Chemguard S-550-100 by Chemguard is a 100% active short-chain perfluoro-based ethoxylated nonionic fluorosurfactant. Provides surface tensions as low as 20 dynes/cm in water at low concentrations and is also... view more

EPICLON® 850-CRP by DIC Corporation is a high purity, distilled bisphenol-A type (BPA) epoxy resin. Applications of EPICLON® 850-CRP include concrete adhesives... view more

EPICLON® EXA-830LVP by DIC Corporation is a high purity, low viscosity Bisphenol-F based epoxy resin. Exhibits excellent workability and moldability due to low viscosity. Applications of EPICLON®... view more

Bisphenol F type epoxy resin. It is a resin of high purity. Exhibits excellent workability and moldability due to low viscosity. Applications include concrete adhesives... view more

SYLVALITE™ RE 105XL by KRATON is a very light colored and stable rosin ester based tackifier with moderately high softening point. It provides good specific adhesion and broad compatibility... view more

SYLVARES™ TP 7042 by KRATON is a tackifier based on thermoplastic terpene phenolic resin. It provides superior adhesion and thermal stability. This high heat resistance resin has high terpene level... view more

KURARAY POVAL™ 20-98 LA by Kuraray is a polyvinyl alcohol (PVOH) with low ash content. It is water soluble and is manufactured by alcoholysis of polyvinyl acetate. Exhibits good penetration... view more

Blend of vegetable oils, alkoxylated compounds and hydrophobic silica in emulsion form. Acts as defoamer. It is sensitive to freezing and should be stored between 15 and 25 °C. It can be added at... view more

Aqueous emulsion of vegetable oils, polyethers and non ionic emulsifiers, APEO free. Acts as defoamer. It provides good control of foam even at low levels. Agitan® 6686 W should be stored in a cool... view more

AGITAN® DF 6120 by Munzing is an emulsion of mineral oil and non ionic surfactants, APEO free. Acts as defoamer. It is sensitive to freezing but for better handling it should be stored between 5 and 35... view more

SULFOROKAnol L170/1 by PCC Group is a mixture of suphated, ethoxylated (1-2.5 EO) alcohols (C12-14) and sodium salts present as colorless liquid/ paste. Acts as a base surfactant. Exhibits chemical... view more

SULFOROKAnol L270/1 by PCC Group is a mixture of suphated, ethoxylated (1-2.5) alcohols (C12-14) and sodium salts present as colorless liquid/ paste. Acts as a base surfactant. Exhibits chemical... view more

SULFOROKAnol L270/1A by PCC Group is a mixture of suphated, ethoxylated (1-2.5) alcohols (C12-14) and sodium salts present as colorless liquid/ paste. Acts as a base surfactant. Exhibits chemical... view more

Methyl Cellulose by Ronas Chemicals is used as a thickener in tile adhesives. It is an odorless, white or light gray pellet or fibril powder. The film formed is tough, flexible and transparent. It... view more

Acrylic co-polymer emulsion. It is a high solids polymer with fast drying properties. Saitack® 269 also has superior tack, adhesion and plasticizer resistance along with excellent water resistance... view more

High solids acrylic co-polymer emulsion. It is not classified as a hazardous product under DOT or OSHA regulations and does not contain any hazardous components at levels which have implications for... view more

Acrylic ester-methacrylic acid co-polymer emulsion. This acrylonitrile-containing anionic polymer is not classified as a hazardous product under DOT or OSHA regulations and does not contain any... view more

Acrylic co-polymer emulsion. It is not classified as a hazardous product under DOT or OSHA regulations and does not contain any hazardous components at levels which have implications for labeling... view more

Acrylic co-polymer emulsion. It is an APEO free product which is not classified as a hazardous product under DOT or OSHA regulations and does not contain any hazardous components at levels which... view more