OK
The Universal Selection Source:
Adhesives Ingredients
Product News

Master Bond Unveils MB250NT, a One Part Cyanoacrylate for Disposable/Reusable Medical Devices

Published on 2014-08-27. Author : SpecialChem

Master Bond MB250NT is widely used for a variety of applications ranging from repair to high speed production for disposable/reusable medical devices and passes ISO 10993-5 testing requirements. It also resists EtO and gamma sterilization processes.

This single component ethyl cyanoacrylate cures rapidly depending upon the atmospheric humidity—the higher the level, the faster the rate of cure. There is no mixing or heating required for curing. Since the cure is usually fast, only minimal contact pressure is required for bonding. MB250NT will typically set up within 10-40 seconds. It has a low viscosity of 100-110 cps.

Featuring high tensile laps shear strength values, MB250NT bonds well to a variety of substrates especially metals, composites, most plastics and rubbers. The service temperature range for this system is -60°F to +250°F. It has a shelf life of about 6 months in its original, unopened containers.

About Master Bond

Master Bond Inc. formulates the highest quality products and offers unmatched technical advice and customer support. Its product line consists of advanced adhesives, sealants, coatings, potting/encapsulation compounds and impregnation resins. Each compound is designed to meet specific application needs and requirements. Master Bond manufactures over 3,000 grades of specially designed formulations. The company offers replacements for competitors' discontinued products.

Source: Master Bond


FEICA 2018 European Adhesive and Sealant Conference and EXPO
Back to Top