Dynasylan® 1124 by Evonik acts as an adhesion promoter and surface modifier with excellent crosslinking properties. It is a secondary aminofunctional methoxy-silane possessing two symmetric silicon... view more

Dynasylan® 1189 by Evonik is a bifunctional silane. Acts as an adhesion promoter or as a surface modifier. Provides flexural strength, tensile strength, impact strength, modulus of elasticity... view more

Irganox® MD 1024 by BASF is a primary sterically hindered phenolic antioxidant. It provides unmatched extraction resistance and processing stabilization. It is used in adhesives and sealants. It is... view more

Tinuvin® 928 by BASF is an UV absorber of the hydroxyphenyl benzotriazole class. Used in hotmelt, reactive, solvent-based, radiation curing & construction adhesives and sealants. Exhibits... view more

A-C® 597P by Honeywell is a propylene maleic anhydride copolymer grade. Used in sealants, hot-melt, metallocene ethylene octene (MEO) copolymers and amorphous poly-olefin (APAO)-based adhesives... view more

A-C® 925P by Honeywell is a propylene maleic anhydride copolymer grade. Used in sealants, hot melt, metallocene ethylene octene (MEO) copolymers and amorphous poly-olefin (APAO)-based adhesives... view more

HYNOWA™ HV-1300 by Hynowa Hydrocarbon Resin is a water-white hydrogenated DCPD hydrocarbon resin. It acts as a tackifier. It is suitable for EVA, SIS, SEBS block copolymers, metallocene polyolefins... view more

SYLVARES™ TP 2019 by KRATON is thermoplastic terpene phenolic resin. It is designed for tackifying hot-melt adhesives to provide superior adhesion and thermal stability properties. It contains high... view more

SYLVARES™ TP 7042 by KRATON is a tackifier based on thermoplastic terpene phenolic resin. It provides superior adhesion and thermal stability. This high heat resistance resin has high terpene level... view more

K-FLEX® 500 by LANXESS (previously Emerald Kalama Chemical) is a non-phthalate, general-purpose, polar plasticizer. It is a blend of di-propylene glycol dibenzoate and diethylene glycol dibenzoate... view more

K-FLEX® 850P by LANXESS (previously Emerald Kalama Chemical) is a non-phthalate, plasticizer. It is a blend of dipropylene glycol- and diethylene glycol dibenzoate. It is similar in composition to... view more

K-FLEX® 850S by LANXESS (previously Emerald Kalama Chemical) is non-phthalate, low-VOC plasticizer. It is a blend of dipropylene glycol dibenzoate and diethylene glycol dibenzoate. It achieves... view more

K-FLEX® 975P by LANXESS (previously Emerald Kalama Chemical) is a non-phthalate, low vapor pressure-VOC plasticizer. It is a blend of diethylene glycol-, dipropylene glycol- and propylene glycol... view more

K-FLEX® DP by LANXESS (previously Emerald Kalama Chemical) is a non-phthalate, plasticizer. It is dipropylene glycol dibenzoate. It is the most versatile polar, high solvating grade. It offers good... view more

Pentalyn™ H-E is a medium hard, pale, thermoplastic resin designed primarily as a tackifying resin for various types of polymer- and elastomer-based adhesives. Possesses very good resistance to... view more

PE24JA by The R.J. Marshall Company is a low-cost polyethylene fiber. It has high reinforcement strength (high tensile), improved viscosity control and rapid dispersibility. It shows excellent... view more

PE26JA by The R.J. Marshall Company is a low-cost polyethylene fiber. It has high reinforcement strength (high tensile), improved viscosity control and rapid dispersibility. It shows excellent... view more