Actmix® ADC-75P is an azodicarbonamide. It is a nitrogenous organic foaming agent. It has a relatively high foaming temperature (200-210?), which can be effectively reduced by addition of small... view more

Curekind® ETU(NA-22) Dust free Powder is ethylene thiourea. Acts as an accelerator. It is compatible with NBR-CH & NBR-W and chlorohydrin rubber, polyacrylate rubber products. It is regulated for... view more

Curekind® ETU(NA-22) Powder by Ningbo Actmix Rubber Chemicals is ethylene thiourea. Acts as an accelerator. It is compatible with NBR-CH & NBR-W and chlorohydrin rubber, polyacrylate rubber products. It is regulated for use in articles... view more

Curekind® NDBC(NBC) Dust free Powder by Ningbo Actmix Rubber Chemicals is a nickel dibutyl dithiocarbamate-based antioxidant. It avoids the rubber crack under the sunshine and ozone, improves the heat-resistant of CR and chloro-sulfonated... view more

Curekind® NDBC(NBC) Powder is a nickel dibutyl dithiocarbamate. Acts as an antioxidant. It avoids the rubber crack under the sunshine and ozone, improves the heat-resistant of CR and... view more

Zinc oxide. Used as an accelerator activator for transparent rubber goods and also as an acid acceptor in polychloroprene adhesives where transparency is required. Permits to achieve long open-tack... view more

Thermoplastic terpene-phenolic resin primary used for the enhancement of tack in aqueous systems and in contact adhesives. Compatible with high pH polychloroprene latices. Can be blended with other... view more

Aqueous dispersion primarily used for enhancing tack in aqueous adhesive systems. Developed for use with carboxylated polychloroprene latices. (Can be blended with latices which are neutral without... view more

Non-ionic aqueous alkylphenolic resin primarily used in solvent borne contact adhesives. Formulated for use with carboxylated polychloroprene latices. Can also be used with carboxylated nitrile... view more

Petro-Rez® PTA-C by Akrochem is a low melt point, aromatic hydrocarbon resin, used as a tackifier/softener for nitrile-, chloroprene-, chlorosulfonated polyethylene-, SBR, butyl- and many other... view more

AQUARES T95P DISPERSION by Aquaspersions is an emulsion of a terpene-phenolic resin. It is miscible in water and exhibits negligible evaporation rate. AQUARES T95P DISPERSION is recommended for acrylic PSA, SBR and... view more

Alkylphenolic resin. Used as a tackifier in CR adhesive. Offers tackiness retention time. Possesses good phasing stability, heat resistance and adhesion strength... view more

Alkylphenolic resin. Used as a tackifier in CR adhesives. Offers long tackiness retention... view more

Alkylphenolic resin. Used as a tackifier in CR adhesive. Offers tackiness retention time. Possesses good phasing stability, heat resistance and adhesion strength... view more

Tamanol 586 by Arakawa Chemical is alkylphenolic resin. Used as a tackifier in CR adhesives. Offers good heat resistance and stability... view more

Thermoplastic rosin phenolic resin. Used for polychloroprene adhesive and hot melt adhesives. Provides very good heat stability. Increases the heat creep... view more

Dispex® Ultra FA 4431 (Old name: Efka® 6230) by BASF is aliphatic polyether with acidic groups. Acts as a dispersing agent. Offers benefits such as reduced grinding and dispersion time, increased... view more

Efka® SL 3236 by BASF is solvent-free modified polysiloxane. Used in hotmelt, solvent based, reactive and radiation curing adhesives and in sealants. Acts as a wetting agent. Offers benefits such as... view more

Irganox® 1726 by BASF is a non-staining, non-discoloring multifunctional phenolic antioxidant. It contains 4,6-bis (dodecylthiomethyl)-o-cresol. It is low in volatility, resistant to extraction, and... view more

Tinuvin® 123 by BASF is a liquid hindered amine light stabilizer (HALS) based on an amino-ether functionality. It has low volatility. Its performance can be significantly improved when used in... view more

Tinuvin® 144 by BASF is a light stabilizer of the hindered amine class (HALS). Tinuvin® 144 is used in hot melt, reactive, solvent-based and radiation curing adhesives and sealants... view more

BYK® -065 by BYK is a solution of foam-destroying polysiloxanes. Acts as a defoamer. This additive contains fluoro-modified silicone. It is preferably used in the chlorinated rubber, vinyl and... view more

BYK® -070 by BYK is a solution of foam-destroying polymers and polysiloxanes. Acts as a air release agent. It was developed for medium to high polar systems and is successfully used in the... view more

BITONER® BA-120 by Bitoner Resin is C9 aromatic hydrocarbon resin-based tackifier. It is obtained from polymerizing unsaturated aromatic petroleum feedstock. It is low VOC and odor grade which shows good... view more

Non-reactive, non-hygroscopic, magnesium oxide. Used as a thickener and an acid acceptor in adhesives. Offers compatibility with neoprene, hypalon, natural rubber, SBR, viton, butyl rubber... view more

Non-reactive, non-hygroscopic, magnesium oxide. Used as a thickener and an acid acceptor in adhesives. Offers compatibility with neoprene, hypalon, natural rubber, SBR, viton, butyl rubber... view more

Non-reactive, non-hygroscopic, magnesium oxide. Used as a thickener and an acid acceptor in adhesives. Offers compatibility with neoprene, hypalon, natural rubber, SBR, viton, butyl rubber... view more

Vikoflex® 7170 Epoxidized Vegetable Oil by Cargill is an epoxidized soybean oil-based plasticizer. It provides excellent heat and light stabilization and plasticization efficiency of PVC flexible and semi-rigid compounds, as... view more

EMULTROL E-177 by Concentrol is a highly stable esterified rosin resin emulsion. Acts as a tackifier. Improves adhesion upon non-polar substrates and polymeric dispersion cardboard. Offers good wetting... view more

DERTOLINE CG by DRT is deodorized glycerol ester of rosin-based tackifier. It is used in SBR or polyvinyl acetate-based chewing gum bases and hot-melt or solvent-based adhesives. This light-colored... view more

DERTOLINE G2 L by DRT is rosin esterified with glycerine-based tackifier. This deodorized and stabilized rosin is used in based hot-melt adhesives for packaging, bookbinding, woodworking, labeling... view more

DERTOLINE P 105 by DRT is a stabilized pentaerythritol ester of rosin-based tackifier. It is used in adhesives and road marking hot-melt adhesives. DERTOLINE P 105 is compatible with ethylene/vinyl... view more

DERTOLINE P 110 by DRT is a stabilized pentaerythritol ester of rosin-based tackifier. It is compatible with ethylene/vinyl acetate copolymers, ethylene, ethyl acrylate, block copolymers (SIS, SBS)... view more

DERTOLINE P2 L by DRT is a deodorized and stabilized, pentaerythritol-esterified rosin-based tackifier. This rosin is used in EVA based hot-melt adhesives for packaging, bookbinding, woodworking... view more

It acts as a very reactive isocyanate hardener or curing agent. Provides improved resistance against chemicals, hydrolysis and high as well as low temperature. It is free of chlorinated hydrocarbon... view more

It acts as an isocyanate hardener for the cross linking of polyurethane-, polychloroprene- and natural rubber adhesives. It is distinguished by its long pot life in polyurethane and polychloroprene... view more

Active magnesium oxide. Possesses high purity and activity. Used in rubber and adhesives industries. Regulates the rate of vulcanization and prevents the development of "scorch" in the production of... view more

Active magnesium oxide. Possesses high purity and activity. Used in rubber and adhesives industries. Regulates the rate of vulcanization and prevents the development of "scorch" in the production of... view more

Active magnesium oxide. Possesses high purity and activity. Used in rubber and adhesives industries. Regulates the rate of vulcanization and prevents the development of "scorch" in the production of... view more

Active magnesium oxide. Possesses high purity and activity. Used in rubber and adhesives industries. Regulates the rate of vulcanization and prevents the development of "scorch" in the production of... view more

Active magnesium oxide. Possesses high purity and activity. Used in rubber and adhesives industries. Regulates the rate of vulcanization and prevents the development of "scorch" in the production of... view more

145 (ROSIN PENTAERYTHRITE RESIN) by Deqing Jiyuan Synthetic Resin acts as a tackifier. It is an irregular transparent solid made from gum rosin esterified by pentaerythrite. Exhibits light color, good resistance to yellowing, good heat... view more

Rosin pentaerythrite resin. Acts as a tackifier. It is an irregular transparent solid made from gum rosin esterified by pentaerythrite. Exhibits light color, good resistance to yellowing, good heat... view more

Rosin pentaerythrite resin. Acts as a tackifier. It is an irregular transparent solid made from gum rosin esterified by pentaerythrite. Exhibits light color, good resistance to yellowing, good heat... view more

Rosin pentaerythrite resin. Acts as a tackifier. It is an irregular transparent solid made from gum rosin esterified by pentaerythrite. Exhibits light color, good resistance to yellowing, good heat... view more

Rosin pentaerythrite resin. Acts as a tackifier. It is an irregular transparent solid made from gum rosin esterified by pentaerythrite. Exhibits light color, good resistance to yellowing, good heat... view more

Adhesion Resin 2220 by Evonik is polyester resin. It is used in adhesives for can and coil coating paints. It acts as an adhesion promoter. Adhesion Resin 2220 offers benefits such as light-fast and... view more

Adhesion Resin LTW-B by Evonik is a polyester resin. It acts as an adhesion promoter. It offers benefits such as improved flexibility at normal and low temperatures, highly light-fast and weather... view more

Aluminium Oxide C by Evonik is used in water-based neoprene and EVA adhesives. It provides anti-sagging, thixotropic, stabilizing effects, reinforcement and pigment suspension... view more

Rewopol® D 510 by Evonik is sodium-2-ethylhexanol sulphate. It is used as an emulsifier for the production of emulsion polymers such as polyvinyl chloride, polyvinylidene chloride, acrylonitrile... view more

SIPERNAT® 880 by Evonik is synthetic precipitated calcium silicate. It has good thickening and excellent flow improving properties. SIPERNAT® 880 is used as auxiliary in polychloroprene adhesives... view more

Terpene Phenolic Resin by Foreverest Resources possesses high softening point and good stickability. Is particularly suitable to be used in making chloronorgutta rubber (graft polychloroprene rubber) adhesive for PVC... view more

F-210 by Fujian Ninghua Lifeng Chemical is rosin modified phenolic resin. Acts as a tackifier. Possesses good oil solubility, solvent solubility and water resistance. F-210 is used in all- purpose adhesive... view more

F-2210 by Fujian Ninghua Lifeng Chemical is rosin modified phenolic resin. Acts as a tackifier. Possesses light color, good oil solubility, solvent solubility and water resistance. F-2210 is used in all-purpose... view more

GR-90S by Fujian Ninghua Lifeng Chemical is rosin ester. Acts as a tackifier. Possesses light color, low odor, good oxidation resistance, heat stability, aging resistant, good compatibility with macromolecular... view more

Haixe 803L by Fujian Ninghua Lifeng Chemical is terpene phenolic resin. Acts as a tackifier. Possesses good compatibility with chloroprene, high softening point and high thermal stability. Haixe 803L has good initial... view more

138A by Guangdong Komo is a light color, partially disproportionated hydrogenated resin-based tackifier. It shows good compatibility with EVA and can be mixed with other polymers including NR, CR... view more

146 by Guangdong Komo is a light color, partially disproportionated hydrogenated resin-based tackifier. It shows good compatibility with EVA and can be mixed with other polymers including NR, CR... view more

146N by Guangdong Komo is a partially disproportionated hydrogenated resin-based tackifier. It exhibits light color, low odor, excellent thermal stability and good softness. It shows good... view more

Modified gum rosin polyol ester. It is a tackifier which is made from special refined gum rosin by a series of advanced processes of partial hydrogenation, esterification and stabilization. Exhibits... view more

Modified gum rosin polyol ester. It is a tackifier which is made from special refined gum rosin by a series of advanced processes of partial hydrogenation, esterification and stabilization. Exhibits... view more

Dragonox -1726 by Guangzhou Flying Dragon is 4,6-bis(dodecylthiomethyl)-o-cresol. It is a multifunctional phenolic antioxidant. It is non-staining, non-discoloring , low in volatility, resistant to extraction and... view more

HALLBOND® RX-13928 S by Hallstar acts as an adhesion promoter. It provides equal or better adhesion as compared to standard adhesion systems. It is compatible with butyl chlorinated rubber, EPDM, natural... view more

Highly dispersible, free-flowing acid absorber. Combination of a lower activity magnesium oxide and a process oil. Used in polychloroprene-based adhesives... view more

Lightly calcined, high activity magnesium oxide. Used as acid absorber. Suits in applications where dispersion characteristics are important, such as polychloroprene-based adhesives... view more

Lightly calcined magnesium oxide. Used as acid absorber. Suits to neutralize acids formed during the processing of elastomers including polychloropren, chlorosulfonated polyethylene, butyl... view more

Magnesium oxide. Used as acid absorber. Suits for non-critical applications involving polychloroprene-based adhesives... view more