Tinuvin® 152 by BASF is a high performance hindered amine light stabilizer (HALS). Tinuvin® 152 is used in hot melt, reactive, solvent-based and radiation curing adhesives and sealants... view more

Tinuvin® 234 by BASF is a high molecular weight ultraviolet light absorber (UVA) of the hydroxy phenyl benzotriazole class. Possesses features such as low volatility, very good light absorbing... view more

Tinuvin® 326 by BASF is an UV absorber of the hydroxyphenylbenzotriazole class. Offers low volatility at high temperatures, high resistance to thermal degradation and light stability to plastics... view more

Tinuvin® 479 by BASF is hydroxyphenyl-triazine (HPT) UV absorber. Offers characteristics such as protection against gloss reduction, cracking, blistering, delamination and color change. Tinuvin® 479... view more

Tinuvin® 928 by BASF is an UV absorber of the hydroxyphenyl benzotriazole class. Used in hotmelt, reactive, solvent-based, radiation curing & construction adhesives and sealants. Exhibits... view more

Non-reactive, non-hygroscopic, magnesium oxide. Used as a thickener and an acid acceptor in adhesives. Offers compatibility with neoprene, hypalon, natural rubber, SBR, viton, butyl rubber... view more

Non-reactive, non-hygroscopic, magnesium oxide. Used as a thickener and an acid acceptor in adhesives. Offers compatibility with neoprene, hypalon, natural rubber, SBR, viton, butyl rubber... view more

Non-reactive, non-hygroscopic, magnesium oxide. Used as a thickener and an acid acceptor in adhesives. Offers compatibility with neoprene, hypalon, natural rubber, SBR, viton, butyl rubber... view more

Chiguard® P by Chitec Technology is an ultraviolet (UV) light stabilizer. It absorbs photochemical energy emitted by UV light and dissipates it as thermal energy at a rate and in an amount that is harmless... view more

HALLBOND® RX-13946 D by Hallstar acts as an adhesion promoter. It provides equal or better adhesion as compared to standard adhesion systems. It is compatible with EPDM, natural rubber, nitrile, chlorinated... view more

Trially cyanurate. Acts as an effective co-agent or crosslinking agent for the peroxide cure. It gives higher yield on usage. Compatible with chlorinated rubber, EPDM, natural rubber, epoxy... view more

Genitron® ACR by Lanxess is a chemical blowing and foaming agent. It is recommended for PVC and LDPE, natural and synthetic rubbers, such as SBR, EPDM, NBR, CR, PVC/NBR blends in car door sealing... view more

Genitron® OB by Lanxess is a chemical blowing agent for light-colored rubbers and plastics for rubber sealings. It is non-staining, non-discoloring, low toxic, 4,4’-oxy-bis(benzene-sulphohydrazide)... view more

Genitron® RFG by Lanxess is a preparation based on azodicarbonic acid diamide and p-toluene sulphohydrazide. Used as a chemical blowing agent for car door sealing strips. Genitron® RFG provides high... view more

Porofor® ADC/L-C2 by Lanxess is a low-dust, azodicarbonic acid diamide preparation-based chemical blowing agent for thermoplastic materials such as rigid and modified PVC, PS, ABS, PE, PP, EVA and... view more

Porofor® ADC/S-C2 by Lanxess is a low-dust, azodicarbonic acid diamide preparation-based chemical blowing agent. Offers easy dispersion and increased production efficiency. Porofor® ADC/S-C2 is... view more

2, 2’-Methylenebis (4-methyl-6-tert-butylphenol). Acts as a sterically hindered phenol antioxidant and thermal stabilizer. It provides effective stabilization in ABS, EVA, polypropylene and... view more