DPGDA-D by allnex is dipropylene glycol diacrylate. It is a clear liquid. It exhibits thermal stability, good flexibility, good cure response and good pigment wetting. It also exhibits... view more

EBECRYL® 1290 by allnex is a hexafunctional, light color, aliphatic urethane acrylate. It is a zero VOC, organo tin-, BPA- Bis phenol A- and solvent free grade. Exhibits very fast cure response when... view more

EBECRYL® 130 by allnex is a low viscosity, light color, aliphatic diacrylate. It is a cyclic, zero VOC, tin-, BPA- Bis phenol A- and solvent free grade. Exhibits good compatibility, long potlife... view more

EBECRYL® 230 by allnex is an aliphatic, light color urethane diacrylate. It is a zero VOC, BPA- Bis phenol A- and solvent free grade. Exhibits low viscosity, long potlife, faster cycle time, low... view more

EBECRYL® 3703 by allnex is amine modified bisphenol A epoxy diacrylate. It is a zero VOC, tin- and solvent free grade. Exhibits exceptionally fast cure via exposure to ultraviolet light (UV). Films... view more

EBECRYL® 745 by allnex is a zero VOC acrylic polymer. It is a BPA- Bis phenol A- and solvent free grade. It is used as the primary or modifying oligomer in ultraviolet light (UV) or electron beam... view more

EBECRYL® 83 by allnex is amine modified polyether acrylate. It is a zero VOC, BPA- Bis phenol A- and solvent free grade. Exhibits good compatibility, long potlife, faster cycle time and low... view more

Modified polyester acrylate. It exhibits resistance to yellowing upon cure & over its lifetime and it has low viscosity which provides latitude to achieve low viscosity formulations, which are... view more

High viscosity, aromatic urethane acrylate. It exhibits good curing properties under ultraviolet light (UV) after the addition of photoinitiators. Cured films show very good flexibility, electrical... view more

High viscosity, aromatic urethane acrylate. Exhibits good curing properties under ultraviolet light (UV) after the addition of photoinitiators. It shows very good chemical resistance, very good... view more

Polyol derived from castor oil is solvent-free and supplied in liquid form. It can be thinned with esters, ketones, ether esters and aromatic hydrocarbons, has good compatibility with other... view more

Setathane® D 1150 by allnex is a polyol derived from castor oil is solvent-free and supplied in liquid form. It can be thinned with esters, ketones, ether esters and aromatic hydrocarbons, has good... view more

Setathane® D 1155 by allnex is a polyol that is derived from castor oil is solvent-free and supplied in liquid form. Prolonged storage of a solution with low binder content may result in turbidity and... view more

Polyol derived from castor oil is pale-yellow and solvent-free supplied in liquid form. Offers high flexibility and good mechanical strength. It can be thinned with esters, ketones, ether esters and... view more

Polyol emulsion. It is a milky liquid product and contains approx. 10 % water. Over crosslinking of 50 % and more is usual. This allows a wide-ranging variation in flow and chemical resistance... view more

Aliphatic urethane acrylate solution in water. It has good resistance to yellowing, very good flexibility, moderate viscosity and exhibits good adhesion... view more

High viscosity, aliphatic urethane acrylate oligomer containing ~5% water. It provides good adhesion to a variety of wood types, along with good flexibility, resistance to yellowing, and resistance... view more