Cardolite® NC-556S80 by Cardolite is phenalkamine. Used as curing agent for epoxy adhesives. Provides high solid formulations, rapid cures with a workable pot life, good acceptance to poorly... view more

Cardolite® NX-4901 by Cardolite is phenalkamine. Used as curing agent for epoxy adhesives. Suitable for high solid and solvent-free formulations. Offers rapid cure with a workable pot life, good... view more

Cardolite® NX-4903 by Cardolite is 100% solids, low viscosity and solvent-free phenalkamine. Used as curing agent in epoxy adhesives. Possesses very good penetration and adhesion to damp, wet or dry... view more

Cardolite® NX-4913 by Cardolite is 100% solids, low viscosity and solvent-free phenalkamine. Used as curing agent in epoxy adhesives and sealers for concrete. Possesses very good penetration and... view more

Amorphous Polyolefin by Synthomer. Eastoflex™ E1016 offers consistent quality, low odor, good heat and UV stability, good water and moisture resistance and low color. Used in adhesives for... view more

Eastoflex™ E1060 by Synthomer is an amorphous polyolefin (copolymer of propylene and ethylene) grade. It is inherently soft, tacky and flexible. Used in automotive, building and construction, film... view more

Eastoflex™ E1200 by Synthomer is an amorphous polyolefin (copolymer of propylene and ethylene) grade. Possesses inherent softness, tackiness and flexibility. Exhibits good water and moisture... view more

Amorphous Polyolefin (APO). Eastoflex™ E2030 by Synthomer offers consistent quality, low odor, good heat and UV stability, good water and moisture resistance and low color. Used in hot-melt... view more

Eastoflex™ M1014 is an amorphous polyolefin by Synthomer. Offers consistent quality, low odor, good heat and UV stability, good water and moisture resistance and low color. Used in hot-melt... view more

VINNOL® E 15/48 A by Wacker is hydroxyl-containing copolymer of 84 %wt vinyl chloride (VC) and 16 %wt of acrylic acid esters. It can be used in automotive and industrial adhesives. Offers good... view more

VINNOL® E 22/48 A by Wacker is a hydroxyl-containing copolymer of approx. 75 %wt vinyl chloride and 25 %wt carbon acid esters. It can be used as a reactant or co-binder in two-pack systems. It may... view more

Nipol® 35-5 by Zeon Chemical is butadiene and acrylonitrile copolymer. It possesses intermediate mooney viscosity. It provides very good physical properties and solvent resistance. Nipol® 35-5 used... view more