Hyperbranched polyester amide. Acts as a crosslinking agent. It is a water-borne, nonionic and hydroxyl group-containing anti-splattering additive based on hybrane technology to enhance the transfer... view more

Corona™ 9 by Croda is skin-friendly, water in oil emulsion stabilizer that reduced tackiness. It is a scratch-resistant and anti-blocking additive. It prevents scarring on the surface, especially at... view more

ECO Brij™ C20 by Croda is a 100% bio-based, high HLB, non-ionic surfactant. It is used as a versatile emulsifier for O/W emulsions and aqueous wetting & dispersing agent. It is produced from... view more

ECO Brij™ L4 by Croda is a 100% bio-based, non-ionic surfactant. It is produced from naturally occurring straight chain lauryl alcohol. This hydrolytically stable grade is used as a versatile &... view more

ECO Brij™ S10 by Croda is a 100% bio-based, low HLB, non-ionic surfactant. It is also used as a versatile co-emulsifier for O/W emulsions and wetting & dispersing agent. This hydrolytically stable... view more

ECO Brij™ S721 by Croda is a 100% bio-based, high HLB, non-ionic surfactant. It is produced from naturally occurring straight chain stearyl alcohol. This additive is also used as a versatile... view more

Eastman™ Butyl Acetate by Eastman is a readily biodegradable, medium boiling ester solvent. It offers good solvent activity, high electrical resistance and low MIR value, surface tension and water solubility... view more

Finntalc M15 by Elementis is floated, medium sized, laminar talc (Mg-silicate). It is recommended for adhesives and polyester putties... view more

Finntalc M30 by Elementis is floated, coarse, laminar talc (Mg-silicate). It is recommended for adhesives and polyester putties... view more

Finntalc M40 by Elementis is floated, coarse, double air classified, laminar talc (Mg-silicate). It shows low oil absorption. It is recommended for adhesives and polyester putties... view more

Finntalc M50 by Elementis is floated, very coarse, double air classified, laminar talc (Mg-silicate). It shows low oil absorption. Finntalc M50 is recommended for adhesives and polyester putties... view more

Finntalc M65 by Elementis is talc (Mg-silicate). It is recommended for adhesives and polyester putties... view more

JEFFCAT® TD-33A by Huntsman is 33% triethylenediamine solution in dipropylene glycol. Acts as a catalyst. Used for elastomers, RIM, RRIM, rigid- and packaging foam. JEFFCAT® TD-33A is suitable for... view more

JEFFCAT® Z-130 by Huntsman is a low emission reactive gel catalyst. Used for elastomers, RIM, RRIM, rigid polyurethane- and packaging foam. JEFFCAT® Z-130 is suitable for ester and ether slabstock... view more

JEFFCAT® Z-80 by Huntsman is a low odor N,N,N, -tris(3-dimethylaminopropyl-) amine. Acts as a catalyst. Used for elastomers, RIM, RRIM, rigid polyurethane- and packaging foam. JEFFCAT® Z-80 is... view more

JEFFCAT® ZR-40 by Huntsman is N,N,N',N'',N''-pentamethyl-dipropylenetriamine. It is a low odor catalyst. Provides good balance between gel and blow. It is very useful in cold-molded HR foams. Used... view more

Omnirad 2100 by IGM Resins acts as a free-radical type I photoinitiator. It is a highly efficient liquid curing agent to initiate radical polymerization of acrylates and unsaturated polyesters after... view more

Trixene® BI 7641 by Lanxess is a cross-linking agent for hydroxyl-functional resins (polyester, urethane, acrylic). DMP is the blocking agent for this aromatic blocked TDI prepolymer type... view more