorable mixing ratio. Acts as a curing agent. Offers good surface appearance, good chemical resistance. The resulting surfaces have a high... view more
Applications
  • Adhesives
  • Polymers>Epoxies (EP)
Amidoamine with a low viscosity, low imidazoline content and dark color. Is based on tall oil fatty acid and polyamines as well as fast setting. Exhibits very good epoxy resin compatibility... view more
Applications
  • Adhesives
  • Polymers>Epoxies (EP)
Low viscosity amidoamine, low imidazoline content, fast-setting epoxy curing agent based on tall oil fatty acid and polyamines. Provides good adhesion, chemical resistance, low exotherm and high... view more
Applications
  • Adhesives
  • Polymers>Epoxies (EP)
Very low viscosity amidoamine, medium imidazoline content epoxy curing agent based on tall oil fatty acid and polyamines. Is moderately fast setting. Exhibits very good compatibility with epoxy... view more
Applications
  • Adhesives
  • Polymers>Epoxies (EP)
Aliphatic amidoamine. Acts as a curing agent. Provides advantages such as low viscosity, extended pot life and wide range of combining ratios. Shows complete compatibility with conventional epoxy... view more
Applications
  • Adhesives
  • Polymers>Epoxies (EP)
Accelerated amidoamine. Acts as a moderately reactive room temperature curing agent. Possesses good mechanical and chemical properties. Compositions based on EPON™ Resin 828 and EPIKURE 3072 cure... view more
Applications
  • Adhesives
  • Buildings & constructions>Concrete
Moderate-viscosity, modified polyamidoamine adduct. Acts as a curing agent. Is blush-resistant and features a 1-to-1 by weight/mix/ratio with standard liquid epoxy resins. Possesses high corrosion... view more
Applications
  • Adhesives
  • Polymers>Epoxies (EP)
High molecular weight, reactive polyamide. Is a semi-solid epoxy curing agent and blending resin based on dimerized fatty acid as well as polyamines. Offers very good water and corrosion resistance... view more
Applications
  • Adhesives
  • Buildings & constructions>General caulking & sealing
  • Buildings & constructions>Joint cement / Grouting
High molecular weight, reactive polyamide, high viscosity epoxy curing agent based on dimerized fatty acid and polyamines. Possesses long pot life and very good adhesion. Offers very good pigment... view more
Applications
  • Adhesives
  • Polymers>Epoxies (EP)
  • Buildings & constructions>Joint cement / Grouting
  • Buildings & constructions>General caulking & sealing
High molecular weight, reactive polyamide, high viscosity epoxy curing agent based on dimerized fatty acid and polyamines. Possesses long pot life and very good adhesion. Offers very good pigment... view more
Applications
  • Adhesives
  • Polymers>Epoxies (EP)
  • Buildings & constructions>General caulking & sealing
  • Buildings & constructions>Joint cement / Grouting
High molecular weight, reactive polyamide, high viscosity epoxy curing agent based on dimerized fatty acid and polyamines. Possesses long pot life and very good adhesion. Offers very good pigment... view more
Applications
  • Adhesives
  • Polymers>Epoxies (EP)
  • Buildings & constructions>Joint cement / Grouting
  • Buildings & constructions>General caulking & sealing
Medium viscosity reactive polyamide curing agent based on dimerized fatty acid and polyamines. Offers very good adhesion, good water resistance, toughness and flexibility. Exhibits good pigment and... view more
Applications
  • Adhesives
  • Polymers>Epoxies (EP)
  • Buildings & constructions>Joint cement / Grouting
  • Buildings & constructions>General caulking & sealing
Low viscosity reactive polyamide, high imidazoline, moderate molecular weight epoxy curing agent based on dimerized fatty acid and polyamines. Possesses very good compatibility with epoxy resin... view more
Applications
  • Adhesives
  • Polymers>Epoxies (EP)
Low viscosity, modified polyamide epoxy curing agent based on dimerized fatty acid and polyamines. Offers good flexibility and very good corrosion resistance. Exhibits good blush resistance... view more
Applications
  • Adhesives
  • Polymers>Epoxies (EP)
Proprietary oligomeric polyamine. Acts as a curing agent. Possesses high degree of toughness and flexibility. Exhibits improved combinations of elongation, strength, modulus, abrasion resistance... view more
Applications
  • Adhesives
  • Polymers>Epoxies (EP)
Unmodified aliphatic amine. Acts as a curing agent. Due to its tendency to form complexes with atmospheric carbon dioxide, particularly in humid conditions, it is most often formulated, adducted or... view more
Applications
  • Adhesives
  • Polymers>Epoxies (EP)
  • Polymers>Polyamides (PA)
Solution of an aliphatic amine adduct in a mixture of xylene, propylene glycol monomethyl ether and methyl isobutyl ketone. Acts as a curing agent. Possesses good chemical, solvent and corrosion... view more
Applications
  • Sealants
  • Polymers>Epoxies (EP)
  • Buildings & constructions>Concrete
Unmodified aliphatic amine. Acts as a curing agent. Due to its tendency to form complexes with atmospheric carbon dioxide, particularly in humid conditions, it is most often formulated, adducted or... view more
Applications
  • Adhesives
  • Polymers>Polyamides (PA)
  • Polymers>Epoxies (EP)
Unmodified D230-type polyoxypropylenediamine. Acts as a curing agent. Has moderate reactivity, low viscosity, low vapor pressure, low color and high primary amine content. Offers benefits such as... view more
Applications
  • Adhesives
  • Sealants
  • Polymers>Epoxies (EP)
  • Buildings & constructions>Floorcovering
  • ...
Unmodified D230-type polyoxypropylenediamine. Acts as a curing agent. Has moderate reactivity, low viscosity, low vapor pressure, light color and improved color retention. Offers benefits such as... view more
Applications
  • Adhesives
  • Sealants
  • Polymers>Epoxies (EP)
Unmodified aliphatic amine. Acts as a curing agent. Due to its tendency to form complexes with atmospheric carbon dioxide, particularly in humid conditions, it is most often formulated, adducted or... view more
Applications
  • Adhesives
  • Polymers>Epoxies (EP)
  • Polymers>Polyamides (PA)
Unmodified aliphatic amine. Acts as a curing agent. Due to its tendency to form complexes with atmospheric carbon dioxide, particularly in humid conditions, it is most often formulated, adducted or... view more
Applications
  • Adhesives
  • Polymers>Polyamides (PA)
  • Polymers>Epoxies (EP)
Phenol-free, modified mannich base epoxy curing agent. Has low temperature cure, light color and low viscosity. Offers very good moisture resistance, high gloss and carbonate free surfaces. Used in... view more
Applications
  • Adhesives
  • Polymers>Epoxies (EP)
A tertiary amine, is tris (dimethyl amino-methyl) phenol. Acts as a curing agent. Offers high reactivity, low viscosity, low vapor pressure and good color. Used in concrete adhesives and bake cured... view more
Applications
  • Adhesives
  • Sealants
  • Polymers>Epoxies (EP)
  • Buildings & constructions>Concrete
Modified aliphatic amine. Acts as a curing agent. Offers benefits such as light color, good mar resistance, resistance to amine carbonate formation (“blush”, “bloom” or “sweat-out”) and convenient... view more
Applications
  • Adhesives
  • Polymers>Epoxies (EP)
Low to moderate viscosity, fastsetting, modified aliphatic amine. Acts as a curing agent. Possesses features including high heat distortion temperatures, modest blush resistance and very good... view more
Applications
  • Adhesives
  • Polymers>Epoxies (EP)
Modified aliphatic amine. Offers benefits such as rapid cure rates in thin sections, low temperature cure and convenient combining ratio. Used in rapid setting adhesives and equal volume packaged... view more
Applications
  • Adhesives
  • Polymers>Epoxies (EP)
Moderately reactive, low viscosity aliphatic amine. Acts as a curing agent. Is low color, blush free and sweat free. Possesses water insensitivity and improved color retention as compared to... view more
Applications
  • Adhesives
  • Sealants
  • Polymers>Epoxies (EP)
Very reactive modified aliphatic amine adduct. Acts as a curing agent. Has been developed for applications where relatively short cure periods at room temperature are required... view more
Applications
  • Adhesives
Modified aliphatic amine. Acts as a light colored, low viscosity epoxy curing agent. Possesses reduced vapor pressure, good chemical resistance, low shrinkage and less critical mix ratios. Offers... view more
Applications
  • Adhesives
  • Polymers>Epoxies (EP)
Low viscosity aliphatic amine adduct. Acts as a curing agent. Is relatively reactive. Imparts high degree of rigidity and mechanical strength to cured systems. Its reduced vapor pressure, less... view more
Applications
  • Adhesives>Water-based
  • Polymers>Epoxies (EP)
Very low viscosity, light colored cycloaliphatic amine. As a sole curing agent, it can yield epoxy systems with relatively high heat distortion properties when properly cured. Possesses resistance... view more
Applications
  • Sealants
  • Polymers>Epoxies (EP)
Low viscosity, modified cycloaliphatic amine capable of effecting thorough cures in epoxy resin systems at normal room temperature. Acts as a curing agent. Offers benefits such as good overnight... view more
Applications
  • Sealants
  • Polymers>Epoxies (EP)
Relatively low viscosity, modified amine adduct. Acts as a light-colored epoxy curing agent which, when combined with epoxy resins, cures to clear, tack-free films under low-temperature and high... view more
Applications
  • Adhesives
  • Polymers>Epoxies (EP)
Very low viscosity, modified cycloaliphiatic amine. Acts as a light colored epoxy curing agent. Possesses good flexibility, very good gloss and color stability. Offers benefits such as good chemical... view more
Applications
  • Sealants
  • Polymers>Epoxies (EP)
  • Buildings & constructions>Joint cement / Grouting
Low viscosity, modified cycloaliphiatic amine adduct. Acts as a room temperature curing agent for epoxy resins. Offers benefits such as very good resistance to blush or sweat-out. Moderate to high... view more
Applications
  • Sealants
  • Polymers>Epoxies (EP)
Low viscosity, modified cycloaliphiatic amine. Acts as a light colored epoxy curing agent. Is excellent where high gloss, self-leveling, smooth, chemically resistant, light fast properties are... view more
Applications
  • Adhesives
  • Polymers>Epoxies (EP)
  • Buildings & constructions>Joint cement / Grouting
Low viscosity, light colored cycloaliphatic amine. Acts as a curing agent. Possesses very good resistance to blush or sweat-out and high reactivity at room temperature. Offers quick hardening... view more
Applications
  • Sealants
  • Polymers>Epoxies (EP)
Low viscosity, low color modified cycloaliphatic amine epoxy curing agent. Exhibits very good corrosion resistance, chemical resistance as well as good color stability. Offers good amine blush... view more
Applications
  • Sealants
  • Polymers>Epoxies (EP)
  • Buildings & constructions>Concrete
  • Buildings & constructions>General caulking & sealing
  • ...
Low viscosity, reaction product of ethylenediamine and methyl isobutyl ketone. Imparts extended pot life of 7-8 hours. Provides similar performance when compared to unmodified aliphatic amines or... view more
Applications
  • Adhesives
  • Polymers>Epoxies (EP)
Light color and low viscosity modified cycloaliphatic amine curing agent. Contains no nonylphenol. Provides benefits such as low yellowing characteristics, superior surface appearance, blush... view more
Applications
  • Adhesives
  • Polymers>Epoxies (EP)
Low viscosity, light colored modified cycloaliphatic amine. Contains no nonylphenol. Acts as a curing agent. When properly formulated the resultant surfaces are tack free and show a very good... view more
Applications
  • Adhesives
  • Polymers>Epoxies (EP)
Low viscosity and a very light color modified cycloaliphatic amine. Acts as a curing agent. Offers benefits such as low yellowing with standard epoxy resins and good surface appearance... view more
Applications
  • Adhesives
  • Polymers>Epoxies (EP)
Is a 53% solids, high molecular weight non-ionic aqueous dispersion of a modified polyamine adduct curing agent. Imparts good compatibility with other epoxy resin dispersions and mechanical... view more
Applications
  • Adhesives
  • Polymers>Epoxies (EP)
Modified polyamidoamine adduct supplied at 50 percent solids in water, which when combined with liquid epoxy resins, provides completely solvent-free, two-package epoxy systems. Acts as a curing... view more
Applications
  • Sealants
  • Polymers>Epoxies (EP)
  • Buildings & constructions>Concrete
Water reducible amine adduct supplied at 60 percent solids in water, 2-propoxyethanol and glacial acetic acid. Acts as a curing agent. Possesses resistance to flash rusting, very good film... view more
Applications
  • Sealants
  • Polymers>Epoxies (EP)
It is the modified polyamines adduct to cross-link epoxy resins. Acts as curing agent. It is supplied at 68% weight solids in ethylene glycol monopropyl ether. It provides outstanding corrosion... view more
Applications
  • Adhesives>Water-based
  • Polymers>Epoxies (EP)
  • Buildings & constructions
  • Electrical & Electronic Bonding
  • ...
It is the cyclohexane dimethanol diglycidyl ether. Acts as viscosity reducing modifier. It is fully compatible with the entire bisphenol A based series of epoxy resins as well as higher... view more
Applications
  • Adhesives
  • Polymers>Epoxies (EP)
  • Buildings & constructions
  • Electrical & Electronic Bonding>Poting & Encapsulating
  • ...
It is the 2-ethylhexyl glycidyl ether. Acts as viscosity reducing modifier. It is compatible with other epoxy resins in all proportions and is easily blended with liquid resin at room temperature... view more
Applications
  • Adhesives
  • Polymers>Epoxies (EP)
  • Buildings & constructions
  • Electrical & Electronic Bonding
  • ...
It is the commercial grade butyl glycidyl ether. Acts as viscosity reducing modifier. It is compatible with other epoxy resins in all proportions and is easily blended with liquid resin at room... view more
Applications
  • Adhesives
  • Polymers>Epoxies (EP)
  • Buildings & constructions
  • Electrical & Electronic Bonding
  • ...
It is the commercial grade o-cresyl glycidyl ether. Acts as viscosity reducing modifier. Has low viscosity, increased peel and impact strength, excellent retention of mechanical and chemical... view more
Applications
  • Adhesives
  • Polymers>Epoxies (EP)
  • Transportation (excl. Automotive)>Aircraft & Aerospace
  • Transportation (excl. Automotive)>Truck
  • ...
It is the p-t-butyl phenyl glycidyl ether. Acts as viscosity reducing modifier. Has low viscosity, low odor and increased peel strength, impact strength, filler loading. It is viscosity reducing... view more
Applications
  • Adhesives
  • Polymers>Epoxies (EP)
  • Transportation (excl. Automotive)>Aircraft & Aerospace
  • Transportation (excl. Automotive)>Truck
  • ...
HELOXY™ Modifier 67 by Momentive is 1, 4-butanediol diglycidyl ether. Acts primarily as a reactive diluent or viscosity reducer. It is compatible with bisphenol based epoxy resins, peroxidized... view more
Applications
  • Adhesives>Reactive systems>Solvent based
  • Polymers>Epoxies (EP)
  • Polymers>Polyolefins
  • Buildings & constructions
  • ...
It is the neopentyl glycol diglycidyl ether. Acts as viscosity reducing modifier. It is compatible with bisphenol based epoxy resins, peroxidized olefins, and higher functionality epoxy resins. It... view more
Applications
  • Adhesives
  • Polymers>Epoxies (EP)
  • Polymers>Polyolefins
  • Buildings & constructions
  • ...
Thiocarboxylate functional silane. Used as a coupling agent. Facilitates high temperature mixing without causing viscosity increase or premature vulcanization. Gives good silica dispersion and... view more
Back to Top