Silcolease® Emulsion XL 969 by Elkem Silicones is silicone emulsion. Acts as a crosslinker for polyaddition and polycondensation emulsions in the Silcolease® range. Exhibits higher cured coating... view more

Silcolease® Poly 366 by Elkem Silicones is a solventless thermal silicone polymer. Exhibits a wide range of premium flat release over a broad range of peeling speeds with addition of release... view more

Essential™ R9010 by Essential Polymers is an aliphatic polyurethane dispersion for water-based adhesives. It imparts very good gloss and excellent bond strength. It passes three cycles of... view more

1,7-Octadiene by Evonik acts as a cross-linker for polyolefins (PE and PP) and as well as for a number of other polymers. It complies with REACH. It is used in adhesives & sealants... view more

AERODISP® W 1824 by Evonik is hydrophilic fumed silica. It acts as adhesion promotor. It is used in self adhesive labels, glass fibre, fireprotection, textile, photopaper and packaging paper. It... view more

Airase® 4655 Defoamer by Evonik is an organic oil-based defoamer. It does not contain added mineral oils, hazardous air pollutants (HAPs) or alkyl phenol ethoxylates (APEs). It is suitable for... view more

Airase® 5355 Defoamer by Evonik is a siloxane-based defoamer. It does not contain added mineral oils, hazardous air pollutants (HAPs) or alkyl phenol ethoxylates (APEs). It is suitable for low-VOC... view more

Airase® 5655 Defoamer by Evonik is a siloxane-based defoamer. It does not contain added mineral oils, hazardous air pollutants (HAPs) or alkyl phenol ethoxylates (APEs). It is suitable for low-VOC... view more

Escor™ AT 310 Blown by ExxonMobil Chemical is an acid terpolymer. It acts as an adhesion promoter and as heat seal layer... view more

Escor™ AT 310 Cast by ExxonMobil Chemical is an acid terpolymer. It acts as an adhesion promoter and as heat seal layer... view more

Escor™ AT 310 ExCo by ExxonMobil Chemical is an acid terpolymer. It acts as an adhesion promoter. It is used in demanding heat seals and shows very good adhesion properties. Escor™ AT 310 ExCo... view more

Escor™ AT 310 Molding by ExxonMobil Chemical is an ethylene acrylic acid copolymer resin. It acts as an adhesion promoter. It is used in heat-activated adhesive and sealant compounds. It possesses... view more

Escor™ AT 320 Blown by ExxonMobil Chemical is an ethylene methyl acrylate copolymer. It acts as an adhesion promoter and as a heat seal layer... view more