OK
The Universal Selection Source:
Adhesives Ingredients
Product News

New One-component Epoxy for Die Attach Applications by Master Bond

Published on 2017-08-30. Author : SpecialChem

High Temperature Resistant, NASA Low Outgassing Approved Epoxy for Die Attach Applications
Formulated for die attach applications, Master Bond EP17HTDA-1 is a one-component epoxy that can also be used for bonding and sealing.

Rohit Ramnath, senior product engineer, said:

“EP17HTDA-1 has the ideal viscosity and flow for die attach applications. It has a high glass transition temperature (Tg) and also offers excellent electrical insulation properties, even at elevated temperatures and low exotherm upon curing.” This system features an excellent die shear strength of 24-27 kg-f and can be used in a typical die size ranging from 4-400 mm2.

Properties of EP17HTDA-1


  • EP17HTDA-1 has exceptional temperature resistance with a service temperature range of -80°F to +600°F [-62°C to +316°C] and a Tg of 195-205°C. 
  • This compound boasts thermal conductivity of 9-10 BTU•in/ft2•hr•°F [1.30-1.44 W/(m·K)].
  • It withstands a variety of chemicals including acids, bases, salts, fuels, oils and many solvents.

As a one part system, EP17HTDA-1 does not require any mixing for use and is curable in the temperature range of 300-350°F in short durations. It bonds well to a wide variety of substrates, such as metals, ceramics, plastics and composites. Upon curing, it delivers a tensile lap shear strength of 2,400-2,600 psi and a tensile strength of 9,000-10,000 psi. It also has minimal shrinkage upon curing.

Passes NASA Low Outgassing Testing


While EP17HTDA-1 is well suited for electronic and related applications, it can also be used in vacuum situations as it passes NASA low outgassing testing. This epoxy is available for use in 10 cc and 30 cc syringes and has a shelf life of 3-6 months when stored at 40-50°F.

PS: If you liked this News, you might enjoy our Adhesives Product Newsletter. All the Product News delivered once a week right to your inbox. Sign up here!


Source: Master Bond
Be the first to comment on "New One-component Epoxy for Die Attach Applications by Master Bond"

Leave a comment





Your email address and name will not be published submitting a comment or rating implies your acceptance to SpecialChem Terms & Conditions
Channel Alerts

Receive weekly digests on hot topics

Back to Top