Dynol™ 810 by Evonik is a low foam superwetter/surfactant. It is a 100% active grade with no silicone and fluorine content. Contains no added APEs, HAPs or VOCs. It is completely suitable with water... view more

Dynol™ 960 by Evonik is a siloxane based surfactant. It acts as a superwetting agent. Contains no added hazardous air pollutants (HAPs), alkylphenol ethoxylates (APEs) and volatile organic compounds... view more

EnviroGem® AD01 by Evonik is a 100% active liquid with low VOC. It acts as a defoaming wetting agent based on gemini surfactant technology. It is HAP- and APE-free.It possesses fast knock-down... view more

Synthetic Resin 1201 by Evonik is a hydrogenated acetophenone formaldehyde condensation resin modified with urethane. Synthetic Resin 1201 is used in isocyanate-based reactive adhesives... view more

TEGO® Antifoam D 2345 by Evonik is a defoamer and deaerator used in adhesives. It is suitable for solvent-based systems and is based on silicone-free polymer solution. It does not influence the... view more

2-Isopropylthioxanthone. Acts as a highly efficient free radical type II photoinitiator. It is used to initiate the photopolymerization of chemically unsaturated prepolymers, e.g. acrylates, in... view more

(3-acryloxypropyl)trimethoxysilane inhibited with MEHQ. Used as coupling agent for epoxies and UV cure systems... view more

CR91179 by Guangdong HaoHui New Materials is a low odor modified epoxy acrylate resin. It exhibits fast curing speed, good flexibility, yellowing resistance, good adhesion and high cost performance. Used in UV nail... view more

Esacure TZM by IGM Resins is a liquid mixture of benzophenone and 4-methylbenzophenone based type II free radical photoinitiator. It offers high solubility and compatibility. It exhibits high... view more

Esacure TZT by IGM Resins is a liquid eutectic mixture of 2,4,6 trimethylbenzophenone and 4-methylbenzophenone based photoinitiator. It offers high reactivity, high solubility, compatibility, low... view more

Omnicat 432 by IGM Resins is a UV-photointiator based on the mixture of triarylsulfonium hexafluorophosphate salts and propylene carbonate. It offers through- & surface care. It is recommended for... view more

Omnimer ACMO by IGM Resins is a monofunctional, UV reactive diluent for UV and EB radiation curable formulations. It exhibits excellent heat resistance, low viscosity and low odor. It shows good... view more

Omnipol 910 by IGM Resins is a polymeric Type I photoinitiator. It is based on aminoalkylphenone photoinitiator class. It shows strong UV Chromophore in the UV-B region and exhibits low odor. It is... view more