K-FLEX® 850P by LANXESS (previously Emerald Kalama Chemical) is a non-phthalate, plasticizer. It is a blend of dipropylene glycol- and diethylene glycol dibenzoate. It is similar in composition to... view more

K-FLEX® PG by LANXESS (previously Emerald Kalama Chemical) is a non-phthalate, low-VOC, propylene glycol dibenzoate plasticizer. It can achieve excellent performance and compatibility in waterborne... view more

Kalama® VITROFLEX® B by LANXESS (previously Emerald Kalama Chemical) is a non-phthalate, benzoate plasticizer based on innovative polymeric technology. It is specially designed for the B (catalyst)... view more

Humectant® GRB3 by Lubrizol is a solution of low molecular weight polyols. Acts as a humectant or desiccant. It is a non-HAPS, VOC free alternative to ethylene, propylene and butyl glycols... view more

Omnapel® 3158 by Omnova Solutions (Synthomer) is a hydrophobic acrylate copolymer. It offers fast penetration, low-temperature cure, UV resistance, and high-temperature stability. It improves the... view more

White mineral oil (100% by weight). It is a white colored liquid. Insoluble in water and soluble in oil & organic solvents. Suitable for hot-melt adhesives and caulk sealants. Meets FDA (U.S. Food... view more

Synthebond™ E 6787 by Synthomer is an aqueous lower VOC carboxylated styrene-acrylic emulsion polymer. It can be used as a binder for production of tile adhesives. It can also be used as a wet end... view more

Intercide® ABF-2 PPG by Valtris Specialty Chemicals is the preservative. It is used in PVC formulation. It provides protection against attack from a wide spectrum of fungi and bacteria. Suggested for use in polyurethane foam... view more

Intercide® ABF-5 PPG by Valtris Specialty Chemicals is the preservative. It is used in PVC formulation. It provides protection against attack from a wide spectrum of fungi and bacteria. Suggested for use in polyurethane foam... view more

Santicizer® Platinum P-1700 by Valtris Specialty Chemicals is a non-phthalate, fast fusing, highly permanent plasticizer. It is compatible in multiple polymer systems such as PVC, latex, polyurethane and polysulfide, offering... view more

Epoxidized polysulfide. Provides extended flexibility, and improved impact and thermal shock resistance. Used in sealants for concrete and steel... view more

Polysulphide polymer. Used for building sealants. Offers high viscosity and light brown colour. Can be used in combination with various fillers, plasticizers and special modifying additives... view more

EPIKOTE™ Resin 827 by Westlake Epoxy is a medium viscosity, liquid epoxy resin produced from bisphenol-A and epichlorohydrin. It contains no diluent. It provides good pigment wetting and good... view more

EPIKURE™ Curing Agent 8535-W-50 by Westlake Epoxy is a curing agent. It is a modified polyamidoamine adduct supplied at 50 percent solids in water, which in combination with liquid epoxy resins... view more

EPON™ Resin 826 by Westlake Epoxy is a low viscosity, light colored, liquid bisphenol-A based epoxy resin by Hexion. It can be crosslinked or hardened with a variety of curing agents. It produces... view more

EPON™ Resin 828 by Westlake Epoxy is an undiluted clear difunctional bisphenol-A/ epichlorohydrin derived epoxy resin. It provides very good mechanical, adhesive, dielectric and chemical resistance... view more

EPON™ Resin 862 by Westlake Epoxy is a low viscosity, liquid epoxy resin manufactured from epichlorohydrin and Bisphenol-F. It contains no diluents or modifiers. It may be used as the sole epoxy... view more