Bluesil™ TCS 7770 XL & C by Elkem Silicones is a two-component heat curing silicone polymer (50 parts Bluesil™ TCS 7770 XL and 50 parts Bluesil™ TCS 7770 C). Offers good adhesion on silicone coated... view more

CAF® 33 by Elkem Silicones is a non-flowing, black, white translucent, room temperature curing silicone elastomer. Exhibits high temperature resistance, heat stability, good dielectric properties... view more

CAF® 36 PEX by Elkem Silicones is a non-flowing, one-component room temperature vulcanizing silicone elastomer. Exhibits high heat stability (upto 350°C), water & humidity resistance, high... view more

EMERY® E 6401 by Emery Oleochemicals is a bio-based, fatty acid ester for use in mastics, adhesives and sealants. It possesses low color, good color stability, low odor and good biodegradability. It... view more

EMERY® E 6401 by Emery Oleochemicals is a bio-based, fatty acid ester-based, solvent, plasticizer or viscosity modifier. It possesses low color, good color stability, low odor and good... view more

EN-PRENE 611 by Enchuan is a styrene butadiene styrene thermoplastic elastomer. Suitable for adhesives and sealant applications. Provides strength, tackiness and elasticity. Due to the special... view more

EN-PRENE 655 Clear by Enchuan is a styrene butadiene styrene thermoplastic elastomer. Used in adhesives and sealant applications. Offers strength, tackiness and elasticity. It is an excellent rubber... view more

EN-PRENE 701 by Enchuan is a styrene butadiene styrene thermoplastic elastomer. Recommended for adhesives and sealant applications. Offers strength, tackiness and elasticity. Due to the special... view more

HY 40 by Ergon is hydrotreated naphthenic-based mineral oil. It has very low aromatic content and excellent solvency. It shows excellent color with resistance to discoloration by heat or ultraviolet... view more

HY P40 by Ergon is hydrotreated mineral oil. It shows excellent color with resistance to discoloration by heat or ultraviolet light. It has very low aromatic content and excellent solvency. HY P40... view more

HY P43 by Ergon is severely hydrotreated mineral oil. It has very low aromatic content, excellent solvency and very good color with resistance to discoloration by heat or ultraviolet light. HY P43... view more

HyPrene 100 by Ergon is a hydrotreated naphthenic process oil. Provides low pour point, low odor, excellent color and good solvency. Suitable for use in adhesives and sealants. It is insoluble in... view more

HyPrene 100E by Ergon is a hydrotreated naphthenic process oil with good solvency. Exhibits low pour point, low odor and excellent color. Used for adhesives and sealants. Shows resistance to... view more

Essential™ R9010 by Essential Polymers is an aliphatic polyurethane dispersion for water-based adhesives. It imparts very good gloss and excellent bond strength. It passes three cycles of... view more

4,6-Bis(dodecylthiomethyl)-o-cresol. Acts as an effective thermo-oxidative stabilizer for adhesive materials especially suitable for hot melt, solvent and water borne adhesives, for block-copolymers... view more

2-(2'-Hydroxy-5'-t-octylphenyl)-benzotriazole. Acts as a highly efficient UV-absorber. Provides excellent initial color and relative low volatility. Used for molding, sheet, glazing materials for... view more

Mixture of Bis(1,2,2,6,6-pentamethyl-2,6,6-pentamethyl-4-piperidyl)sebacate. Acts as a highly efficient liquid hindered amine light stabilizer... view more

2-(2’-hydroxy-3’-s-butyl-5’-t-butyl-phenyl)-benzotriazole. Acts as a light stabilizer/UV absorber. It offers broad range UV absorption, low color, low volatility and excellent solubility. It is a... view more

2-(2’-hydroxy-5’-t-octylphenyl) benzotriazole. Acts as a light stabilizer/UV absorber. It offers broad range UV absorption, low color, low volatility and excellent solubility. It is a unique... view more

TEGOPAC® RD 1 by Evonik is a silane-modified polymer used to decrease viscosity of adhesives & sealant formulations. It acts as a cross-linker which releases ethanol during the curing process. It... view more

TEGOPAC® Bond 170 by Evonik is a silylated polymer used for producing neutral curing adhesives and sealants with PPG as the backbone polymer. Applications include liquid membranes (for roofing... view more

Polymer ST 48 by Evonik is a phthalate plasticizer-based, silane-terminated polymer. It offers a good handling viscosity and is therefore easy to apply manually. It exhibits excellent adhesion to... view more

TEGOPAC® Bond 150 by Evonik is a plasticizer-free & solvent-free silane-terminated polymer with PPG backbone. It exhibits combination of outstanding through-cure & in-depth cure, excellent elastic... view more

TEGOPAC® Bond 160 by Evonik is a silylated polymer used for producing neutral curing adhesives and sealants where low formulation viscosity or very high filler load is required. Applications include... view more