Tinuvin® 770 is bis(2,2,6,6,-tetramethyl-4-piperidyl) sebaceate by BASF which funcions as hindered amine light stabilizer (HALS). Used in hotmelt, reactive, solvent-based and radiation curing... view more

Thermoplastic, low molecular weight aliphatic hydrocarbon resin. It is a tackifier. It is obtained from petroleum-derived monomers. It possesses good thermal stability, low wax cloud point and low... view more

Thermoplastic aliphatic resin. It acts as tackifier. It is a low molecular weight, slightly yellow aliphatic resin having good thermal stability and good compatibility with APAO, natural rubbers... view more

Thermoplastic C5 hydrocarbon resin. It acts as tackifier. It is a low molecular weight, light yellow aromatic resin having good heat stability and good compatibility with natural rubbers, SIS and... view more

Calcium Carbonate 5514 by Brenntag Specialties (EMEA) is ground limestone. Used as a filler in wall tile adhesives, joint and caulking compounds and sealants. Calcium Carbonate 5514 offers increased opacity... view more

Ground limestone. Used as a filler in wall tile adhesives, joint and caulking compounds and sealants. Offers increased opacity... view more

Ground limestone. Used as a filler in wall tile adhesives, joint and caulking compounds and sealants. Offers increased opacity... view more

Modified gum rosin polyol ester. It is a tackifier which is made from special refined gum rosin by a series of advanced processes of partial hydrogenation, esterification and stabilization. Exhibits... view more

Modified gum rosin polyol ester. It is a tackifier which is made from special refined gum rosin by a series of advanced processes of partial hydrogenation, esterification and stabilization. Exhibits... view more

Modified gum rosin polyol ester. It is a tackifier which is made from special refined gum rosin by a series of advanced processes of partial hydrogenation, esterification and stabilization. Exhibits... view more

Rhenogran® CLD-80 by Lanxess is a non-staining sulphur donor for the vulcanization of natural and synthetic rubbers with additional thiuram accelerator for nitrile rubber seals. It is a blend of 80%... view more

Rhenogran® DPTT-70 by Lanxess is an ultra accelerator for vulcanization of natural and synthetic rubbers. It provides heat resistance in rubber seals, very rapid and scorch-safe vulcanization and... view more

Rhenogran® Diuron-80 by Lanxess is a crosslinking agent in oil-resistant seals based on acrylate rubber for use in vehicles and engineering. It is a blend of N'-(3,4-dichloro-phenyl)-N,N-dimethyl... view more

Rhenogran® ETU-70/ECO by Lanxess is a crosslinking agent in technical rubber sealings based on epichlorhydrin polymer (CO) and epichlorhydrin-ethylenoxide-copolymere (ECO). It is a blend of... view more

Rhenogran® IS 60-75 by Lanxess is a vulcanizing agent in natural and synthetic rubber compounds for technical seals. It is a blend of 40% soluble, 60% insoluble sulphur, elastomer binder and dusting... view more

Refined C5 aliphatic hydrocarbon resin. Acts as a tackifier. PRS® -A1085 (First Grade) is light colored as well low volatility material. It has an excellent compatibility with a wide variety of... view more

Refined C5 aliphatic hydrocarbon resin. Acts as a tackifier. PRS® -A1085 (Qualified Grade) is light colored as well low volatility material. It has an excellent compatibility with a wide variety of... view more