Surfynol® PSA-336 by Evonik is a surfactant and dynamic wetting agent. It is used in water-based pressure sensitive and laminating adhesives. Surfynol® PSA-336 offers good reduction of equilibrium... view more

Surfynol® SE by Evonik is a non-ionic surfactant. It can act as a highly effective wetting agent, defoamer and viscosity stabilizer. It is used in water-based adhesives. It offers synergistic... view more

Surfynol® SE-F by Evonik is a self-emulsifiable surfactant based on acetylenic diol chemistry. It is used in pressure sensitive adhesives. It possesses wetting properties, consistent adhesive... view more

Surfynol® TG by Evonik is a low-foaming, non-ionic surfactant and wetting agent for pigment and substrate wetting in aqueous systems. It offers reduced water sensitivity and excellent reduction of... view more

Surfynol® TG-E by Evonik is a surfactant. It provides low foam wetting of powders and liquid concentrates, as well as a wetting aid for rapid dispersion of concentrates in water. Surfynol® TG-E is... view more

Escorene™ Ultra UL 00218CC3 by ExxonMobil Chemical is a copolymer of ethylene and vinyl acetate. It contains thermal stabilizer as an additive. Escorene™ Ultra UL 00218CC3 is used in hot melt... view more

Escorene™ Ultra UL 00226CC by ExxonMobil Chemical is a copolymer of ethylene and vinyl acetate. It contains thermal stabilizer as an additive. Escorene™ Ultra UL 00226CC is used in hot melt... view more

Escorene™ Ultra UL 00328 by ExxonMobil Chemical is a copolymer of ethylene and vinyl acetate. It does not contain any additive. Escorene™ Ultra UL 00328 is used in hot melt adhesives, wire and... view more

ExxonMobil™ IPA (Isopropyl Alcohol) by ExxonMobil Chemical acts as a solvent. It is a clear, colorless and volatile material with a light odor. It possesses physico-chemical and solvency properties... view more

Exxsol™ D100 by ExxonMobil Chemical acts as low aromatic hydrocarbon solvent. It is a clear and transparent dearomatized liquid replacing traditional solvents such as mineral or white spirits. It... view more

SynPlast™ DOA-FM by GEON Performance Solutions is a branched, C8 di (2-ethylhexyl) adipate ester-based plasticizer. SynPlast™ DOA-FM is recommended for adhesives, films, footwear and gaskets... view more

Polyester sebacate. Acts as a high molecular weight polymeric plasticizer. Compatible with nitrile and polyvinyl chloride. In DIOPLEX® 100 good heat resistance is achieved above and beyond that of... view more

OS® 1000 by Honeywell is a clear, colorless methyloximino silane grade in the form of a combustible liquid. Acts as a crosslinking agent for silicone sealants and adhesives. It readily undergoes... view more

OS® 2000 by Honeywell is a vinyl tris (methyl ethylketoxime) silane grade in the form of a clear, colorless combustible liquid. Acts as a crosslinking agent for silicone sealants and adhesives... view more

OS® 9000 by Honeywell is a phenyl oximino silane grade in the form of a clear colorless to pale yellow combustible liquid. Acts as a crosslinking agent for silicone sealants and adhesives. It... view more

Jeffamine® D-4000 Amine by Huntsman is polyetheramine. It is characterized by repeating oxypropylene units in the backbone. It is a difunctional and primary amine with average molecular weight of... view more

Jeffamine® THF-100 Polyetheramine by Huntsman is diamine based on a PTMEG (poly(tetramethylene ether glycol)/PPG (polypropylene glycol) copolymer. It is useful in a variety of polymers, including cured epoxy resins... view more

Jeffamine® THF-170 Polyetheramine by Huntsman is diamine of approximately 1700 molecular weight. It is chemically based on a PTMEG [poly(tetramethylene ether glycol)]/PPG (polypropylene glycol)... view more

TEROL® 256 by Huntsman is a high functionality, modified aromatic polyester polyol. It has enhanced fire-performance, pre- and post-consumer recycle content. It offers unique performance and... view more

TEROL® 305 by Huntsman is aromatic polyester polyol. It has enhanced fire-performance, low hydroxyl value, pre- and post-consumer recycle content. TEROL® 305 provides unique performance and... view more

Esacure KIP 100 F by IGM Resins is a photoinitiator. It is a liquid mixture of Esacure KIP 150 (70% ) and Omnirad 1173 (30%). It offers high reactivity, low odor and color stability. This grade is... view more

Esacure KIP 150 by IGM Resins is an oligomeric polyfunctional alpha-hydroxyketone based photoinitiator with low VOC. It offers high reactivity, non-yellowing properties, no migration and low odor. It... view more

Esacure KIP 75 LT by IGM Resins acts as a photoinitiator. It is a liquid mixture of oligomeric alpha-hydroxy ketone and tripropylene glycol. It offers high reactivity, non-yellowing properties and low... view more

Esacure TZM by IGM Resins is a liquid mixture of benzophenone and 4-methylbenzophenone based type II free radical photoinitiator. It offers high solubility and compatibility. It exhibits high... view more

Omnicat 250 by IGM Resins is a versatile photoinitiator for cationic polymerization of epoxy- or oxetane-based photocurable systems upon light exposure. It can be used to effectively in adhesives &... view more