Laromer® HDDA by BASF is hexandiol diacrylate. It is an acrylic acid ester. This grade contains two polymerizable acrylic groups per molecule which enables it to form copolymers of acrylic or... view more

Laromer® TMPTA by BASF is trimethylolpropane triacrylate. Exhibits good adhesion, film hardness and faster cure. It contains three polymerizable acrylic groups per molecule which enables it to form... view more

Laromer® TPGDA by BASF is tripropylene glycol diacrylate. It is an acrylic acid ester that is used as a reactive monomer. It contains two polymerizable acrylic groups per molecule which enables it... view more

Lauryl Acrylate 1214 (LA 1214) by BASF is an acrylate monomer. Readily undergoes addition reactions with a wide variety of organic and inorganic compounds and forms homopolymers and copolymers... view more

Lauryl Methacrylate 1214 (LMA 1214) by BASF is a monofunctional methacrylic monomer with a long chain hydrophobic pendant group forms homopolymers and copolymers. Its copolymers can be prepared with... view more

Lauryl Methacrylate 1214 F (LMA 1214 F) by BASF is a water insoluble, low volatile, monofunctional methacrylate monomer with long, linear hydrophobic side chains. It is a mixture and blend of... view more

Loxanol® MI 6735 by BASF is a multifunctional, cationic, highly effective adhesion promoter for bonding different materials. It acts as a physical or chemical cross-linking agent in adhesives. It is... view more

Loxanol® PL 5031 (Old Name: Plastilit 3431) by BASF is a plasticizer for resins and aqueous polymer dispersions. It is used in tackifying additives for dispersion adhesives such as flooring... view more

Loxanol® PL 5060 by BASF is a highly efficient plasticizer for aqueous polymer dispersions. Provides highly efficient plasticizing effect, no VOC and very low odor. Recommended dosage level is 2-5%... view more

Luphen® D DS 3548 by BASF is an aqueous, resin-modified dispersion of a polyester-polyurethane elastomer. Improves the heat resistance of the bond and its resistance to hydrolysis. Used in the... view more

Lupragen® N 106 by BASF acts as catalyst. It is soluble in water and hygroscopic in nature. Lupragen® N 106 is used for polyurethane adhesives and sealants... view more

Lupranat® M 10 R by BASF is diphenylmethane-4,4'-diisocyanate (MDI) with lower functionality and higher reactivity. Its average functionality is about 2.6. It is solvent-free. Lupranat® M 10 R is... view more

Lupranat® M 20 FB by BASF is a solvent-free grade based on 4,4'-diphenylmethane diisocyanate (MDI) containing oligomers of high functionality and isomers. Used as a wood binder. The average... view more

Lupranat® M 20 R is a solvent free 4,4'-diphenylmethane diisocyanate (MDI) containing oligomers of high functionality and isomers. It has relatively low reactivity. Its average functionality is... view more

Lupranat® M 20 S by BASF is a solvent-free product based on diphenylmethane-4,4'-diisocyanate (MDI) containing oligomers of high functionality and isomers. Used for the production of adhesives... view more

Lupranat® M 20 SB by BASF is solvent-free product based on 4,4'-diphenylmethane diisocyanate (MDI) containing oligomers of high functionality and isomers. Used for binders (for wood, sand, rock)... view more

Lupranat® M 20 W by BASF is solvent-free product based on diphenylmethane-4,4'-diisocyanate (MDI) containing oligomers of high functionality and isomers... view more

Lupranat® M 50 by BASF is a 4,4’-diphenylmethane diisocyanate (MDI) containing oligomers of high functionality and isomers. It is solvent-free. Its average functionality is about 2.7. Lupranat® M 50... view more

Lupranat® M 70 R by BASF is 4,4'-diphenylmethane diisocyanate (MDI). It is solvent-free and contains oligomers of high functionality and isomers. Its average functionality is about 2.9... view more

Lupranat® MI by BASF is a mixture of 2,4’ and 4,4' diphenylmethane diisocyanate. It has low acidity. It has a functionality of 2.0 and is liquid at room temperature. It contains higher amount of... view more

Lupranat® MIP by BASF is a blend of 2,4'- and 4,4'-diphenylmethane diisocyanate (MDI). It has a lower content of 2,2'- diphenylmethane diisocyanate than Lupranat MI. Lupranat® MIP is used for the... view more

Lupranat® MM 103 by BASF is carbodiimide-modified diphenylmethane-4,4-diisocyanate (MDI) monomer. Its average functionality is about 2.2. Used for the production of polyurethanes and adhesives... view more

Lupranat® MP 102 by BASF is modified 4,4-diphenylmethane diisocyanate (MDI). Used for flexible and semi-rigid foams and RIM parts... view more

Lupranat® MP 105 by BASF is a modified 4,4'-diphenylmethane diisocyanate (MDI). Used for the production of adhesives... view more

Lupranat® MP 130 by BASF is modified 4,4'-diphenylmethane diisocyanate (MDI). Used for the production of two component adhesives... view more

Lupranat® T 80 by BASF is an isomer mixture of 80% 2,4- and 20% 2,6- toluene diisocyanate (TDI). Used for the production of polyurethane adhesives... view more

Lupranat® T 80 A by BASF is an isomer mixture of 2,4- and 2,6- toluene diisocyanate (TDI). Lupranat® T 80 A is used for the production of polyurethane adhesives. It has a shelf life of 12 months... view more

Lupranat® VP 9252 by BASF is solvent-free product based on 4,4'-diphenylmethane diisocyanate (MDI) containing oligomers of high functionality and isomers. Used for the production of adhesives... view more

Lupranat® VP 9276 by BASF is solvent-free product based on 4,4'-diphenylmethane diisocyanate (MDI) containing oligomers of high functionality and isomers. Used as the base prepolymer for the... view more

Lupranat® VP 9283 by BASF is solvent-free product based on 4,4'-diphenylmethane diisocyanate (MDI) containing oligomers of high functionality and isomers. Used for the production of adhesives... view more

Lupranat® VP 9515 by BASF is solvent-free prepolymer based on 4,4'-diphenylmethane diisocyanate (MDI). Used for the production of moisture cured adhesives and adhesives for bonding various materials... view more

Lupranol® 1000 is polypropylene glycol by BASF. Lupranol® 1000 is used in adhesives and for the production of polyurethane foams and elastomers... view more

Lupranol® 1000/1 is a polypropylene glycol polyol monomer. It is a colorless liquid of low viscosity. It has molecular weight of 2000. Used for the production of polyurethane foams... view more

Lupranol® 1000/2 is a polypropylene glycol polyol monomer. It is a colorless liquid of low viscosity. It has molecular weight of 2000. It differs from conventional polyether polyols in a clearly... view more

Lupranol® 1002/1 is an alkoxylate on the basis of an aliphatic amine monomer. It contains primary hydroxyl end groups. It is a colorless to pale yellow viscous liquid. It has molecular weight of... view more

Lupranol® 1005/1 is a polypropylene glycol polyol monomer. It is a colorless liquid of low viscosity. It has molecular weight of 4000. It differs from conventional polyether polyols in a clearly... view more

Lupranol® 1100 by BASF is a polypropyleneglycol polyol. Used for the production of rigid polyurethane elastomers... view more

Lupranol® 1100/1 is a polypropylene glycol polyol monomer. It is a colorless liquid of low viscosity. It has molecular weight of 1100. Used for the production of polyurethane foams... view more

Lupranol® 1200 is a polypropylene glycol polyol monomer. It is a colorless liquid of low viscosity. It has molecular weight of 450. Used for the production of polyurethane foams... view more

Lupranol® 1301 by BASF is a trifunctional polyether polyol monomer. It is a colorless viscous liquid. It contains only secondary hydroxyl groups. Lupranol® 1301 is used for the production of... view more

Lupranol® 2001 by BASF is a tetrafunctional, highly reactive polyether polyol containing primary hydroxyl groups... view more

Lupranol® 1301 is a trifunctional polyether polyol monomer. It is a colorless viscous liquid. It contains mainly secondary hydroxyl end groups. Used for the production of MDI block foams... view more

Lupranol® 2005/1/BALANCE by BASF is a trifunctional polyether polyol monomer. It is a slightly yellow viscous liquid. It contains mainly secondary hydroxyl end groups. It contains a combination of... view more

Lupranol® 2007/1 by BASF is a trifunctional highly reactive polyether polyol monomer. It is a colorless viscous liquid. It contains primary hydroxyl groups. It contains an antioxidant which is free... view more

Lupranol® 2011/1/PX by BASF is a special mixture of polyols. It is an opaque viscous liquid. It contains an antioxidant combination which is free of BHT (di-t-butyl-hydroxy-toluene). Lupranol®... view more

Lupranol® 2031 by BASF is a trifunctional polyether polyol containing a certain content of primary hydroxyl groups. Possesses a high reactivity. Lupranol® 2031 also contains an anti-oxidant... view more

Lupranol® 2032 by BASF is a trifunctional polyether polyol monomer. It is a colorless viscous liquid. It has higher reactivity due to presence of primary hydroxyl groups. Lupranol® 2032 is used for... view more

Lupranol® 2043 by BASF is a difunctional highly reactive polyether polyol, which contains primary hydroxyl groups. It contains an antioxidant combination which is free from BHT... view more

Lupranol® 2046 is a trifunctional highly reactive polyether polyol by BASF. It contains primary hydroxyl end groups. Lupranol® 2046 is used for the production of highly elastic flexible... view more

Lupranol® 2048 by BASF is a trifunctional reactive polyether polyol. It contains primary hydroxyl groups. Used in molded applications like flexible foams. Lupranol® 2048 is suitable for adhesive... view more

Lupranol® 2070 is non-reactive, trifunctional polyether polyol with secondary hydroxyl end groups. It contains a combination of stabilizer which is free from 2,6-di-tert.butyl-p-kresol (BHT)... view more

Lupranol® 2072 by BASF is trifunctional polyether polyol and contains predominantly secondary hydroxyl groups. It contains a low-emission and low discoloring antioxidant combination (without BHT)... view more

Lupranol® 2074 by BASF is a trifunctional polyether polyol and contains predominantly secondary hydroxyl groups. It contains an anti-oxidant combination to prevent discoloration of the foam core. It... view more

Lupranol® 2090 by BASF is a trifunctional high reactive polyether polyol which contains primary hydroxyl groups. Used in the production of flexible molded polyurethane foam parts in the cold cure... view more

Lupranol® 2092 by BASF is a trifunctional polyether polyol which contains primary hydroxyl groups. It contains a combination of stabilizer which is free from 2,6-Di-tert.butyl-p-kresol (BHT)... view more

Lupranol® 2095 by BASF is a trifunctional high reactive polyether polyol which contains primary hydroxyl groups. It is free from BHT (2,6-di-t-butyl-hydroxy-toluene). Lupranol® 2095 is used in the... view more

Lupranol® 2100 by BASF is a difunctional polyether polyol based on polyethylene oxide. Used with others polyols for the production of prepolymers... view more

Lupranol® 3300 by BASF is a trifunctional polyether polyol based on glycerine. It contains only secondary hydroxyl groups. Lupranol® 3300 is used for the production of rigid foams out of... view more

Lupranol® 3402 by BASF is a tetra-functional polyether polyol containing ethylenediamine and propylene oxide. Used for the production of flexible and rigid polyurethane foams as well as adhesive... view more

Lupranol® 3402 by BASF is tetra functional polyether polyol containing ethylenediamine and propylene oxide. Acts as a crosslinker. Lupranol® 3402 is a highly reactive polyol used in combination with... view more

Lupranol® 3424 by BASF is a higher functional polyether polyol based on sorbitol. It contains only secondary hydroxyl groups... view more

Lupranol® 3424 by BASF is a higher functional polyether polyol based on sucrose. It contains only secondary hydroxyl groups. Used in rigid foams... view more

Lupranol® 3424 by BASF is a polyether polyol. It has high functionality and low viscosity. Lupranol® 3424 is used for the production of CFC free rigid foam systems... view more

Lupranol® 3504/1 by BASF is a polyether polyol based on trimethylolpropane. Acts as a crosslinker. It has mainly secondary hydroxyl groups... view more

Lupranol® 3505/1 by BASF is a trifunctional polyether polyol. It acts as a crosslinking agent. It has higher reactivity due to its content of primary hydroxyl groups... view more

Lupranol® 3508/1 by BASF is a tetrafunctional polyether polyol based on ethylenediamine and propylene oxide. Acts as a crosslinking agent. Lupranol® 3508/1 is used for the production of rigid or... view more

Lupranol® 3530 by BASF is trifunctional polyether polyol. It has higher reactivity due to its higher content of primary hydroxyl groups... view more

Lupranol® 4002/1 by BASF is a non-reactive polyether polyol monomer. It is an opaque viscous liquid. It has been grafted with styrene-acrylonitrile (SAN) and contains approximately 45 % solids. It... view more

Lupranol® 4003/1 by BASF is a polyether polyol monomer. It is an opaque viscous liquid which has been grafted with styrene-acrylonitrile (SAN) and contains mainly primary hydroxyl end groups. It... view more

Lupranol® 4005/1/SC10 by BASF is a non-reactive polyether polyol monomer. It is an opaque viscous liquid. It has been grafted with styrene-acrylonitrile (SAN) and contains approximately 10% solids... view more

Lupranol® 4005/1/SC15 is a non-reactive polyether polyol monomer. It has been grafted with styrene-acrylonitrile (SAN) and contains approximately 15% solids. It is an opaque viscous liquid. It... view more

Lupranol® 4005/1/SC25 by BASF is a non-reactive polyether polyol grafted with styrene-acrylonitrile (SAN) and contains approximately 25% solids. It forms a stable dispersion which does not separate... view more

Lupranol® 4006/1/SC10 by BASF is a non-reactive polyether polyol grafted with styrene-acrylonitrile (SAN) and contains approximately 10% solids. It forms a stable dispersion which does not separate... view more

Lupranol® 4006/1/SC15 by BASF is a non-reactive polyether polyol. It is an opaque viscous liquid. It has been grafted with styrene-acrylonitrile (SAN) and contains approximately 15% solids. It... view more

Lupranol® 4006/1/SC25 by BASF is polyether polyol monomer. It is a non-reactive opaque viscous liquid. It has been grafted with styrene-acrylonitrile (SAN) and contains approximately 25% solids. It... view more

Lupranol®4010/1/SC15 by BASF is polyether polyol which has been grafted with styrene-acrylonitrile (SAN) and contains mainly primary hydroxyl end groups. It contains about 15% solids. It contains a... view more

Lupranol® 4010/1/SC25 by BASF is polyether polyol monomer. It has been grafted with styrene-acrylonitrile (SAN) and contains mainly primary hydroxyl end groups. It contains about 25% solids. It... view more

Lupranol® 4010/1/SC40 by BASF is polyether polyol. It has been grafted with styrene-acrylonitrile (SAN) and contains mainly primary hydroxyl end groups. It contains about 40% solids. It contains a... view more

Lupranol® VP 9272 by BASF is a trifunctional polyether polyol containing a high proportion of secondary hydroxyl groups. Used for the manufacture of adhesives and sealants... view more

Lupranol® VP 9289 by BASF is a trifunctional polyether polyol mainly secondary hydroxyl end groups. It contains antioxidant which is free from BHT (di-t-butyl-hydroxy-toluene). Lupranol® VP 9289 is... view more

Lupraphen® 1600/4 by BASF is a difunctional, aliphatic polyester polyol. It is a colorless to slightly yellow solid. Used for the production of polyurethane elastomers... view more

Lupraphen® 1622/1 by BASF is a difunctional, aliphatic polyester polyol. It improves resistance against hydrolysis and is liquid at room temperature. Lupraphen® 1622/1 is used for the production of... view more

Lupraphen® 1901/1 by BASF is a difunctional polyester polyol. It is based on aromatic dicarboxylic acids. Used to improve high temperature performance and fire resistance. It has been developed for... view more

Lupraphen® 2600/1 by BASF is a partially-branched, aliphatic, polyester polyol. It is a colorless to pale yellow, viscous liquid. Used for the production of polyurethanes... view more

Lupraphen® 2600/2 by BASF is a slightly branched, aliphatic, polyester polyol. It is a colorless to slightly yellow viscous liquid. It has a lower reactivity than Lupraphen® 2600/1. Lupraphen®... view more

Lupraphen® 2601/1 by BASF is a partially-branched, aliphatic, polyester polyol. It contains antioxidants to prevent discoloration of the foam core. Lupraphen® 2601/1 is used for the production of... view more

Lupraphen® 2602/1 by BASF is a slightly branched, aliphatic polyester polyol. It is a colorless to slightly yellow viscous liquid. Lupraphen® 2602/1 is used for production of flexible polyurethane... view more

Lupraphen® 2901/1 by BASF is a partially-branched polyester polyol which is stabilized against oxidation. The stabilizer is free from phosphite and BHT (2,6-di-t-butyl-4-methylphenol). It is a... view more

Lupraphen® 5606/1 by BASF is a difunctional, aliphatic polyester polyol. Used for the production of compact and cellular polyurethane elastomers. It is colorless to slightly yellow viscous liquid... view more

Lupraphen® 5608/1 by BASF is a difunctional, aliphatic, polyester polyol. It is a colorless to slightly yellow viscous liquid. Provides balanced mechanical and flexural properties. Lupraphen® 5608/1... view more

Lupraphen® 5609/1 by BASF is a difunctional, aliphatic, polyester polyol. It is a colorless to slightly yellow viscous liquid. Used for the production of polyurethanes... view more

Lupraphen® 5619/1 by BASF is a saturated aliphatic polyester based on adipic acid. Used for the production of polyurethane systems. Lupraphen® 5619/1 is recommended for adhesive and footwear... view more

Lupraphen® 6601/3 by BASF is a slightly branched, aliphatic, polyester polyol. It is a colorless to slightly yellow viscous liquid. It has a lower reactivity than Lupraphen® 2600/1. Provides... view more

Lupraphen® 8002 by BASF is a solvent free, branched condensation resin based on polyol. Can be combined with isocyanates. Used in solvent free two component systems for adhesives. Reduces the... view more

Lupraphen® 8004 by BASF is a branched, aromatic-aliphatic polyester polyol... view more

Lupraphen® 8100 by BASF is difunctional, aliphatic, polyester polyol. Used for the production of polyurethane elastomers... view more

Lupraphen® 8101 by BASF is difunctional, aliphatic, polyester polyol... view more

Lupraphen® 8103 by BASF is difunctional, aliphatic, polyester polyol. Used for the production of compact and cellular polyurethane elastomers... view more

Lupraphen® 8108 by BASF is a difunctional, aliphatic polyester polyol. Used for the production of polyurethane flexible elastomers... view more

Lupraphen® 8109 by BASF is partially-branched, aliphatic polyester polyol. Used for the production of polyurethane flexible elastomers... view more