Adherant 1051 by Elementis acts as an adhesion promoter. It improves adhesion of organic resins to inorganic surfaces. It is designed for adhesive and sealants applications. Suitable for glass... view more

BENTONE® MA by Elementis is a purified hectorite clay-based rheological modifier for adhesive applications. Imparts thixotropy and good anti-settling properties to water-borne systems. Provides... view more

Finntalc M15 by Elementis is floated, medium sized, laminar talc (Mg-silicate). It is recommended for adhesives and polyester putties... view more

Finntalc M30 by Elementis is floated, coarse, laminar talc (Mg-silicate). It is recommended for adhesives and polyester putties... view more

Finntalc M40 by Elementis is floated, coarse, double air classified, laminar talc (Mg-silicate). It shows low oil absorption. It is recommended for adhesives and polyester putties... view more

Bluesil™ ESA 6024 A & B by Elkem Silicones is a pourable, two component silicone rubber that cures at room temperature by a polyaddition reaction, to a very soft and translucent silicone gel... view more

Bluesil™ ESA 6120 QC A & B by Elkem Silicones is a pourable two components silicone rubber that cures quickly at room temperature by a polyaddition reaction, to a very soft and clear silicone gel... view more

Bluesil™ ESA 7244 A & B by Elkem Silicones is a liquid two-component, polyaddition heat curing silicone elastomer. It is a solvent-free, self-leveling grade designed for adhesive and sealant... view more

Bluesil™ ESA 7250 A & B by Elkem Silicones is a two component, optically clear, high strength silicone elastomer. Cures by a polyaddition reaction at room temperature. Curing can be accelerated by... view more

Bluesil™ ESA 7252 A & B by Elkem Silicones is a low viscosity , non-corrosive, two-component silicone elastomer which cures at room temperature by a polyaddition reaction. It is supplied in the form... view more