Surfynol® MD-20 by Evonik acts as a defoamer. It is an organic molecular defoamer based on gemini surfactant technology. It provides a combination of foam control and dynamic wetting.It is a... view more

Surfynol® OP-340 by Evonik is a surfactant designed to be compatible and perform well with the various acrylic resins. It provides good wetting, elimination of foam problems, reduced water... view more

Polyester adipate. Acts as a polymeric plasticizer. It is highly efficient and very easy processing. Compatible with acrylic resins, nitrile, nitrocellulose, polymethyl methacrylate, polyvinyl... view more

Jeffamine® M-2095 Amine by Huntsman is polyethylene glycol (PEG)-based polyetheramine. It is a hydrophilic polyether monoamine of approximately 2000 molecular weight. Exhibits moderate viscosity... view more

Jeffamine® M-3085 Amine by Huntsman is a hydrophilic polyether monoamine of approximately 3000 molecular weight with a PO/EO mole ratio of about 8/58. Exhibits moderate viscosity and low vapor... view more

Esacure 1001 M by IGM Resins is a difunctional Type II photoinitiator of the ketosulphone class. It is used to initiate radical polymerization of unsaturated oligomers such as acrylates after UV... view more

Omnirad 184 by IGM Resins is a highly efficient, non-yellowing photoinitiator. It is used to initiate the photo-polymerization of chemically unsaturated prepolymers like acrylates, in combination with... view more

Omnirad 2100 by IGM Resins acts as a free-radical type I photoinitiator. It is a highly efficient liquid curing agent to initiate radical polymerization of acrylates and unsaturated polyesters after... view more

Omnirad 4MBZ Flakes by IGM Resins is an effective Type II photoinitiator. Used in combination with tertiary amine synergists to initiate radical polymerization of unsaturated oligomers such as acrylates after... view more

Omnirad 754 by IGM Resins is a liquid photo-initiator. It provides low residual odor, emission and yellowing after curing. It offers through and surface cure. It is suitable for clear and white... view more

K-FLEX® 500 by LANXESS (previously Emerald Kalama Chemical) is a non-phthalate, general-purpose, polar plasticizer. It is a blend of di-propylene glycol dibenzoate and diethylene glycol dibenzoate... view more

K-FLEX® 850P by LANXESS (previously Emerald Kalama Chemical) is a non-phthalate, plasticizer. It is a blend of dipropylene glycol- and diethylene glycol dibenzoate. It is similar in composition to... view more

K-FLEX® 850S by LANXESS (previously Emerald Kalama Chemical) is non-phthalate, low-VOC plasticizer. It is a blend of dipropylene glycol dibenzoate and diethylene glycol dibenzoate. It achieves... view more

K-FLEX® 975P by LANXESS (previously Emerald Kalama Chemical) is a non-phthalate, low vapor pressure-VOC plasticizer. It is a blend of diethylene glycol-, dipropylene glycol- and propylene glycol... view more

K-FLEX® DP by LANXESS (previously Emerald Kalama Chemical) is a non-phthalate, plasticizer. It is dipropylene glycol dibenzoate. It is the most versatile polar, high solvating grade. It offers good... view more