Photoinitiator. Used in adhesives... view more

2,2-dimethoxy-2-phenylacetophenone. Used in adhesives. Offers good shelf stability, a fast cure rate and thorough curing... view more

Methyl-o-benzoylbenzoate. Used in adhesives... view more

2,4,6-trimethyldiphenylphosphineoxide. Used in adhesives. Offers the advantage of good shelf stability, fast and thorough cure... view more

Corona™ 9 by Croda is skin-friendly, water in oil emulsion stabilizer that reduced tackiness. It is a scratch-resistant and anti-blocking additive. It prevents scarring on the surface, especially at... view more

ECO Brij™ C10 by Croda is a 100% bio-based, non-ionic, surfactant. It is produced from naturally occurring straight chain cetyl alcohol. It is also used as a versatile co-emulsifier for O/W... view more

ECO Brij™ C2 by Croda is a 100% bio-based, non-ionic, surfactant. It is also used as a versatile co-emulsifier for O/W emulsions wetting agent, dispersing agent and solubilizer. This hydrolytically... view more

ECO Brij™ CS20 by Croda is a 100% bio-based, high HLB, non-ionic surfactant. It is also used as a versatile emulsifier for O/W emulsions and aqueous wetting & dispersing agent. This hydrolytically... view more

ECO Brij™ S20 by Croda is a 100% bio-based, high HLB, non-ionic surfactant. This hydrolytically stable grade is produced from naturally occurring straight chain stearyl alcohol. It is used as a... view more

Finntalc M03 by Elementis is floated, ultra-fine, laminar talc (Mg-silicate). Finntalc M03 is recommended for polyester putties... view more

Finntalc M03C by Elementis is talc (Mg-silicate). Finntalc M03C is recommended for polyester putties... view more

Finntalc M04SL by Elementis is floated, very fine, laminar talc (Mg-silicate). It shows high brightness. It is low in soluble iron. Finntalc M04SL is recommended for polyester putties... view more

Finntalc M04SLC by Elementis is floated, very fine, laminar talc (Mg-silicate). It shows high brightness. It is low in soluble iron. Finntalc M04SLC is recommended for polyester putties... view more

Finntalc M05N by Elementis is floated, very fine, laminar talc (Mg-silicate). Finntalc M05N is recommended for polyester putties... view more

2-(2’-hydroxy-3’-s-butyl-5’-t-butyl-phenyl)-benzotriazole. Acts as a light stabilizer/UV absorber. It offers broad range UV absorption, low color, low volatility and excellent solubility. It is a... view more

AEROSIL® 255 by Evonik is hydrophilic fumed silica. It exhibits rheology and thixotropy control of liquid systems, binders, polymers etc. It provides improvement of free flow and anti-caking... view more

Flytac 102 -100 by Guangzhou Flying Dragon is a pentaerythritol rosin ester. It acts as a tackifier. Possesses the properties of high viscosity, low VOC, excellent heat, aging stability, excellent polymer... view more

Flytac 102 -100F by Guangzhou Flying Dragon is pentaerythritol rosin ester. Acts as a tackifier. Possesses the properties of high viscosity, low VOC, excellent heat, aging stability, excellent polymer compatibility... view more

Flytac 103 -90 by Guangzhou Flying Dragon is glycerol rosin ester. Acts as a tackifier. Possesses high viscosity, low VOC, excellent heat and aging stability, excellent polymer compatibility etc. Used in EVA, SBS... view more

Flytac 103 -E by Guangzhou Flying Dragon is glycerol rosin ester. Acts as a tackifier. Possesses high viscosity, low VOC, excellent heat and aging stability, excellent polymer compatibility etc. Used in EVA, SBS... view more

Synthetic polymer in a 100% solid form. When in solution, designed to be a release agent for adhesive tapes... view more

Fine ground calcium carbonate. It is an odorless, exceptionally pure, bright filler and extender produced from natural high calcium marble. Exhibits consistent sizing, high brightness and high... view more

Fine ground calcium carbonate. It is an odorless, exceptionally pure, bright filler and extender produced from natural high calcium marble. Exhibits consistent sizing, high brightness and high... view more

Fine ground calcium carbonate. It is an odorless, exceptionally pure, bright filler and extender produced from natural high calcium marble. Exhibits consistent sizing, high brightness and high... view more

Fine ground calcium carbonate. It is an odorless, exceptionally pure, bright filler and extender produced from natural high calcium marble. Exhibits consistent sizing, high brightness and high... view more

Fine ground calcium carbonate. It is an odorless, exceptionally pure, bright filler and extender produced from natural high calcium marble. Exhibits consistent sizing, high brightness and high... view more

SYLVARES™ ZT 105LT by KRATON acts as a tackifier. It is a light color, low odor, heat stable modified terpene resin. It provides an excellent balance of properties when compounded with styrenic... view more

Uniplex 260 by Lanxess is glyceryl tribenzoate-based plasticizer. It promotes heat-sealability, adhesion and creates a moisture barrier. It is compatible with polymers, including polyester, acrylic... view more

Weather resistant titanium dioxide. It has a rutile crystallographic structure, nontoxic, non-flammable, very good optical properties (a high brightening and hiding power) and is chemically... view more

Reaxis® C248 by Reaxis is solid amorphous catalyst. Used in low temperature-reactions and high temperature-reactions. Also suits for the transesterification of vinyl acetate or acrylic acid... view more

Low melting range, highly effective hindered amine. Used as a light stabilizer in adhesives, sealants and plastisols. Possesses compatibility with polypropylene, polyethylene, styrenics, unsaturated... view more

Chlorendic Anhydride by Velsicol is 1,4,5,6,7,7-hexachloro-8,9,10-trinorborn-5-ene-2,3-dicarboxylic anhydride. Acts as a flame retardant. It has stable chlorinated bicyclic structure and offers improved... view more