B-Tough™ A1 by Cargill is an epoxy functional, reactive toughening agent with lowest polarity. It provides impact strength to structural adhesives without impacting the hardness of the matrix... view more

B-Tough™ A2 by Cargill is a low polarity, epoxy functional, reactive toughening agent. It offers impact strength to structural adhesives without impacting the hardness of the matrix. It protects... view more

B-Tough™ A3 by Cargill is a medium polarity, epoxy functional, reactive toughening agent. It provides impact strength to structural adhesives without impacting the hardness of the matrix. It... view more

Priamine™ 1073 by Cargill is a low viscous, bio-based dimer diamine building block. It is designed for use in polyamide hot melts, polyurea and epoxy adhesives & sealants. It can also be used as... view more

Priamine™ 1074 by Cargill is a low viscous, bio-based dimer diamine building block. It offers high flexibility even in low temperatures, hydrophobicity, hydrolytic stability, moisture repellency and... view more

Eastman 168™ non-phthalate plasticizer by Eastman is a non-orthopthalate, general purpose plasticizer for PVC. Possesses performance equal or better than most ortho-phthalate plasticizers. Offers... view more

Eastman VersaBond™ Plasticizer is a phthalate-free blend of esters (100% concentration) by Eastman. Exhibits better shore hardness, viscosity, tensile strength and water uptake as compared to... view more

Admex™ 770 polymeric plasticizer by Eastman is a medium-to-high molecular weight polymeric based on a blend of adipic and phthalic acid. It is characterized by a mild ester odor and light color... view more

Benzoflex™ 2-45 Plasticizer is oxydiethylene dibenzoate by Eastman. It is an excellent solvator for polyvinyl chloride (PVC) and also shows compatibility with it. Flexible vinyl formulations which... view more

Eastman Effusion™ Plasticizer is a non-phthalate, mild odor plasticizer by Eastman. Provides lower plastisol viscosity, excellent low temperature flexibility, and fusion rates similar to typical... view more

RHEOLATE® 185 by Elementis is a low to mid-shear, low viscosity, solvent- & APEO-free, acrylic thickener. This shear thinning rheological additive is a cost-effective alkali soluble associative... view more

KANEKA SILYL™ SAX220 by Kaneka is a silyl-terminated polyether (STPE) used as a base resin for producing high-performance moisture cure adhesives and sealants utilizing either a hot or cold process... view more

Cardolite® NX-5607 is phenalkamine epoxy curing agent that has favorable labeling, faster cure at low temperature, i.e. 0°C. Utilized as a solvent free hardener for epoxy adhesives and as a... view more

Cardolite® NX-5608 is a phenalkamine epoxy curing agent that has favorable labeling, faster cure at low temperature, i.e. 0°C. Utilized as a solvent free hardener for epoxy adhesives and as a... view more

Norsocryl® 2EHA by Arkema is 2-ethylhexyl acrylate. Possesses the ability to polymerize with each other and copolymerize with other monomers to produce polymers. Applications include resins and... view more

Norsocryl® AA by Arkema is acrylic acid. Offers hydrosolubility and the carboxylic acid functionality provides anionic character and reactivity with alcohols and epoxides. Recommended for... view more

Norsocryl® BA by Arkema is butyl acrylate. Applications in resins and dispersions for adhesives and glues. Norsocryl® BA is also used in UV-curing adhesives for building and construction... view more

Oleris® Dibutyl Sebacate by Arkema is a non-toxic dibutyl sebacate. It is a colorless, odorless, transparent oily liquid. Acts as a cold resistant plasticizer for synthetic resins and rubbers... view more

Proxel™ GXL by Arxada is a 20% aqueous dipropylene glycol solution of 1,2-benzisothiazolin-3-one. It is a biocide for the preservation of industrial water-based products against spoilage from... view more

Drewplus® T-3200 by Ashland Specialty Chemical is a defoamer or foam control agent. It is formulated without the use of alkylphenolethoxylates (APEO), and are available in a variety of... view more

High performance, non-ionic formulation of silica derivatives, paraffinic oil, esters and water. Used as a foam control agent for water-based systems such as pressure sensitive adhesives and... view more

Drewplus® TW-4501 by Ashland is a foam control agent for water-based systems. It is a high performance, non-ionic formulation of silica- and wax derivatives and mineral oil. It offers very good... view more

2-Ethylhexyl acrylate (EHA) by BASF readily undergoes addition reactions with a wide variety of organic and inorganic compounds and forms homopolymers and copolymers. Copolymers of 2-Ethylhexyl... view more

2-Hydroxyethyl acrylate (HEA) by BASF forms low VOC homopolymers and copolymers. It imparts chemical resistance, crosslinking, adhesion, scratch resistance, weatherability and low VOC. Copolymers of... view more

2-Hydroxypropyl acrylate (HPA) by BASF is an acrylate monomer. It readily undergoes addition reactions with a wide variety of organic and inorganic compounds and forms homopolymers and copolymers... view more

2-Propylheptyl Acrylate high grade (2-PHA HG) by BASF imparts chemical resistance, hydrophobicity, adhesion and weatherability to polymers. It forms homopolymers and copolymers which can be prepared... view more

2-Propylheptyl Acrylate technical grade (2-PHA TG) by BASF imparts chemical resistance, hydrophobicity, adhesion and weatherability to polymers. It forms homopolymers and copolymers which can be... view more

Cyclohexane by Braskem is a high purity, cyclic aliphatic hydrocarbon solvent. It is used in adhesives formulation for footwear, furniture, mattresses, and automotive industries. Cyclohexane has a... view more

Dicyclopentadiene by Braskem is a monomer obtained through the C5 stream. It is used as a raw material in the production of various resins, such as polyesters and hydrocarbon resins in adhesive... view more

Methyl Isobutyl Ketone (MIBK) by Celanese is used as a solvent for adhesive systems. It exhibits a faint ketonic and camphor-like odor. This solvent is stable and does not polymerize. Methyl... view more

Mowilith® DHF 57 S by Celanese is a homopolymer emulsion of vinyl acetate. It is particularly suitable for the manufacturing of quick-setting, high quality, wood adhesives for which a high thermal... view more

Vinamul® 3479 by Celanese is a surfactant stabilized vinyl acetate, vinyl chloride and ethylene terpolymer dispersion. It exhibits very good block resistance, high bond security, excellent... view more

Vinamul® 8330 by Celanese is an aqueous, polyvinyl alcohol (PVOH) and surfactant stabilized polyvinyl acetate polymer dispersion. It exhibits fast drying & good lay-flat and offers a very good film... view more

Vinamul® 8481 by Celanese is an aqueous, polyvinyl alcohol stabilized polyvinyl acetate polymer dispersion. It exhibits very fast setting speed, high level of wet tack, high cohesive strength, high... view more

Coapur™ 3020 by Coatex (Arkema Group) is a water-borne, non-ionic rheology modifier and thickener. Exhibits good water resistance, excellent flow, homogeneous film build and good leveling. Offers... view more

Coapur™ XS 71 is a non-ionic, water-borne rheology modifier and thickener by Coatex (Arkema Group). Shows improved transfer and good leveling properties. Designed for tapes, labels and pressure... view more

RHEOTECH™ 2800 by Coatex (Arkema Group) is a water-borne, APE-free, hydrophobically modified alkali swellable acrylic (HASE) thickener. It combines the benefits of HASE with flow and leveling... view more

RHEOTECH™ 3800 is a water-borne, hydrophobically modified alkali swellable acrylic (HASE) thickener and rheology modifier by Coatex (Arkema Group). It is a low VOC, APE-free alternative to PU... view more

NeoRez® R-9621 by Covestro is an aliphatic polyester waterborne urethane for use in industrial laminating adhesives requiring a low VOC. Has good adhesion to vinyl, polyester and low-density... view more

ECO Brij™ L4 by Croda is a 100% bio-based, non-ionic surfactant. It is produced from naturally occurring straight chain lauryl alcohol. This hydrolytically stable grade is used as a versatile &... view more

ECO Brij™ S10 by Croda is a 100% bio-based, low HLB, non-ionic surfactant. It is also used as a versatile co-emulsifier for O/W emulsions and wetting & dispersing agent. This hydrolytically stable... view more

ECO Tween™ 20 by Croda is a 100% bio-based, non-ionic surfactant used as a dispersant, adjuvant, wetting agent and solubilizer. It also acts as a versatile O/W emulsifier. It is easy to handle and... view more

Fluilan™ by Croda is a lanolin-based adhesive detackifier and release aid. This water in oil emuslsion stabilizer is a skin friendly additive. Fluilan™ can be used to reduce tackiness of an adhesive... view more

Maxemul™ 6106 by Croda is an anionic, co-polymerizable surfactant designed for use as a stabilizer in latex binders typically used in pressure-sensitive adhesives and sealants. It is reactive... view more