OK
The Universal Selection Source:
Adhesives Ingredients
Industry News

Aremco's Ceramacast™ 645N Now Used for High Temp Heaters

Published on 2010-10-11. Author : SpecialChem

Aremco's Ceramacast™ 645N is a fused silica based ceramic compound ideal for encapsulating small ceramic and metal housings used in a variety of high temperature devices such as heaters, flow meters, and pressure and temperature sensors to 3000 °F (1650 °C). Key attributes include excellent bonding to ceramics and metals, ultra low thermal conductivity, high dielectric strength of 300 volts per mil, high compressive strength of 7,000 psi, and exceptional chemical resistance.

CERAMACASTâ„¢ 645N NOW USED FOR HIGH TEMP HEATERS

Ceramacast™ 645N is a simple to use compound. It is provided in a powder form and is mixed in a ratio of 100 parts powder to 18-20 parts water. The mixture sets at room temperature in less than 8 hours, then fully cures at 200 °F and 250 °F for 2-4 hours, respectively. The shrinkage rate when fired to 1000 °F is less than 0.3%.

Ceramacast™ 645N is an environmentally friendly product that contains no asbestos or volatile organic compounds. It can be applied easily by syringe, squeeze bottle or automatic dispensing equipment. It is available from stock in quart, gallon and 5 gallon containers.

About Aremco

Aremco's advanced materials division is a leader in the development and production of technical ceramics, adhesives, coatings, sealants and potting compounds for applications to 3200°F. These materials are used throughout industry in the design of sensors, electrical components and analytical instruments, as well as the maintenance and repair of high temperature process equipment.

Source: Aremco


Improve your performance with water soluble epoxy compounds
Channel Alerts

Receive weekly digests on hot topics

Back to Top