KANEKA MS POLYMER™ S303H by Kaneka is a mid-modulus, silyl-terminated polyether (STPE) used as a base resin for producing high-performance moisture cure adhesives and sealants utilizing either a hot... view more

KANEKA MS POLYMER™ S327 by Kaneka is a silyl-terminated polyether (STPE) used as a base resin for producing high-performance moisture cure adhesives and sealants utilizing hot or cold process. It... view more

KANEKA SILYL™ SAX350 by Kaneka is a silyl-terminated polyether (STPE) used as a base resin for producing high-performance moisture cure adhesives and sealants utilizing either a hot or cold process... view more

KANEKA SILYL™ SAX260 by Kaneka is a silyl-terminated polyether (STPE) used as a base resin for producing high-performance moisture cure sealants and adhesives utilizing either a hot or cold process... view more

KANEKA SILYL™ SAX220 by Kaneka is a silyl-terminated polyether (STPE) used as a base resin for producing high-performance moisture cure adhesives and sealants utilizing either a hot or cold process... view more

Cardolite® NX-2026 is a high purity cardanol, bio-based diluent, resin modifier, and accelerator designed for use in adhesives and sealants. It is based on natural, renewable, non-food raw material... view more

Cardolite® Ultra LITE 513 by Cardolite is a low viscosity, mono-functional epoxy reactive diluent. The long hydrophobic aliphatic side chain of cardanol gives this product a very low viscosity and... view more

Cardolite® LITE 3040 is a solvent free, low viscosity phenalkamide epoxy curing agent by Cardolite. Exhibits excellent mechanical properties and excellent adhesion. Provides outstanding durability... view more

Cardolite® NX-5594 is a phenalkamine epoxy curing agent that has favorable labeling, faster cure at low temperature, i.e. 0°C. Utilized as a solvent free hardener for epoxy adhesives and as a... view more

Cardolite® GX-3090 is a solvent free and very low viscosity phenalkamide epoxy curing agent. Exhibits excellent mechanical properties, faster strength development, and good adhesion at recommended... view more

Dynasylan® 1124 by Evonik acts as an adhesion promoter and surface modifier with excellent crosslinking properties. It is a secondary aminofunctional methoxy-silane possessing two symmetric silicon... view more

Dynasylan® 1189 by Evonik is a bifunctional silane. Acts as an adhesion promoter or as a surface modifier. Provides flexural strength, tensile strength, impact strength, modulus of elasticity... view more

Loxanol® PL 5060 by BASF is a highly efficient plasticizer for aqueous polymer dispersions. Provides highly efficient plasticizing effect, no VOC and very low odor. Recommended dosage level is 2-5%... view more

TYTAN™ S4 by Borica is a di-n-butoxy titanium chelate (ethylacetoacetate titanate) grade. Acts as an adhesion promoter. It is liquid at room temperature. Exhibits controlled reactivity, improved... view more

TYTAN™ S6 by Borica is a di-iso-butoxy titanium chelate (ethylacetoacetate titanate) grade. Acts as an adhesion promoter. It is liquid at room temperature. Offers fast curing through catalysis of... view more

DESMODUR® E 743 by Covestro is polyisocyanate prepolymer based on diphenylmethane 4,4'-diisocyanate(MDI). DESMODUR® E 743 is used in adhesives for construction, transportation and furniture... view more

It is a solvent-free saturated polyester resin. Desmophen® S-1011-55 provides excellent solvent resistance and also good low temperature properties. It is a high specification grade general purpose... view more

It is a silane terminated polyurethane prepolymer. Desmoseal® S XP 2458 is used as a base resin in solvent-free, moisture-curing one-pack systems. These systems cure without bubbles or blisters if... view more

Accelerator 2950 by Huntsman is a reactive tertiary amine based accelerator with low plasticizing effect. Used as co-hardener when used with polyurethane systems, polyamines, polyamidoamines and... view more

Accelerator 3130 by Huntsman is a non-amine accelerator dissolved in ethanol. It is ideal as drop-in accelerator to cope with cold weather. The ratio of resin to hardener remains unchanged... view more

Accelerator 960-1 by Huntsman is a low viscosity co-hardener or accelerator based on aminophenol. It shortens dust-dry time and full-cure time. The quantity of Accelerator 960-1 added with Araldite®... view more

Aradur® 140 is a BzOH-free, polyamidoimidazoline curing agent by Huntsman. It can formulate heat-resistant epoxy resin mortars. Exhibits very high degrees of adhesion and flexibility along with good... view more

Polyamine. Suitable for flexibilizing and hydrophobizing adhesives and mastics. It exhibits low viscosity. Nonylphenol-free. When used along with suitable epoxy resins, it provides improved curing... view more