TONE™ 1241 Polyol by Dow is a high purity, low-viscosity, linear polycaprolactone polyol. It possesses low melt viscosity, low color, high purity, exact functionality and long pot life. It offers... view more

TONE™ 1278 Polyol by Dow is a high purity, low-viscosity, colorless, linear polycaprolactone polyol. It is used in thermoplastic urethane contact- & hot melt adhesives, and in sealants. TONE™ 1278... view more

TONE™ 2221 Polyol by Dow is a high purity, low-viscosity, linear polycaprolactone polyol. It possesses low melt viscosity, low color, high purity, exact functionality, long pot life and good... view more

Calprene® 411 by Dynasol is 70/30 butadiene/styrene thermoplastic copolymer, polymerized in solution. It exhibits a radial structure and is available as a porous crumb. Calprene® 411 is recommended... view more

Solprene® 1205 by Dynasol is a gel-free, linear random-block styrene/butadiene copolymer. It contains a non-staining antioxidant system. It is an excellent modifier for asphalt, formulations of... view more

Calprene® H6110 by Dynasol is 70/30 ethylene-butylene/styrene thermoplastic copolymer, polymerized in solution. It has a linear structure with excellent ozone resistance. Calprene® H6110 is... view more

Calprene® 501 by Dynasol is a linear 69/31 butadiene/styrene thermoplastic copolymer, polymerized in solution. It provides high porosity and easy dispersion. Calprene® 501 is suitable for use in... view more

Solprene® 1217 by Dynasol is a gel- & BHT/TNPP-free, linear random-block styrene-butadiene copolymer with total content of 25% of styrene and 17.5% of block polystyrene. This grade exhibits... view more

Finntalc M15 by Elementis is floated, medium sized, laminar talc (Mg-silicate). It is recommended for adhesives and polyester putties... view more

Finntalc M30 by Elementis is floated, coarse, laminar talc (Mg-silicate). It is recommended for adhesives and polyester putties... view more

Finntalc M40 by Elementis is floated, coarse, double air classified, laminar talc (Mg-silicate). It shows low oil absorption. It is recommended for adhesives and polyester putties... view more

Finntalc M50 by Elementis is floated, very coarse, double air classified, laminar talc (Mg-silicate). It shows low oil absorption. Finntalc M50 is recommended for adhesives and polyester putties... view more

Finntalc M65 by Elementis is talc (Mg-silicate). It is recommended for adhesives and polyester putties... view more

4,6-Bis(dodecylthiomethyl)-o-cresol. Acts as an effective thermo-oxidative stabilizer for adhesive materials especially suitable for hot melt, solvent and water borne adhesives, for block-copolymers... view more

AEROSIL® 255 by Evonik is hydrophilic fumed silica. It exhibits rheology and thixotropy control of liquid systems, binders, polymers etc. It provides improvement of free flow and anti-caking... view more

DYNACOLL® 7110 by Evonik is saturated copolyester. It is used in moisture curable hot melt adhesives and sealants. It is suitable for automotive, wood-working, bookbinding, packaging, textile and... view more

DYNACOLL® 7111 by Evonik is a saturated polyester. It shortens open time and increases initial strength, melt viscosity, and adhesion to polar substrates. DYNACOLL® 7111 is used in hot melt... view more

DYNACOLL® 7130 by Evonik is a linear, saturated, amorphous copolyester. It is used in moisture curable hot melt adhesives and sealants. It is suitable for automotive, wood-working, bookbinding... view more

DYNACOLL® 7131 by Evonik is an amorphous, saturated copolyester. It is used in moisture curable hot melt adhesives and sealants. It is suitable for automotive, wood-working, bookbinding, packaging... view more