3M™ Boron Nitride Cooling Filler Platelets CFP 006 by 3M is powder of highly crystalline single platelets. It is lightweight and offers high reflectivity & electrical insulation. It offers excellent... view more

3M™ Boron Nitride Cooling Filler Platelets CFP 0075 by 3M is a lightweight, highly crystalline single platelets of boron nitride. Recommended for thermal management in advanced polymers. It offers... view more

3M™ Boron Nitride Cooling Filler Platelets CFP 007HS by 3M is powder of highly crystalline single platelets. It is lightweight and offers highest reflectivity and increased in-plane thermal... view more

3M™ Boron Nitride Cooling Filler Platelets CFP 009 by 3M is powder of highly crystalline single platelets. Exhibits low density, temperature stability, low loss factor and chemical resistance. It is... view more

3M™ Boron Nitride Cooling Filler Platelets CFP 012 by 3M is a lightweight, highly crystalline single platelets of boron nitride. It offers high reflectivity & electrical insulation. Exhibits low... view more

Highly efficient, hindered phenolic primary antioxidant. Used in adhesives. Reacts efficiently with peroxy radicals. Offers high processing and long-term heat stabilization, low volatility, high... view more

Alvinox FB by 3V is a sterically hindered phenolic based grade. Acts as an anti-oxidant. It reacts efficiently with peroxy radicals, thus slowing down the chain reaction process that facilitates... view more

Alvinox P by 3V is a phenol based grade. Acts as an anti-oxidant. It decomposes hydroperoxide and provides long-term oxidative degradation in combination with anti-oxidants (hindered phenols and/or... view more

Resicure™ 2-MI by A&C Catalysts is 2-methyl imidazole. It acts as a sole curing agent or as a dicy and anhydride cure accelerator in epoxy resin-based formulations. It offers high chemical... view more

Dicyamdiamide. It acts as a curing agent. It appears as white to off-white powder. It is one of the finer of several pulverized grades of dicyandiamide containing more than 1% fumed silica as a flow... view more

Dicyamdiamide. It acts as curing agent. It appears as white to off-white powder. It is one of the finer of several pulverized grades of dicyandiamide containing more than 1% fumed silica as a flow... view more

Technicure® DCMU by A&C Catalysts is a 3-(3,4-dichlorophenyl)-1,1-dimethylurea, is a substituted urea. Technicure® DCMU is a dicyandiamide (DICY) accelerator. Provides good formulation shelf... view more

Technicure® DU-200M by A&C Catalysts is a [1,1’- (4-methyl-m-phenylene)bis-(3,3-dimethyl)] urea, is a substituted urea. Technicure™ DU-200M is a dicyandiamide (DICY) accelerator. Provides good... view more