High performance, non-ionic formulation of silica derivatives, paraffinic oil, esters and water. Used as a foam control agent for water-based systems such as pressure sensitive adhesives and... view more

ECO Brij™ C20 by Croda is a 100% bio-based, high HLB, non-ionic surfactant. It is used as a versatile emulsifier for O/W emulsions and aqueous wetting & dispersing agent. It is produced from... view more

ECO Brij™ L4 by Croda is a 100% bio-based, non-ionic surfactant. It is produced from naturally occurring straight chain lauryl alcohol. This hydrolytically stable grade is used as a versatile &... view more

ECO Brij™ S10 by Croda is a 100% bio-based, low HLB, non-ionic surfactant. It is also used as a versatile co-emulsifier for O/W emulsions and wetting & dispersing agent. This hydrolytically stable... view more

ECO Brij™ S721 by Croda is a 100% bio-based, high HLB, non-ionic surfactant. It is produced from naturally occurring straight chain stearyl alcohol. This additive is also used as a versatile... view more

Hypermer™ PS3 by Croda acts as a polymeric surfactant as well as dispersing agent. It is used for organic as well as inorganic particles in medium polarity liquids, polyacrylate oligomers, polyester... view more

Eastman™ Butyl Acetate by Eastman is a readily biodegradable, medium boiling ester solvent. It offers good solvent activity, high electrical resistance and low MIR value, surface tension and water solubility... view more

Silcolease® PC-195 NXL by Elkem Silicones is a biocompatible polyaddition silicone emulsion. Acts as a release modifier. Offers incremental levels release, good cures with low levels of extractable... view more

Polyester adipate. Acts as a polymeric plasticizer. It is highly efficient and very easy processing. Compatible with acrylic resins, nitrile, nitrocellulose, polymethyl methacrylate, polyvinyl... view more

Jeffamine® M-2095 Amine by Huntsman is polyethylene glycol (PEG)-based polyetheramine. It is a hydrophilic polyether monoamine of approximately 2000 molecular weight. Exhibits moderate viscosity... view more

Jeffamine® M-3085 Amine by Huntsman is a hydrophilic polyether monoamine of approximately 3000 molecular weight with a PO/EO mole ratio of about 8/58. Exhibits moderate viscosity and low vapor... view more

Esacure 1001 M by IGM Resins is a difunctional Type II photoinitiator of the ketosulphone class. It is used to initiate radical polymerization of unsaturated oligomers such as acrylates after UV... view more

Omnirad 184 by IGM Resins is a highly efficient, non-yellowing photoinitiator. It is used to initiate the photo-polymerization of chemically unsaturated prepolymers like acrylates, in combination with... view more

K-FLEX® 500 by LANXESS (previously Emerald Kalama Chemical) is a non-phthalate, general-purpose, polar plasticizer. It is a blend of di-propylene glycol dibenzoate and diethylene glycol dibenzoate... view more

K-FLEX® 850P by LANXESS (previously Emerald Kalama Chemical) is a non-phthalate, plasticizer. It is a blend of dipropylene glycol- and diethylene glycol dibenzoate. It is similar in composition to... view more

K-FLEX® 850S by LANXESS (previously Emerald Kalama Chemical) is non-phthalate, low-VOC plasticizer. It is a blend of dipropylene glycol dibenzoate and diethylene glycol dibenzoate. It achieves... view more

K-FLEX® 975P by LANXESS (previously Emerald Kalama Chemical) is a non-phthalate, low vapor pressure-VOC plasticizer. It is a blend of diethylene glycol-, dipropylene glycol- and propylene glycol... view more