ECO Brij™ S721 by Croda is a 100% bio-based, high HLB, non-ionic surfactant. It is produced from naturally occurring straight chain stearyl alcohol. This additive is also used as a versatile... view more

ECO Tween™ 21 by Croda is a 100% bio-based, easy to handle, non-ionic surfactant, dispersing-, wetting agent. It is used as a versatile co-emulsifier for W/O or O/W emulsions. It also acts as a... view more

Hypermer™ PS3 by Croda acts as a polymeric surfactant as well as dispersing agent. It is used for organic as well as inorganic particles in medium polarity liquids, polyacrylate oligomers, polyester... view more

Synperonic™ PE/F127 FLAKES by Croda is ethoxylated polypropylene oxide-based dispersant for superior colloidal stability. It acts as a polymeric o/w emulsifier for polyester and epoxy resins... view more

Synperonic™ PE/L121 by Croda is ethoxylated polypropylene oxide-based, defoamer. This additive is used in polyether polyol building block with enhanced reactivity. It possesses good environmental &... view more

Eastman™ Butyl Acetate by Eastman is a readily biodegradable, medium boiling ester solvent. It offers good solvent activity, high electrical resistance and low MIR value, surface tension and water solubility... view more

Finntalc M15 by Elementis is floated, medium sized, laminar talc (Mg-silicate). It is recommended for adhesives and polyester putties... view more

Finntalc M30 by Elementis is floated, coarse, laminar talc (Mg-silicate). It is recommended for adhesives and polyester putties... view more

Finntalc M40 by Elementis is floated, coarse, double air classified, laminar talc (Mg-silicate). It shows low oil absorption. It is recommended for adhesives and polyester putties... view more

Finntalc M50 by Elementis is floated, very coarse, double air classified, laminar talc (Mg-silicate). It shows low oil absorption. Finntalc M50 is recommended for adhesives and polyester putties... view more

Finntalc M65 by Elementis is talc (Mg-silicate). It is recommended for adhesives and polyester putties... view more

Mixture of Bis(1,2,2,6,6-pentamethyl-2,6,6-pentamethyl-4-piperidyl)sebacate. Acts as a highly efficient liquid hindered amine light stabilizer... view more

5-Hexen-1-ol by Evonik acts as a cross-linker and modifier. The process steps include polymerization and it exhibits coloring. It is pre-registered with REACH. It is used in adhesives & sealants... view more

AEROSIL® 200 by Evonik works as anti-settling, thickening and anti-sagging agent. It is a hydrophilic fumed silica. It permits rheology and thixotropy control of liquid systems, binders, polymers... view more

AEROSIL® 255 by Evonik is hydrophilic fumed silica. It exhibits rheology and thixotropy control of liquid systems, binders, polymers etc. It provides improvement of free flow and anti-caking... view more

AEROSIL® 300 V by Evonik is a densified hydrophilic fumed silica grade. It acts as a rheology modifier. It exhibits optimal dispersion yielding best results in pronounced thickening and thixotropy... view more

AEROSIL® 380 by Evonik is a hydrophilic fumed silica. It is designed for adhesives and sealants. It permits rheology and thixotropy control of liquids, binders and polymers. AEROSIL® 380 provides... view more