Maxemul™ 6112 by Croda is an anionic, co-polymerizable surfactant designed for use as a stabilizer in latex binders typically used in pressure-sensitive adhesives. It is reactive towards vinylic... view more

Maxemul™ 7201 by Croda is an oil soluble anionic surfactant and resin emulsifier for adhesives and sealants. It offers surface wetting, highly efficient emulsification and improved cycle times... view more

Pristerene™ 4963 by Croda is a non-polar, stearic acid. It shows compatibility with non-polar solvents and resins. This monomer also provides low foaming, absence of surface defects and ease of... view more

Pycal™ 94 by Croda is a non-phthalate, plasticizer for emulsion adhesives. It provides excellent water resistance, great adhesive strength of plasticized film and good environmental & health... view more

Synperonic™ 13/6.5 by Croda is a nonionic surfactant, co-emulsifier with good wetting properties. This oil in water emulsifier provides excellent surface wetting, electrolyte stability, process... view more

EPICLON® 520 by DIC Corporation is a 100% reactive diluent, alkyl phenol mono glycidyl ether. It achieves very lower viscosity when mixed with liquid epoxy resins. EPICLON® 520 is used in concrete... view more

Bisphenol F type epoxy resin. It is a liquid resin having excellent workability and moldability due to low viscosity. Applications include concrete adhesives... view more

EPICLON® 830-S by DIC Corporation is Bisphenol-F based epoxy resin. It contains low hydrolyzable chlorine content. Exhibits excellent workability and moldability due to low viscosity. EPICLON® 830-S... view more

Bisphenol F type epoxy resin. It has low tendency for crystallization. Exhibits excellent workability and moldability due to low viscosity. Applications include concrete adhesives... view more

EPICLON® 840 by DIC Corporation is a low viscosity bisphenol A type (BPA) epoxy resin. Available in Asian countries. Applications of EPICLON® 840 by DIC Corporation include concrete adhesives... view more

Crosslinker® CX-300 by DSM is carbodiimide. Acts as a crosslinking agent. Offers bond strength, broad substrate adhesion, performance improvement, heat resistance and ice water resistance. Used in... view more

Haloflex™ H-202 by DSM is vinyl acrylic copolymer latex. It is a water-borne emulsion. Haloflex™ H-202 exhibits low moisture vapor transmission, bond strength, water resistance and an excellent... view more

NeoPac™ E-850 by DSM is an aliphatic urethane acrylic copolymer system. It is a formaldehyde-free resin. Offers bond strength, heat resistance, water resistance, activation temperature and broad... view more

Butyl Acrylate, 15 ppm MEHQ by Dow is used for copolymer-based adhesives. Offers flexibility, weatherability, internal plasticization, adhesion, range of hardness and resistance to abrasion as well as oil or... view more

Methyl Methacrylate, 15 ppm AO-30 by Dow offers hardness and flexibility. It also exhibits clarity, color compatibility, toughness, internal plasticization and weatherability. Methyl Methacrylate... view more

Methylene Chloride Technical E is used as a solvent in adhesives. Methylene Chloride Technical E offers high purity, high quality, non-flammability and volatility... view more

Methylene Chloride Technical Grade by Dow is used as a solvent chlorinated in adhesives. It possesses non-flammability and volatility... view more

NEU-TRI™ by Dow is a highly stabilized trichloroethylene-based solvent. It is used in adhesives. NEU-TRI™ offers benefits such as no flash point, easily recycled and highly stable in the presence of... view more

Modified ethylene-vinyl acetate copolymer. Used as a sealing layer for lidding applications. Offers cohesive type peel seal. Provides interfacial peel seals in HDPE, LDPE and low% EVA films. Also... view more

Modified ethylene-vinyl acetate copolymer. Used as a sealing layer for lidding applications. Offers low temperature heat seal initiation and easy peel characteristics to a variety of substrates... view more

Modified ethylene-methyl acrylate. Offers high thermal process stability, good clarity and low seal initiation. Used as a sealing layer for lidding applications. Provides peelable seals over a broad... view more

Modified ethylene-methyl acrylate copolymer. Offers low seal initiation, high burst strength and filament-free die cutting. Used as a sealing layer for lidding applications. Provides peelable seals... view more

Modified ethylene-vinyl acrylate. Offers low seal initiation, high burst strength, wide process window and filament-free die cutting. It contains a slip additive package. Used as a sealing layer for... view more

Eastman Optifilm™ Enhancer 300 by Eastman is a readily biodegradable, efficient, low odor, low toxicity, LVP-VOC, Non-HAP, Non-SARA, excellent retarder solvent & coalescent. It shows broad compatibility, easy... view more

Eastman Optifilm™ Enhancer 400 by Eastman is a readily biodegradable, efficient, low odor, low toxicity, LVP-VOC, non-HAP, non-yellowing, non-SARA, excellent retarder solvent & coalescent. It is a low odor... view more

Eastman™ 2-Ethylhexanol by Eastman is a biodegradable, versatile solvent that features excellent reactivity as a chemical intermediate. It offers defoaming, wetting, and dispersing characteristics. It... view more

Eastman™ Butyl Acetate by Eastman is a readily biodegradable, medium boiling ester solvent. It offers good solvent activity, high electrical resistance and low MIR value, surface tension and water solubility... view more

Eastman™ DB by Eastman is a readily biodegradable, solvent & efficient coalescent. It shows good coupling efficiency, solvent activity, high blush resistance & dilution ratio. It exhibits slow... view more

Adherant 1051 by Elementis acts as an adhesion promoter. It improves adhesion of organic resins to inorganic surfaces. It is designed for adhesive and sealants applications. Suitable for glass... view more

BENTONE® MA by Elementis is a purified hectorite clay-based rheological modifier for adhesive applications. Imparts thixotropy and good anti-settling properties to water-borne systems. Provides... view more

DAPRO® DF 21 by Elementis is a blend of hydrophobic silica, emulsifiers and mineral oil. Acts as a defoamer readily dispersible in water. Suitable for water-borne adhesives. Typically used at... view more

DUMACIL® 402 FGK by Elementis is a defoamer based on micro-fine silica treated with an organic silicone compound. The resultant hydrophobic silica is extremely water repellent and easily dispersed in... view more

Defom W-080 by Elementis is a waterborne defoamer based on mixture of mineral oil and fatty amide derivatives. It shows excellent antifoaming, defoaming and compatibility. It is slightly dispersing... view more