Butyl Acrylate, 15 ppm MEHQ by Dow is used for copolymer-based adhesives. Offers flexibility, weatherability, internal plasticization, adhesion, range of hardness and resistance to abrasion as well as oil or... view more

DOWFAX™ 63N10 Nonionic Surfactant by Dow is linear EO/PO block copolymer-based foam control agent. It is produced by polymerizing ethylene oxide (EO), propylene oxide (PO), and/or butylene oxide... view more

Methyl Methacrylate, 15 ppm AO-30 by Dow offers hardness and flexibility. It also exhibits clarity, color compatibility, toughness, internal plasticization and weatherability. Methyl Methacrylate... view more

Methylene Chloride Technical E is used as a solvent in adhesives. Methylene Chloride Technical E offers high purity, high quality, non-flammability and volatility... view more

Methylene Chloride Technical Grade by Dow is used as a solvent chlorinated in adhesives. It possesses non-flammability and volatility... view more

Eastman Optifilm™ Enhancer 300 by Eastman is a readily biodegradable, efficient, low odor, low toxicity, LVP-VOC, Non-HAP, Non-SARA, excellent retarder solvent & coalescent. It shows broad compatibility, easy... view more

Eastman Optifilm™ Enhancer 400 by Eastman is a readily biodegradable, efficient, low odor, low toxicity, LVP-VOC, non-HAP, non-yellowing, non-SARA, excellent retarder solvent & coalescent. It is a low odor... view more

Eastman™ 2-Ethylhexanol by Eastman is a biodegradable, versatile solvent that features excellent reactivity as a chemical intermediate. It offers defoaming, wetting, and dispersing characteristics. It... view more

Eastman™ Butyl Acetate by Eastman is a readily biodegradable, medium boiling ester solvent. It offers good solvent activity, high electrical resistance and low MIR value, surface tension and water solubility... view more

Eastman™ EEH by Eastman is a readily biodegradable, solvent & efficient coalescent. It has low water miscibility, surface tension, good hydrolytic stability, slow evaporation rate and high... view more

DAPRO® DF 21 by Elementis is a blend of hydrophobic silica, emulsifiers and mineral oil. Acts as a defoamer readily dispersible in water. Suitable for water-borne adhesives. Typically used at... view more

DAPRO® DF 420 by Elementis is a water dispersible, non-explosive defoamer. Exhibits excellent persistence and compatibility. Suitable for aqueous adhesives. Complies with REACH, TSCA, EINECS, DSL... view more

Defom W-086 by Elementis is a hydrocarbon based waterborne defoamer. It is mixture of mineral oil and hydrophobic particle. It exhibits excellent antifoaming, defoaming and compatibility. It is... view more

RHEOLATE® 135 by Elementis is an APE-free, newtonian HASE thickener. It demonstrates both chain entanglement and associative thickening mechanisms with an excellent balance of application properties... view more

RHEOLATE® 175 rheological additive by Elementis is a low viscosity, easy-to-use hydrophobically modified alkali-swellable emulsion (HASE). It is APEO (alkyl phenol ethoxylate)- and solvent- free... view more

Bluesil™ ESA 6024 A & B by Elkem Silicones is a pourable, two component silicone rubber that cures at room temperature by a polyaddition reaction, to a very soft and translucent silicone gel... view more

Bluesil™ ESA 6120 QC A & B by Elkem Silicones is a pourable two components silicone rubber that cures quickly at room temperature by a polyaddition reaction, to a very soft and clear silicone gel... view more

Bluesil™ ESA 7244 A & B by Elkem Silicones is a liquid two-component, polyaddition heat curing silicone elastomer. It is a solvent-free, self-leveling grade designed for adhesive and sealant... view more

Bluesil™ ESA 7250 A & B by Elkem Silicones is a two component, optically clear, high strength silicone elastomer. Cures by a polyaddition reaction at room temperature. Curing can be accelerated by... view more

Bluesil™ ESA 7252 A & B by Elkem Silicones is a low viscosity , non-corrosive, two-component silicone elastomer which cures at room temperature by a polyaddition reaction. It is supplied in the form... view more

OXYESTER® EP-HS 2272 by Evonik is a linear polyester diol grade (100% liquid). It exhibits faster curing cycles, lower VOC (volatile organic compounds) contents and higher flexibility momentum... view more

Escorene™ Ultra UL 00218CC3 by ExxonMobil Chemical is a copolymer of ethylene and vinyl acetate. It contains thermal stabilizer as an additive. Escorene™ Ultra UL 00218CC3 is used in hot melt... view more

Escorene™ Ultra UL 00226CC by ExxonMobil Chemical is a copolymer of ethylene and vinyl acetate. It contains thermal stabilizer as an additive. Escorene™ Ultra UL 00226CC is used in hot melt... view more

Escorene™ Ultra UL 00328 by ExxonMobil Chemical is a copolymer of ethylene and vinyl acetate. It does not contain any additive. Escorene™ Ultra UL 00328 is used in hot melt adhesives, wire and... view more

ExxonMobil™ IPA (Isopropyl Alcohol) by ExxonMobil Chemical acts as a solvent. It is a clear, colorless and volatile material with a light odor. It possesses physico-chemical and solvency properties... view more

Exxsol™ D100 by ExxonMobil Chemical acts as low aromatic hydrocarbon solvent. It is a clear and transparent dearomatized liquid replacing traditional solvents such as mineral or white spirits. It... view more

SynPlast™ DOA-FM by GEON Performance Solutions is a branched, C8 di (2-ethylhexyl) adipate ester-based plasticizer. SynPlast™ DOA-FM is recommended for adhesives, films, footwear and gaskets... view more

Polyester sebacate. Acts as a high molecular weight polymeric plasticizer. Compatible with nitrile and polyvinyl chloride. In DIOPLEX® 100 good heat resistance is achieved above and beyond that of... view more

OS® 1000 by Honeywell is a clear, colorless methyloximino silane grade in the form of a combustible liquid. Acts as a crosslinking agent for silicone sealants and adhesives. It readily undergoes... view more

OS® 2000 by Honeywell is a vinyl tris (methyl ethylketoxime) silane grade in the form of a clear, colorless combustible liquid. Acts as a crosslinking agent for silicone sealants and adhesives... view more

OS® 9000 by Honeywell is a phenyl oximino silane grade in the form of a clear colorless to pale yellow combustible liquid. Acts as a crosslinking agent for silicone sealants and adhesives. It... view more

Jeffamine® D-4000 Amine by Huntsman is polyetheramine. It is characterized by repeating oxypropylene units in the backbone. It is a difunctional and primary amine with average molecular weight of... view more

Jeffamine® THF-100 Polyetheramine by Huntsman is diamine based on a PTMEG (poly(tetramethylene ether glycol)/PPG (polypropylene glycol) copolymer. It is useful in a variety of polymers, including cured epoxy resins... view more

Jeffamine® THF-170 Polyetheramine by Huntsman is diamine of approximately 1700 molecular weight. It is chemically based on a PTMEG [poly(tetramethylene ether glycol)]/PPG (polypropylene glycol)... view more

TEROL® 256 by Huntsman is a high functionality, modified aromatic polyester polyol. It has enhanced fire-performance, pre- and post-consumer recycle content. It offers unique performance and... view more

TEROL® 305 by Huntsman is aromatic polyester polyol. It has enhanced fire-performance, low hydroxyl value, pre- and post-consumer recycle content. TEROL® 305 provides unique performance and... view more

Esacure KIP 100 F by IGM Resins is a photoinitiator. It is a liquid mixture of Esacure KIP 150 (70% ) and Omnirad 1173 (30%). It offers high reactivity, low odor and color stability. This grade is... view more

Esacure KIP 150 by IGM Resins is an oligomeric polyfunctional alpha-hydroxyketone based photoinitiator with low VOC. It offers high reactivity, non-yellowing properties, no migration and low odor. It... view more

Esacure KIP 75 LT by IGM Resins acts as a photoinitiator. It is a liquid mixture of oligomeric alpha-hydroxy ketone and tripropylene glycol. It offers high reactivity, non-yellowing properties and low... view more